<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents experimental and numerical results of the stamping process of an axially-symmetrical element. The subject of the study was a sample made of a 0.47 mm thick aluminium alloy Al-1100 sheet. Experimental studies were conducted on a universal testing machine, while numerical simulations were carried out on two different numerical software programs Abaqus<sup>®</sup> and Deform-3D. The results obtained from the numerical analysis allowed to develop a numerical model of the stamping process.</p></abstract>

The paper presents experimental and numerical results of the stamping process of an axially-symmetrical element. The subject of the study was a sample made of a 0.47 mm thick aluminium alloy Al-1100 sheet. Experimental studies were conducted on a universal testing machine, while numerical simulations were carried out on two different numerical software programs Abaqus® and Deform-3D. The results obtained from the numerical analysis allowed to develop a numerical model of the stamping process.

Comparative analysis of the experimental and numerical research of the stamping process of axially-symmetrical elements

Department of Computer Modelling and Metal Forming Technologies, Faculty of Mechanical Engineering

Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents experimental and numerical results of the stamping process of an axially-symmetrical element. The subject of the study was a sample made of...

Comparative analysis of the experimental and numerical research of the stamping process of axially-symmetrical elements

Published Online: May 29, 2020

Page range: 205 - 210

DOI: https://doi.org/10.4467/2353737XCT.17.202.7431

Keywords
stamping process, numerical and experimental analysis, Abaqus, Deform-3D

© 2017 Patryk Różyło et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Comparative analysis of the experimental and numerical research of the stamping process of axially-symmetrical elements

Published Online: May 29, 2020

Page range: 205 - 210

DOI: https://doi.org/10.4467/2353737XCT.17.202.7431

Keywordsstamping process, numerical and experimental analysis, Abaqus, Deform-3D

© 2017 Patryk Różyło et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
stamping process, numerical and experimental analysis, Abaqus, Deform-3D