Selective Laser Sintering – Binding Mechanism And Assistance In Medical Applications

1. Levy G.N., Schindel R., Kruth J.P.: Rapid manufacturing and rapid tooling with layer manufacturing technologies: state of the art and future perspectives, CIRP Annals (2003), 52(2): 589-609.10.1016/S0007-8506(07)60206-6Search in Google Scholar

2. Miecielica M.: Analysis of selected methods for rapid prototyping, (in Polish), PW IIPiB (2007), Warsaw.Search in Google Scholar

3. Ruszaj A.: Unconventional methods of fabrication machines and tools, (in Polish), IOS (1999), Krakow.Search in Google Scholar

4. Kruth J.P., Leu M. C., Nakagawa T.:Progress in additive manufacturing and rapid prototyping, CIRP Annals(1998), 47(2): 525-540.10.1016/S0007-8506(07)63240-5Search in Google Scholar

5. Gibson I., Rosen D. W., Stucker B.: Additive Manufacturing Technologies. Rapid Prototyping to Direct Digital Manufacturing, Springer (2010), New York.10.1007/978-1-4419-1120-9Search in Google Scholar

6. Cooper K.: Rapid prototyping technology – selection and application, Marcel Dekker (2001), New York.Search in Google Scholar

7. Bourell D.L., Beaman J.J.: Materials issues in rapid prototyping, Proc. VRAP, Leiria (2005): 305-310.Search in Google Scholar

8. Hudak R., Šarik M., Dadej R., Živčák J., Harachová D.: Material And Thermal Analysis Of Laser Sinterted Products, Acta Mechanica Et Automatica(2013), 7(1):115-19.10.2478/ama-2013-0003Search in Google Scholar

9. Kumar S.: Selective Laser Sintering: A Qualitative and Objective Approach, JOM, Springer-Verlag (2003), 55(10): 43-47.10.1007/s11837-003-0175-ySearch in Google Scholar

10. Bourell D.L., Marcus H.L., Barlow J.W., Beaman J.J. (1992), Selective laser sintering of metals and ceramics, Int. J. Powder Metallurgy, 28 (4): 369-381.Search in Google Scholar

11. Simchi A., Pohl H.:Effects of laser sintering processing parameters on the microstructure and densification of iron powder, Materials Science & Engineering: A, Elsevier (2003), 359:119-128.10.1016/S0921-5093(03)00341-1Search in Google Scholar

12. Fischer P., Romano V., Weber H.P., Karapatis N. P., Boillat E., Glardon R.: Sintering of commercially pure titanium powder with a Nd:YAG laser source, Acta Materialia (2003), 51:1651-1662.10.1016/S1359-6454(02)00567-0Search in Google Scholar

13. Ghanekar A., Crawford R.: Optimization of SLS Process Parameters using D-Optimality, Douglas Watson National Instruments Inc, Austin, TX (1992): 348-362.Search in Google Scholar

14. Kruth J.P., Wang X., Laoui T., Froyen L.: Lasers and materials in selective laser sintering, Assembly Automation (2003), 23(4): 357-371.10.1108/01445150310698652Search in Google Scholar

15. Laoui T., Wang X., Childs T.H.C., Kruth J.P., Froyen L.: Laser penetration in a powder bed during selective laser sintering of metal powders: simulations versus experiments, Proc. SFF Symp., Austin (2000): 7-9.Search in Google Scholar

16. Bagaria V., Rasalkar D., Bagaria S. J., Ilyas J.: Medical Applications of Rapid Prototyping – A New Horizon, Advanced Applications of Rapid Prototyping Technology in Modern Engineering, 1st ed., In Tech 2011:1-21.10.5772/20058Search in Google Scholar

17. Kruth J.P., Levy G., Klocke F., Childs T.H.C.: Consolidation phenomena in laser and powder-bed based layered manufacturing, Annals of the CIRP (2010), 56(2): 730-75910.1016/j.cirp.2007.10.004Search in Google Scholar

18. Das S.: Physical aspects of process control in selective laser sintering of metals, Advanced Engineering Materials (2003), 5: 701-711.10.1002/adem.200310099Search in Google Scholar

19. Childs T.H.C., Hauser C., Badrossamay M.: Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling, Proc. IMechE part B, J. Engineering Manufacture (2005), 219: 339-357.10.1243/095440505X8109Search in Google Scholar

20. Dimov S., Pham D.T., et al.: Rapid tooling applications of the selective laser sintering process, Assembly Automation (2001), 21(4): 296-302.10.1108/EUM0000000006011Search in Google Scholar

21. Senthilkumaran K., Pandey P. M., Rao P. V. M.: Influence of building strategies on the accuracy of parts in selective laser sintering, Materials and Design (2009), 30: 2946-2954.10.1016/j.matdes.2009.01.009Search in Google Scholar

22. Lu L., Fuh J. Y. H., Wong Y. S.: Laser-induced materials and processes for rapid prototyping, Springer Science & Business Media (2010): 89-142.Search in Google Scholar

23. Wang X. C., Laoui T., Bonse J., Kruth J. P., Lauwers B., Froyen L.: Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation, The Internation Journal of Advanced Manufacturing Technology (2002), 19: 351-357.10.1007/s001700200024Search in Google Scholar

24. Kruth J.P., Mercelis P., Van Vaerenbergh J., Froyen L., Rombouts M.: Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyping J. (2005), 55(1): 26-36.10.1108/13552540510573365Search in Google Scholar

25. Kruth J. P., Mercelis P., Froyen L., Rombouts M.: Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting, Rapid prototyping journal (2005),11 (1): 26-36.10.1108/13552540510573365Search in Google Scholar

26. Dobrzański L. A.: Introduction to Materials Science, (in Polish), Silesian University of Technology (2007), Gliwice.Search in Google Scholar

27. Bednarczyk I., Lesz S., Puchała M., Szczucka – Lasota B., Warchoł A.: Nauka o materiałach i mechanika, Wyższa Szkoła Zarządzania Ochroną Pracy (2010), Katowice.Search in Google Scholar

28. Szucki T.: Inżynieria Materiałowa: materiałoznawstwo, Oficyna Wydawnicza Politechniki Warszawskiej(1999), Warszawa.Search in Google Scholar

29. Storch S., Nellessen D., Schaefer G., Reiter R.:Selective laser sintering: qualifying analysis of metal based powder systems for automotive applications, Rapid Prototyping Journal (2003), 9: 240-252.10.1108/13552540310489622Search in Google Scholar

30. Kruth J.P., Froyen L., Van Vaerenbergh J., Mercelis P., Rombouts M., Lauwers B.: Selective laser melting of iron based powder, J. Materials Processing Technology(2004), 149(1-3): 616 – 622.10.1016/j.jmatprotec.2003.11.051Search in Google Scholar

31. German R.M.:Sintering Theory and Practice, John Wiley and Sons (1996), New York.Search in Google Scholar

32. Gibson I., Cheung L.K.., Chow S.P., Cheung W.L., Beh S.L., Savalani M., Lee S.H.: The use of rapid prototyping to assist medical applications, Rapid Prototyping Journal (2006), 12(1): 53 – 58.10.1108/13552540610637273Search in Google Scholar

33. Kruth J.P., Van der Scheuren B., Bonse J.E., Morren B.:Basic powder metallurgical aspects in selective metal powder sintering, CIRP Annals (1996), 45(1): 183-186.10.1016/S0007-8506(07)63043-1Search in Google Scholar

34. Gusarov A.V.: Mechanisms of selective laser sintering and heat transfert in Ti powder, Rapid Prototyping J. (2003), 9(5): 314-326.10.1108/13552540310502211Search in Google Scholar

35. Gibson I., Shi D.: Material properties and fabrication parameters in selective laser sintering process, Rapid Prototyping Journal (1997), 3(4):129-136.10.1108/13552549710191836Search in Google Scholar

36. Kruth J.P., Vandenbroucke B., Van Vaerenbergh J., Naert I.: Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM, Proc. VRAP, Leiria(2005): 139-146.Search in Google Scholar

37. Vail N.K., Swain D., Fox W.C., Aufdemorte T.B., Lee G., Barlow J.W.: Materials for biomedical applications, Proc. SFF Symp., Austin (1998): 621-628.Search in Google Scholar

38. Williams J. D., Deckard C. R. (1998), Advances in modelling the effects of selected parameters on the SLS process, Rapid Prototyping Journal, 4(2): 90-100.10.1108/13552549810210257Search in Google Scholar

39. Smith M.: A Preliminary experience with medical applications of rapid prototyping by selective laser sintering, Med. End. Phys. (1996), 19: 90-96.10.1016/S1350-4533(96)00039-2Search in Google Scholar

40. Dalgarno K.W., Wood D.J., et al.: Mechanical properties and biological responses of bioactive glass ceramic processed using indirect SLS, Proc. SFF Symp., Austin (2005):132-140.Search in Google Scholar

41. Miecielica M.: Rapid prototyping – methods and applicability in biomedical engineering, (in Polish) AGH (2009), Krakow.Search in Google Scholar

42. Mazzoli A.: Selective laser sintering in biomedical engineering, Med. Biol. Eng. Comput (2013): 245-256.10.1007/s11517-012-1001-xSearch in Google Scholar

43. Tan K. H., Chua C. K., Leong K. F., Cheah C. M., Cheang P., Abu Bakar M. S., Cha S. W.: Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomoposite blends, Biomaterials (2013), 24: 3115-3123.10.1016/S0142-9612(03)00131-5Search in Google Scholar

44. Antonov E.N., Bagratashvili V.N., et al.: Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering, Advanced Materials (2005), 17(3): 327-333.10.1002/adma.200400838185544417464361Search in Google Scholar

45. Chua C.K., Leong K.F., Tan K.H., Wiria F.E., Cheah C. M.: Development of tissue scaffolds using selective laser sintering of polyvinylalcohol/hydroxyapatite biocomposite for craniofacial and joint defects, J. Materials Science: Materials in Medicine (2004), 15(10): 1113-1121.10.1023/B:JMSM.0000046393.81449.a5Search in Google Scholar

46. Cruz F., Simoes J., Coole T., Bocking C.: Direct manufacture of hydroxyapatite based bone implants by selective laser sintering, Proc. VRAP, Leiria(2005), 119-126.Search in Google Scholar

47. Abe F., Osakada K., Kitamura Y., Matsumoto M., Shiomi M.: Manufacturing of titanium parts for medical purposes by selective laser melting, Proc. Rapid Prototyping (2000): 288-293.Search in Google Scholar

48. Torres K., Staśkiewicz G., Śnieżyński M., Drop A., Maciejewski R.: Application of rapid prototyping techniques for modelling of anatomical structures in medical training and education, Folia Morphol, Via Medica (2010), 70: 1-4.Search in Google Scholar

49. Wu W.Z., Yan M.G.: Development of polymer coated metallic powder for selective laser sintering (SLS) process, J. Adv. Materials (2002), 34(2): 25-28.Search in Google Scholar

50. Cruz F., Coole T., Bocking C., Simoes J.: Selective laser sintering of customized medical implants using biocomposite materials, Tech. Vjesn. (2003), 10(2): 23-27.Search in Google Scholar