1. bookVolume 115 (2018): Issue 9 (September 2018)
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
access type Open Access

The application of computed tomography in the automotive world – how industrial CT works

Published Online: 21 May 2020
Volume & Issue: Volume 115 (2018) - Issue 9 (September 2018)
Page range: 181 - 187
Received: 12 Aug 2018
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
Abstract

This paper shows how industrial computed tomography (CT) works, its benefits and where it can be used in automotive world. As a non-destructive quality control technique (NDT), CT allows not only the measurement and evaluation of external and internal geometry, but is also useful for making reports with a visualisation of an entire component, e.g. a map of shape deviation and internal structural defects.

Keywords

[1] https://www.nikonmetrology.com/en-gb/product/xt-h-225-st (access: 08.06.2018).10.1055/a-0666-5852Search in Google Scholar

[2] Ratajczyk E., Rentgenowska tomografia komputerowa, CT) do zadań przemysłowych, Pomiary automatyka Robotyka. 5, 2012, 104–113.Search in Google Scholar

[3] Nałęcz M., Chmielewski L., Kulikowski J.L., Nowakowski A., „Biocybernetyka i inżynieria biomedyczna 2000 - TOM 8 OBRA-ZOWANIE BIOMEDYCZNE, Akademicka Oficyna Wydawnicza EXIT, Warszawa 2003.Search in Google Scholar

[4] Królikowski M., Burbelko A., Kwaśniewska-Królikowska D., Wykorzystanie tomografii komputerowej w defektoskopii odlewów z żeliwa sferoidalnego, ARCHIVES of FOUNDRY ENGINEERING 15/4, Vol. 14, Special Issue 4, 2014, 71–76.Search in Google Scholar

[5] Thompson A., McNally D., Maskery I., Leach R.K., X-ray computed tomography and additive manufacturing in medicine: a review, International Journal of Metrology and Quality Engineering, 8, 17, 2017, 1–15.10.1051/ijmqe/2017015Search in Google Scholar

[6] Hsieh J., Computed Tomography: Principles, Design, Artifacts, and Recent Advances, Bellingham, WA: SPIE Press, 2009.Search in Google Scholar

[7] Müller P., Hiller J., Cantatore A., and De Chiffre L., A study on evaluation strategies in dimensional X-ray computed tomography by estimation of measurement uncertainties, Int. J. Metrol. Qual. Eng. 3, 2012, 107–115.10.1051/ijmqe/2012011Search in Google Scholar

[8] Francoa L., Tahocesb P.G., Martínez-Merab J.A., Visualization Software for CT: Fan/Cone Beam and Metrology Applications, Procedia Engineering, Vol. 63, 2013, 779–785.10.1016/j.proeng.2013.08.266Search in Google Scholar

[9] Heinzl Ch., Analysis and Visualization of Industrial CT Data, Altschwendt: PhD Thesis, 2008.Search in Google Scholar

[10] Trzciński D., Wysokorozdzielcza tomografia komputerowa, Evertiq Technologie 27.07.2012.Search in Google Scholar

[11] Świderska A., Zobaczyć niewidzialne – przemysłowa tomografia komputerowa, Magazyn Przemysłowy, Projektowanie i Konstrukcje 01.02.2016.Search in Google Scholar

[12] Kowaluk T., Ratajczyk E., Wzorce do badania dokładności przemysłowych tomografów komputerowych i przykłady ich zastosowania, MECHANIK, 4, 2015, 291–296.10.17814/mechanik.2015.4.156Search in Google Scholar

[13] Kruth J.P., Bartscher M., Carmignato S., Schmitt R., De Chiffre L., Weckenmann A., Computed tomography for dimensional metrology, CIRP Ann. Manuf. Technol. 60, 2011, 821–842.10.1016/j.cirp.2011.05.006Search in Google Scholar

[14] De Chiffre L., Carmignato S., Kruth J.P., Schmitt R., Wecken-mann A., Industrial applications of computed tomography, CIR-PAnn.Manuf.Technol.63, 2014, 655–677.10.1016/j.cirp.2014.05.011Search in Google Scholar

[15] Thompson A., Maskery I., Leach R.K., X-ray computed tomography for additive manufacturing: a review, Meas. Sci. Technol. 27, 072001, 2016.10.1088/0957-0233/27/7/072001Search in Google Scholar

[16] Gapiński B., Wieczorowski M., Marciniak-Podsada L., Dybała B., Ziółkowski G., Comparison of different method of measurement geometry using CMM, optical scanner and computed tomography 3D, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013.10.1016/j.proeng.2014.02.230Search in Google Scholar

[17] Wieczorowski M., Gapiński B., X-RAY CT IN METROLOGY OF GEOMETRIC FEATUR”, ACTA TEHNICA CORVINIENSIS – Bulletin of Engineering Tome VII Fascicule 1 [January–March], 2014, 95–100.Search in Google Scholar

[18] Herman G.T., Fundamentals of Computerized Tomography: Image Reconstruction from Projections, Springer, 2009.Search in Google Scholar

[19] https://jgarantmc.com/how-industrial-ct-scanning-works (access: 08.06.2018).Search in Google Scholar

[20] Gapinski B., Janicki P., Marciniak-Podsadna L., Jakubowicz M., Application of the computed tomography to control parts made on additive manufacturing process, Procedia Engineering 149, 2016, 105–121.10.1016/j.proeng.2016.06.645Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo