1. bookVolume 114 (2017): Issue 10 (October 2017)
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
access type Open Access

Simulation studies on ring upsetting using the ABAQUS software

Published Online: 29 May 2020
Volume & Issue: Volume 114 (2017) - Issue 10 (October 2017)
Page range: 167 - 178
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
Abstract

In this paper, a simulation and an experimental analysis of upsetting a cold ring placed between two rigid plates were conducted. When designing a new process, it is preferable to carry out the simulation studies using FEM, which allow for the prediction of the course and proper selection of process conditions. Due to the complexity of phenomena that occur during plastic formation, it is essential to have a good description of contact phenomena and properties of material in the plastic state. The computer simulation was performed for a specific material – a thick plate of hot-rolled carbon steel with fixed initial dimensions of rings and different values of the coefficient of friction.

Keywords

[1] Behrens A., Schafstall H., 2D and 3D simulation of com plex multistage forging processes by use of adaptive friction coefficient, Journal of Materials Processing Technology, 80–81, 1998, 298–303.10.1016/S0924-0136(98)00187-3Search in Google Scholar

[2] Burgdorf M., Über die Ermittlung des Reibwertes für verfahren der Massivumformung durch den Ringstauchwersuch Ind., Anz. Steel Research, 89, 1967.Search in Google Scholar

[3] Dassault Systemes, Abaqus Documentation and User Manual, Version 6.12, 2012.Search in Google Scholar

[4] Essa K., Kacmarcik I., Hartley P., Plancak M., Vilotic D., Upsetting of bi-metallic ring billets, Journal of Materials Processing Technology, 212, 2012, 817–824.10.1016/j.jmatprotec.2011.11.005Search in Google Scholar

[5] Giezyńska M., Tarcie, zużycie i smarowanie w obróbce plastycznej metali, WNT, Warszawa 1992.Search in Google Scholar

[6] Herold K., Steigversuch an Flachproben-Ein neuses Verfahren zur Ermittlung des Reibungskoezienten bei Umformvorgangen, Fertigungstechnik und Betrieben, 2, 1968.Search in Google Scholar

[7] Hojny M., Głowacki M., Opaliński A., Woźniak D., Computer aided design of stamping process technology using the eta/Dynaform 5.8 system, Technical Transactions, vol. 4-M/2011, Cracow Uniwersity of Technology Press.Search in Google Scholar

[8] Khoei A., Biabanaki S.O.R., Vafa A.R., Yadegaran I., Keshavarz S.H., A new computational algorithm for contact friction modeling of large plastic deformation in powder compaction processes, International Journal of Solids and Structures, 46, 2009.10.1016/j.ijsolstr.2008.08.034Search in Google Scholar

[9] Kunogi M., A new method of cold extrusion, J. Sci. Res. Inst., 50, 1956, 215–246.Search in Google Scholar

[10] Lacki P., Simulation of friction in upsetting process, International Journal of Applied Mechanics and Engineering, 9, 2004, 247–253.Search in Google Scholar

[11] Lacki P., Zastosowanie wybranych modeli tarcia w numerycznej analizie procesów obróbki plastycznej, Konferencja nt. „Informatyka w technologii metali” 11–14 stycznia 2004, Wyd. Nauk. AKAPIT, Kraków 2004.Search in Google Scholar

[12] Luo J., Wang X., Guo M., Xia J., Precision research in sheet metal flanging and upset extruding, Materials Research Innovations, 15, 2011, 439–442.10.1179/143307511X12858957675552Search in Google Scholar

[13] Male A.T., Cockroft M.G., A method for the determination of the coefficient of friction of metals under conditions of bulk plastic deformation, Journal of the Institute of Metals, 93, 1964, 38–46.Search in Google Scholar

[14] Morawiecki M., Sadok L., Wosiek E., Przeróbka plastyczna. Podstawy teoretyczne, Wyd. Śląsk, Katowice 1986.Search in Google Scholar

[15] Pawelski O., Rasp W., Hoerster C., The ring compression test as simulation test for the investigation of friction in hot metal forming, Steel Research, 60, 1989.10.1002/srin.198901674Search in Google Scholar

[16] Sofuoglu H., Gedikli H., Determination of friction coefficient encountered in large deformation processes, Tribology International 35, 2002, 27–34; doi:http://dx.doi.org/10.1016/S0301-679X(01)00076-7.10.1016/S0301-679X(01)00076-7Search in Google Scholar

[17] Tajdari M., Javadi M., A new experimental procedure of evaluating the friction coefficient in elastic and plastic regions, Journal of Materials Processing Technology 177, 2006, 247–250.10.1016/j.jmatprotec.2006.04.033Search in Google Scholar

[18] Wang F., Lenard J.G., An experimental study of interfacial friction hot ring compression, Journal of Engineering Materials and Technology, 114, 1992, 13–18.10.1115/1.2904133Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo