1. bookVolume 114 (2017): Issue 7 (July 2017)
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
access type Open Access

Cutting Forces during Precise Turning of NiTi Shape Memory Alloy

Published Online: 26 May 2020
Volume & Issue: Volume 114 (2017) - Issue 7 (July 2017)
Page range: 137 - 146
Journal Details
License
Format
Journal
eISSN
2353-737X
First Published
20 May 2020
Publication timeframe
1 time per year
Languages
English
Abstract

The selected indicators of machinability of NiTi based shape memory alloys has been examined. The paper presents research of possibilities of shape memory alloy like low-temperature (austenitic) Ni53Ti47 (Nitinol) with a coated cemented carbide tool, cutting force components (Ff–the feed force, Fp–the passive force, Fc–the main cutting force). In the work, a special attention was paid on the main cutting force components at variable cutting speed (vc).

Keywords

[1] Biermann D., Kahleyss F., Krebs E., Upmeier T., A Study on Micro-Machining Technology for the Machining of NiTi: Five-Axis Micro-Milling and Micro Deep-Hole Drilling, JMEPEG, vol. 20, 2011, 745–751.10.1007/s11665-010-9796-9Search in Google Scholar

[2] Elahinia M. H., Hashemi M., Tabesh M., Bhaduri S. B., Manufacturing and processing of NiTi implants: A review, Prog. in Mater. Sci., Vol. 57, 2012, 911–946.10.1016/j.pmatsci.2011.11.001Search in Google Scholar

[3] Kaczmarek J., Podstawy skrawania metali, PWT., Warszawa 1956.Search in Google Scholar

[4] Guo Y., Klink A., Fu Ch., Snyder J., Machinability and surface integrity of Nitinol shape memory alloy, CIRP Annals – Manu. Tech., Vol. 62, 2013, 83–86.10.1016/j.cirp.2013.03.004Search in Google Scholar

[5] Kaynak Y., Robertson S. W., Karacac H.E., Jawahir I.S., Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions, J. Mater. Process. Tech., Vol. 215, 2015, 95–104.10.1016/j.jmatprotec.2014.07.015Search in Google Scholar

[6] Kaynak Y., Karaca H.E., Noebe R.D., Jawahir I.S., Tool wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool wear performance with dry and MQL machining, Wear, Vol. 306, 2013, 51–63.10.1016/j.wear.2013.05.011Search in Google Scholar

[7] Kłaput J., Studies of selected mechanical properties of nitinol – shape memory alloy, Archives of Foundry Engineering, Vol. 10, Issue 3, 2010, 155–158.Search in Google Scholar

[8] Lin H.C., Lin K.M., Chen Y.C., A study on the machining characteristics of TiNi shape memory alloys, J. Mater. Process. Tech., Vol. 105, 2000, 327-332.10.1016/S0924-0136(00)00656-7Search in Google Scholar

[9] Piquard R., Acunto A. D, Laheurte P., Dudzinski D., Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation, Prec. Eng., Vol. 38, 2014, 356–364.10.1016/j.precisioneng.2013.11.006Search in Google Scholar

[10] Weinert K., Petzoldt V., Kotter D., Turning and Drilling of NiTi Shape Memory Alloys, CIRP Annals – Manuf. Technol., Vol. 53, Issue 1, 2004, 65–68.10.1016/S0007-8506(07)60646-5Search in Google Scholar

[11] Weinert K., Petzoldt V., Machining of NiTi based shape memory alloys, Mater, Sci. and Eng., Vol. 378, 2004, 180–184.10.1016/j.msea.2003.10.344Search in Google Scholar

[12] Weinert K., Petzoldt V., Machining NiTi micro-parts by micro-milling, Mater, Sci. and Eng., Vol. 481–482, 2008, 672–675.10.1016/j.msea.2006.10.220Search in Google Scholar

[13] Wu S.K., Lin H.C., Chen C.C., A study on the machinability of a Ti 49,6 Ni 50,4 shape memory alloy, Mater. Letters 40, 1999, 27–3.10.1016/S0167-577X(99)00044-0Search in Google Scholar

[14] http://iscar.pl (access: 03.10.2016).Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo