[[1] Percina M., Aslantas K., Ucuna I., Kaynakb Y., Cicekc A., Micro-drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating, Precision Engineering, Vol. 45/2016, 450–462.10.1016/j.precisioneng.2016.02.015]Search in Google Scholar
[[2] Rajurkar K.P, Sundaram M.M., Malshe A.P., Review of Electrochemical and Electrodischarge Machining, Procedia CIRP, Vol. 6/2013, 13–26.10.1016/j.procir.2013.03.002]Search in Google Scholar
[[3] Skoczypiec S., Machno M., Bizoń W., The capabilities of electrodischarge microdrilling of high aspect ratio holes in ceramic materials, Management and Production Engineering Review Vol. 6-3/2015, 61–69.10.1515/mper-2015-0027]Search in Google Scholar
[[4] Plaza S., Sanchez J.A., at all, Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode, Prec. Eng. Vol. 38/2014, 821–827.10.1016/j.precisioneng.2014.04.010]Search in Google Scholar
[[5] Skoczypiec S., Ruszaj A., A sequential electrochemical-electrodischarge process for micro part manufacturing Prec. Eng., Vol. 38/2014, 680–690.10.1016/j.precisioneng.2014.03.007]Search in Google Scholar
[[6] Hasan M., Zhao J., Jiang Z., A review of modern advancements in micro drilling techniques Journal of Manufacturing Process, Vol. 29/2017, 343–375.10.1016/j.jmapro.2017.08.006]Search in Google Scholar
[[7] Kliuev M., Baumgart C., Wegener K., Fluid dynamics in Electrode Flushing Channel and Electrode-Workpiece Gap During EDM Drilling, “Procedia CIRP”, Vol. 68/2018, 254–259.10.1016/j.procir.2017.12.058]Search in Google Scholar
[[8] Li J., Yin G., Wang C., Guo X., Yu Z., Prediction of aspect ratio of a micro hole drilled by EDM “Journal of Mechanical Science and Technology”, Vol. 27/2013, 185–190.10.1007/s12206-012-1214-9]Search in Google Scholar
[[9] Kamal K., Rawalb S.K., Singha V.P., Anu B., Experimental Study on Diametric Expansion and Taper Rate in EDM Drilling For High Aspect Ratio Micro Holes in High Strength Materials, “Materials Today: Proceedings”, Vol. 5/2018, 7363–7372.10.1016/j.matpr.2017.11.406]Search in Google Scholar
[[10] Risto M., Haas R., Munz M., Optimization of the EDM drilling process to increase the productivity and geometrical accuracy, “Procedia CIRP” Vol. 42/2016, 537–542.10.1016/j.procir.2016.02.247]Search in Google Scholar
[[11] Mowwer T.D., Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining, “International Journal of Fatigue”, Vol. 64/2014, 84–96.10.1016/j.ijfatigue.2014.02.018]Search in Google Scholar
[[12] Manjaiah M., Narendranath S., Basavarajappa S., A review on machining of titanium based alloys using EDM and WEDM, “Rev. Adv. Mater. Sci.” Vol. 36/2014, 89–111.]Search in Google Scholar
[[13] Antar M., Chantzis D. et al., High Speed EDM and Laser Drilling of Aerospace Alloys, “Procedia CIRP”, Vol. 42/2016, 526–531.10.1016/j.procir.2016.02.245]Search in Google Scholar
[[14] Hasçalık A., Çaydas U., Electrical discharge machining of titanium alloy (Ti–6Al–4V), “Applied Surface Science”, Vol. 253/2007, 9007–9016.10.1016/j.apsusc.2007.05.031]Search in Google Scholar
[[15] Sanchez J. A., Plaza S., et al., Electrode set-up for EDM-drilling of large aspect-ratio microholes, “Procedia CIRP” Vol. 6/2013, 274–279.10.1016/j.procir.2013.03.009]Search in Google Scholar
[[16] Ezugwu E.O., Wang Z.M., Titanium alloys and their machinability – a review, “Journal of Materials Processing Technology”, Vol. 68/1997, 262–274.10.1016/S0924-0136(96)00030-1]Search in Google Scholar
[[17] Hascalik A., Caydas U., Electrical discharge machining of titanium alloy (Ti–6Al–4V), “Applied Surface Science”, Vol. 253/2007, 9007–9016.10.1016/j.apsusc.2007.05.031]Search in Google Scholar
[[18] Wansheng Z., Zhenlong W., Schichun D., Guanxin C., Hongyu W., Ultrasonic and electro discharge machining to deep and small hole on titanium alloy, “Journal of Materials Processing Technology”, Vol. 120/2002, 101–106.10.1016/S0924-0136(01)01149-9]Search in Google Scholar
[[19] Fonda P., Wang Z., Yamazaki K., Akutsu Y., A fundamental study on Ti–6Al–4V’s thermal and electrical properties and their relation to EDM productivity, “J. Mater. Process. Technol”, Vol. 202/2008, 583–589.10.1016/j.jmatprotec.2007.09.060]Search in Google Scholar