1. bookVolume 15 (2017): Issue 15 (June 2017)
Journal Details
License
Format
Journal
First Published
30 Mar 2018
Publication timeframe
1 time per year
Languages
English
access type Open Access

Roughness of 1.0721 steel after corrosion tests in 20% NaCl

Published Online: 28 Jan 2020
Page range: 27 - 30
Received: 26 Apr 2017
Accepted: 15 May 2017
Journal Details
License
Format
Journal
First Published
30 Mar 2018
Publication timeframe
1 time per year
Languages
English

Non-alloy quality case-hardening steels are used for low-load components made on automatic machining centers (automatic lines). Because of the widespread use of these steel in open constructions, they are exposed to atmospheric corrosion. The study attempted to analyze the effect of 20% aqueous NaCl solution on the roughness of the steel as a result of corrosion. The steel roughness and corrosion wear were determined according to corrosion time.

Keywords

1. Al-Duheisat S.A., El-Amoush A.S. 2016. Effect of deformation conditions on the corrosion behavior of the low alloy structural steel girders. Materials and Design vol. 89, 342–347.Search in Google Scholar

2. Alizadeh M., Bordbar S. 2013. The influence of microstructure on the protectiveproperties of the corrosion product layer generated on the welded API X70 steel in chloride solution. Corrosion Science 70, 170–179.10.1016/j.corsci.2013.01.026Open DOISearch in Google Scholar

3. Bohni H. 2005. Corrosion in reinforced concrete structures. CCR Press England 247 p.Search in Google Scholar

4. Chandramouli R., Kandavel T.K., Shanmugha Sundaram D., Ashok Kumar T. 2007. Deformation, densification and corrosion studies on sintered P/M plain carbon steel preforms. Material Design 28, 2260-2264.Search in Google Scholar

5. Dosch H., Mittemeijer E., Rühle M., Van De Voorde M.H. 2001. Europen White Book of Fundamental Research. Material Sciences. Max-Planck-Institut für Metallforschung Stuttgart, Germany.Search in Google Scholar

6. Dudek A., Wrońska A., Adamczyk L. 2014. Surface remelting of 316 L+434 L sintered steel: microstructure and corrosion resistance. Journal Solid State Electrochemistry 18/11, 2973-2981.Search in Google Scholar

7. El-Etre A.Y., Abdallah M. 2000, Natural honey as corrosion inhibitor for metals and alloys. II. C-steel in high saline water. Corrosion Science 42(4), 731–738.10.1016/S0010-938X(99)00106-7Open DOISearch in Google Scholar

8. EN 10025-2:2004. Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steel.Search in Google Scholar

9. Kocańda D., Mierzyński J., Mroziński S., Torzewski J. 2014. Fatigue Behaviour of S235JR Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment. Key Engineering Materials 598, 105-112.Search in Google Scholar

10. Lipiński T. 2015. Corrosion Rate of the X2CrNiMoN22-5-3 Duplex Stainless Steel Annealed at 500 degrees C. Acta Physica Polonica A, 130(4), 993-995Search in Google Scholar

11. Lipiński T. 2016. Corrosion Resistance of 1.4362 Steel in Boiling 65% Nitric Acid. Manufacturing Technology 16(5), 1004-1009.Search in Google Scholar

12. Machuca L.L., Jeffrey R., Melchers R. E. 2016. Microorganisms associated with corrosion of structural steel in diverse atmospheres. International Biodeterioration & Biodegradation 114, 234-243.Search in Google Scholar

13. Naveen E., Ramnath B.V., Elanchezhian C., Mohamed Nazirudeen S.S. 2017. Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel. Journal of Alloys and Compounds 695, 3299-3309.Search in Google Scholar

14. PN EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).Search in Google Scholar

15. PN EN ISO 3651-1. Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferriticaustenitic (duplex) stainless steels.Search in Google Scholar

16. PN-EN 10027-1:2016-12 Designations systems for steeo – part 1 steel names.Search in Google Scholar

17. Pradityana A., Sulistijono S., Shahab A. 2013. Effectiveness of myrmecodia pendans extract as eco-friendly corrosion inhibitor for material API 5L grade B in 3,5% NaCl solution. Advanced Material Research 789, 484–491.Search in Google Scholar

18. Santana Rodriquez J. J., Gonzalez Gonzalez J. E. 2006. Identification and formation of green rust 2 as an atmospheric corrosion product of carbon steel in marine atmospheres. Materials and Corrosion 57(5), 411-417.Search in Google Scholar

19. Scendo M., Radek N., Trela J. 2013. Influence of laser treatment on the corrosive resistance of Wc-Cu coating produced by electrospark deposition. Int. J. Electrochem. Sc 8, 9264-9277.Search in Google Scholar

20. Selejdak J., Ulewicz R., Ingaldi M. 2014. The evaluation of the use of a device for producing metal elements applied in civil Engineering. In 23rd International Conference on Metallurgy and Materials. Ostrava: TANGER 1882-1888.Search in Google Scholar

21. Szabracki P., Lipiński T. 2013. Effect of aging on the microstructure and the intergranular corrosion resistance of X2CrNiMoN25-7-4 duplex stainless steel. Solid State Phenomena 203-204, 59-62.Search in Google Scholar

22. Szabracki P., Lipiński T. 2014. Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel. In: METAL 2014: 23rd International Conference on Metallurgy and Materials. Ostrava: TANGER 476-481.Search in Google Scholar

23. Thompson N. G., Yunovich M., Dunmire D. 2007. Cost of corrosion and corrosion maintenance strategies. Corrossion Reviews 25, 247-262.Search in Google Scholar

24. Uhlig H. H., Revie R.W. 1985. Corrosion and corrosion control. 3rd Edition, John Wiley and Sons.Search in Google Scholar

25. Ulewicz R. 2003. Quality control system in production of the castings from spheroid cast iron. Metalurgija 42(1), 61-63.Search in Google Scholar

26. Ulewicz R., Nový F., Selejdak J. 2014. Fatigue Strength of Ductile Iron in Ultra-High Cycle Regime, Advanced Materials Research 874, 43-48.Search in Google Scholar

27. Zatkalíková V., Markovičová L., Chalupová M. 2016. Corrosion resistance of Cr-Ni-Mo Stainless Steel in Chloride and Fluoride Containing Environment. Manufacturing Technology 16(5), 1193 – 1198.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo