1. bookVolume 115 (2018): Issue 8 (August 2018)
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
access type Open Access

Experimental determination of the temperature in the cutting zone during turning of titanium alloy grade 2

Published Online: 21 May 2020
Volume & Issue: Volume 115 (2018) - Issue 8 (August 2018)
Page range: 189 - 197
Received: 03 Aug 2018
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
Abstract

The paper presents the laboratory measurements results of temperature distribution in the cutting zone during orthogonal turning of a GrDe 2 titanium tube. The cutting tool used during the tests was a bimetallic cut-off tool with an uncoated insert made of P10 sintered carbide. The test plan was developed using the miniTab16 computer application and the Taguchi method. The tests were performed in accordance with orthogonal table l9, which describes nine cutting trials for two independent factors, cutting speed vc [m/min] and feed rate f [mm/rev], at three different values. The temperature distribution in the cutting zone was measured by means of a flIr sC 620 thermal imaging camera. The archiving and processing of measurement results was performed with the ThermaCamresearcher Pro 2.9 computer application. The obtained results were used to determine the average temperature for each of the nine trials; then, a statistical analysis of the results was performed.

Keywords

[1] Chauvy P.F., Madore C., Landolt D., Variable length scale analysis of surface topography: characterization of titanium surfaces for biomedical applications, Surface and Coatings Technology, 1998, 110, 48–56.10.1016/S0257-8972(98)00608-2Search in Google Scholar

[2] Che-Haron C.H., Tool life and surface integrity in turning titanium alloy, Journal of Materials Processing Technology, 2001, 118, 231–237.10.1016/S0924-0136(01)00926-8Search in Google Scholar

[3] Grzesik W., A survey of current knowladge on machining titanium and its alloys, The 5th International Scientific Conference Development of Metal Cutting, 21–26.Search in Google Scholar

[4] Jaspers, S.P.F.C., Dautzenberg, J. H., Taminiau, D. A., Temperature Measurement in Orthogonal Metal Cutting, Int. J Advanced Manufacturing Technology, 14, 1998, 7–12.10.1007/BF01179411Search in Google Scholar

[5] Kolahani F., Manoochehri M., Hosseini A., 2011, Application of Taguchi Method and ANOVA Analysis for Simultaneous Optimization of Machining Parameters and Tool Geometry in Turning, World Academy of Science, Engineering and Technology, 74, 82–85.Search in Google Scholar

[6] Siwiec, J., Obróbka materiałów w stanie utwardzonym, Czasopismo Techniczne, 5-M/2011.Search in Google Scholar

[7] Struzikiewicz, G., Zębala, W., Rumian, K., Application of Taguchi method to optimization of cutting force and temperature during turning of difficult to cut materials, Key Engineering Materials 686, 2016, 114–118.10.4028/www.scientific.net/KEM.686.114Search in Google Scholar

[8] Ślusarczyk, Ł., The implementation of a thermal imaging camera for testing the temperature of the cutting zone in turning. Proceedings of 10031, 2016, 100310L1-100310L7.Search in Google Scholar

[9] Ślusarczyk, Ł., Franczyk, E., Development and verification of a measuring stand for recording the physical phenomena during turning, Photonics Applications in Astronomy Communications Industry and High-Energy Physics Experiments Book Series: Proceedings of SPIE 10445, 2017, 104456G.10.1117/12.2281041Search in Google Scholar

[10] Zębala, W., Gawlik, J., Matras, A., Struzikiewicz, G., Ślusarczyk, Ł., Research of surface finish during titanium alloy turning, Key Engineering Materials, 581, 2014, 409–414.10.4028/www.scientific.net/KEM.581.409Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo