<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml">Contribution deals with monitoring the impact of airflow velocity around the sample, the oven temperature during thermal decomposition and nature of the sample for the minimum mass flux rate needed to initiate flame combustion. We used the samples of lignocellulosic materials, particularly spruce wood, pure cellulose, flax, cellulose impregnated by 5%, 10%, 15% water solution of KHCO3 and by 5%, 10%, 15% water solution of (NH4)2HPO4.</abstract>

Contribution deals with monitoring the impact of airflow velocity around the sample, the oven temperature during thermal decomposition and nature of the sample for the minimum mass flux rate needed to initiate flame combustion. We used the samples of lignocellulosic materials, particularly spruce wood, pure cellulose, flax, cellulose impregnated by 5%, 10%, 15% water solution of KHCO3 and by 5%, 10%, 15% water solution of (NH4)2HPO4.

Critical Rate of Thermal Decomposition of Pure and Impregnated Lignocellulosic Materials

Institute of Safety and Environmental Engineering, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology Bratislava, Paulínska 16, 917-24 Trnava, Slovak Republic

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

Contribution deals with monitoring the impact of airflow velocity around the sample, the oven temperature during thermal decomposition and nature of the sample...

Critical Rate of Thermal Decomposition of Pure and Impregnated Lignocellulosic Materials

Published Online: Mar 03, 2011

Page range: 109 - 118

DOI: https://doi.org/10.2478/v10186-010-0014-2

Keywords
critical mass flux rate, air-flow, lignocellulosic materials

This content is open access.

Critical Rate of Thermal Decomposition of Pure and Impregnated Lignocellulosic Materials

Published Online: Mar 03, 2011

Page range: 109 - 118

DOI: https://doi.org/10.2478/v10186-010-0014-2

Keywordscritical mass flux rate, air-flow, lignocellulosic materials

This content is open access.

Keywords
critical mass flux rate, air-flow, lignocellulosic materials