Application of laser treatment technology for boiling heat transfer augmentation

Dharmendra, M., Suresh, S., Hafiz, M.A., Udaya Kumar, G. 2020. Investigation to improve the pool boiling heat transfer characteristics using laser-textured copper-grooved surfaces. Int. J. Photoenergy, 3846157. DOI: 10.1155/2020/3846157 Search in Google Scholar

Dudkiewicz, E., Szałański, P., 2019. A review of heat recovery possibility in flue gases discharge system of gas radiant heaters. Int. Conf. on Advances in Energy Systems and Environmental Engineering (ASEE19). E3S Web of Conferences, 116, 00017. DOI: 10.1051/e3sconf/201911600017 Search in Google Scholar

Eid, E.I., Al-Nagdy, A.A., Khalaf-Allah, R.A., 2022. Nucleate pool boiling heat transfer above laser machining heating surfaces with different micro-cavity geometric shape for water-aluminum oxide nanofluid. Experimental Heat Transfer, 35(5), 688–707. DOI: 10.1080/08916152.2021.1946207 Search in Google Scholar

Grabas, B., 2015. Vibration-assisted laser surface texturing of metals as a passive method for heat transfer enhancement. Experimental Thermal and Fluid Science, 68, 499–508. DOI: 10.1016/j.expthermflusci.2015.06.006 Search in Google Scholar

Kaniowski, R., Pastuszko, R., 2018. Comparison of heat transfer coefficients of open micro-channels and plain micro-fins. EPJ Web of Conferences, 180, 02041.DOI: 10.1051/epjconf/201818002041 Search in Google Scholar

Karthikeyan, A., Coulombe, S., Kietzig, A.M., 2018. Boiling heat transfer enhancement with stable nanofluids and laser textured copper surfaces. International Journal of Heat and Mass Transfer, 126, 287–296. DOI: 10.1016/j.ijheatmasstransfer.2018.05.118 Search in Google Scholar

Kozłowski, C.A., Ulewicz, M., Walkowiak, W., Girek, T., Jabłońska, J., 2002. The effect of tautomeric rearrangement on the separation of Zn(II) and Cd(II) in ion flotation process with 4-thiazolidinone derivatives. Minerals Engineering, 15(9), 677–682. DOI: 10.1016/S0892-6875(02)00166-8 Search in Google Scholar

Može, M., Zupančič, M., Hočevar, M., Golobič, I., Gregorčič, P., 2019. Surface chemistry and morphology transition induced by critical heat flux incipience on laser-textured copper surfaces. Applied Surface Science, 490, 220–230. DOI: 10.1016/j.apsusc.2019.06.068 Search in Google Scholar

Mukherjee, S., Ebrahim, S., Mishra, P.C., Ali, N., Chaudhuri, P. A., 2022. Review on Pool and Flow Boiling Enhancement Using Nanofluids: Nuclear Reactor Application. Processes, 10, 177. DOI: 10.3390/pr10010177 Search in Google Scholar

Mukherjee, S., Wciślik, S., Mishra, P.C., Chaudhuri, P., 2024. Nanofluids: Critical issues, economics and sustainability perspectives. Particuology, 87, 147–172. DOI: 10.1016/j.partic.2023.06.021 Search in Google Scholar

Nirgude, V.V., Sahu, S.K., 2018. Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces. Experimental Heat Transfer, 566–583. DOI: 10.1080/08916152.2018.1559262 Search in Google Scholar

Nirgude, V.V., Sahu, S.K., 2020. Heat transfer enhancement in nucleate pool boiling using laser processed surfaces: Effect of laser wavelength and power variation. Thermochimica Acta 694, 178788. DOI: 10.1016/j.tca.2020.178788 Search in Google Scholar

Nirgude, V.V., Sahu, S.K., 2020. Nucleate boiling heat transfer performance of different laser processed copper surfaces. International Journal of Green Energy, 17:1, 38–47. DOI: 10.1080/15435075.2019.1686000 Search in Google Scholar

Orman, Ł.J., Radek, N., Pietraszek, J., Szczepaniak, M., 2020. Analysis of Enhanced Pool Boiling Heat Transfer on Laser—Textured Surfaces. Energies 13, 2700. DOI: 10.3390/en13112700 Search in Google Scholar

Orzechowski, T., 2009. Boiling heat transfer on the fin with laser modified surface, International Symposium on Convective Heat and Mass Transfer in Sustainable Energy, Tunisia, 1–14 DOI: 10.1615/ICHMT.2009.CONV.1110 Search in Google Scholar

Pastuszko, R., Kaniowski, R., Dadas, N., Bedla-Pawlusek, M., 2021. Pool boiling enhancement and a method of bubble diameter determination on surfaces with deep minichannels. International Journal of Heat and Mass Transfer, 179, 121713 DOI: 10.1016/j.ijheatmasstransfer.2021.121713 Search in Google Scholar

Piasecka, M., Maciejewska, B., Michalski, D., Dadas, N., Piasecki, A., 2024. Investigations of Flow Boiling in Mini-Channels: Heat Transfer Calculations with Temperature Uncertainty Analyses. Energies, 17, 791 DOI: 10.3390/en17040791 Search in Google Scholar

Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. Neural Networks and Soft Computing, Advances in Soft Computing, 19, 250–255. DOI: 10.1007/978-3-7908-1902-1_35 Search in Google Scholar

Pietraszek, J., Gądek-Moszczak, A., 2013. The Smooth Bootstrap Approach to the Distribution of a Shape in the Ferritic Stainless Steel AISI 434L Powders. Solid State Phenomena, 197, 162–167. DOI: 10.4028/www.scientific.net/SSP.197.162 Search in Google Scholar

Pietraszek, J., Gądek-Moszczak, A., Toruński, T., 2014. Modeling Counting System for PCB Soldered in the Wave Soldering Technology. Advanced Materials Research, 874, 139–143. DOI: 10.4028/www.scientific.net/AMR.874.139 Search in Google Scholar

Radek, N., Pietraszek, J., Antoszewski, B., 2014. The average friction coefficient of laser textured surfaces of silicon carbide identified by RSM methodology. Advanced Materials Research, 874, 29–34. DOI: 10.4028/www.scientific.net/AMR.874.29 Search in Google Scholar

Radek, N., Pietraszek, J., Goroshko, A., 2018. The impact of laser welding parameters on the mechanical properties of the weld. AIP Conf. Proc. 2017, 020025. DOI: 10.1063/1.5056288 Search in Google Scholar

Radek, N., Tokar, D., Kalinowski, A., Pietraszek, J., 2021. Influence of laser texturing on tribological properties of DLC coatings. Production Engineering Archives, 27(2), 119–123. DOI: 10.30657/pea.2021.27.15 Search in Google Scholar

Serdyukov, V., Starinskiy, S., Malakhov, I., Safonov, A., Surtaev, A., 2021. Laser texturing of silicon surface to enhance nucleate pool boiling heat transfer. Applied Thermal Engineering, 194, 117102. DOI: 10.1016/j.applthermaleng.2021.117102 Search in Google Scholar

Sitar, A., Moze, M., Crivellari, M., Schille, J., Golobic, I., 2020. Nucleate pool boiling heat transfer on etched and laser structured silicon surfaces. International Journal of Heat and Mass Transfer, 147, 118956 DOI: 10.1016/j.ijheatmasstransfer.2019.118956 Search in Google Scholar

Smirnov, G.F., 1977. Približennaja teorija teploobmena pri kipenii na poverchnostjach pokrytych kapilljarno – poristymi strukturami. Teploenergetika, 9, 77–80. Search in Google Scholar

Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non-Steady-State Temperature-Fields with Supplementary Data. Zeitschrift für Angewandte Mathematik und Mechanik, 72(6), T537–T539. Search in Google Scholar

Szataniak, P., Nový, F., Ulewicz, R., 2014. HSLA Steels – Comparison of Cutting Techniques. METAL 2014: 23^rd Int. Conf. on Metallurgy and Materials, 778–783. Search in Google Scholar

Ulewicz, M., Walkowiak, W., Brandt, K., Porwolik-Czomperlik, I., 2003. Ion flotation of zinc(II) and cadmium(II) in the presence of side-armed diphosphaza-16-crown-6 ethers. Separation Science and Technology, 38(3), 633–645. DOI: 10.1081/SS-120016655 Search in Google Scholar

Ulewicz, R., Ulewicz, M., 2020. Problems in the Implementation of the Lean Concept in the Construction Industries. LNCE, 47, 495–500. DOI: 0.1007/978-3-030-27011-7_63 Search in Google Scholar

Vilhena, L.M., Sedlaček, M., Podgornik, B., Vižintin, J., Babnik, A., Možina, J., 2009. Surface texturing by pulsed Nd:YAG laser. Tribology International, 42, 1496–1504. DOI: 10.1016/j.triboint.2009.06.003 Search in Google Scholar

Wciślik S., Mukherjee S., 2022. Evaluation of three methods of static contact angle measurements for TiO2 nanofluid droplets during evaporation. Physics of Fluids, 34, 062006. DOI: 10.1063/5.0096644 Search in Google Scholar

Wojtkowiak J., Amanowicz Ł., Mróz T., 2019. A new type of cooling ceiling panel with corrugated surface – Experimental investigation. International Journal of Energy Research, 43(13), 7275–7286. DOI: 10.1002/er.4753 Search in Google Scholar

Wong, K.K., Leong, K.C., 2018. Saturated pool boiling enhancement using porous lattice structures produced by Selective Laser Melting. International Journal of Heat and Mass Transfer, 121, 46–63. DOI: 10.1016/j.ijheatmasstransfer.2017.12.148 Search in Google Scholar

Xin, M.-D., Chao, Y.-D., 1987. Analysis and experiment of boiling heat transfer on T-shaped finned surfaces. Chem. Eng, Comm. 50, 185–199. Search in Google Scholar

Zhang, C., Zhang, L., Xu, H., Li, P., Qian, B., 2019. Performance of pool boiling with 3D grid structure manufactured by selective laser melting technique. International Journal of Heat and Mass Transfer, 128, 570–580. DOI: 10.1016/j.ijheatmasstransfer.2018.09.021 Search in Google Scholar

Zhang J., Li, P., Qian, B., Li, B., Qiu, Z., Xuan, F., 2020. Selective laser melting of G-surface lattice: forming process and boiling heat transfer characteristics. Journal of Nanoparticle Research, 22, 178. DOI: 10.1007/s11051-020-04914-7 Search in Google Scholar

Zuhlke, C.A., Anderson, T.P., Alexander, D.R., 2013. Formation of multiscale surface structures on nickel via above surface growth and below surface growth mechanisms using femtosecond laser pulses. Optics Express, 21 (7), 8473. DOI: 10.1364/OE.21.008460 Search in Google Scholar

Zupančič, M., Gregorčič, P., Bucci, M., Wang, C., Aguiar, G.M., Bucci, M., 2022. The wall heat flux partitioning during the pool boiling of water on thin metallic foils. Applied Thermal Engineering, 200, 117638. DOI: 10.1016/j.applthermaleng.2021.117638 Search in Google Scholar

Zupančič, M., Steinbücher, M., Gregor, P., Golobič, I., 2015. Enhanced pool-boiling heat transfer on laser-made hydrophobic/superhydrophilic polydimethylsiloxane-silica patterned surfaces. Applied Thermal Engineering, 91, 288–297. DOI: 10.1016/j.applthermaleng.2015.08.026 Search in Google Scholar