1. bookVolume 14 (2018): Issue 1 (June 2018)
Journal Details
License
Format
Journal
eISSN
2585-8084
First Published
30 Sep 2018
Publication timeframe
2 times per year
Languages
English
Open Access

Influence of the Braking System that is Contrary to Legislation on Breaking Characteristics of Passenger Car

Published Online: 16 Nov 2018
Volume & Issue: Volume 14 (2018) - Issue 1 (June 2018)
Page range: 1 - 5
Journal Details
License
Format
Journal
eISSN
2585-8084
First Published
30 Sep 2018
Publication timeframe
2 times per year
Languages
English
Abstract

There are also the vehicles among the other vehicles in road traffic that have been modified without being authorised by their producer. These also include modifications such as structural modifications in the vehicle break system. Besides a brake system of road motor vehicles is one of the main factors influencing the active safety of vehicles. The design of the brake system, its technical condition and additional intervention in its construction may have a positive as well as negative impact on the braking distance length and the value of the mean braking deceleration achieved. The paper focuses on the influence of the brake disc diameter of the front axle on the achieved value of the mean braking deceleration and the braking distance length, while the braking system has been modified for several times without being approved by car manufacturer. The introductory part of the paper describes the braking distance sections and it also explains the term of mean braking deceleration. The following part of the paper deals with the measurement methodology, measuring equipment and the vehicle used during the measurements as well as procedures employed. The results obtained from the measurements are processed and presented in tables and also in graphs for greater clarity. The final part of the paper summarizes and evaluates the measured results. The importance of the paper lies in quantification of the influence of brake discs with different diameters on the vehicle active safety in the case of a particular vehicle.

Keywords

Caban, J. et al. 2016 The research on ageing of glycol - based brake fluids of vehicles in operation. In: Advacnec in Science and Technology - Research Journal. Vol: 10, pp: 9 - 16, DOI: 10.12913/22998624/65113.10.12913/22998624/65113Search in Google Scholar

Gigan, L. 2017 Improvement in the brake disc design for heavy vehicles by parametric evaluation. In: Proceedings of the institution of mechanical engineers part D - journal of automobile angineering. Vol: 231, pp: 1989 - 2004, DOI: 10.1177/0954407016688421.10.1177/0954407016688421Open DOISearch in Google Scholar

Guney, B., Mutlu, I., Gayretli, A. 2016 Investigation of braking performance of NiCrBSi coated brake discs by flame spraying. In: Journal of the Balkan Tribological Association, vol: 22, pp: 887 - 903.Search in Google Scholar

Haugland, O. 2013 Car stopping distance on a tabletop. In: Physics teacher, Vol: 51, pp: 268 - 268.Search in Google Scholar

Ondruš, J., Hockicko P. 2015 Braking deceleration measurement using the video analysis of motions by Sw tracker. In: Transport and Telecommunication, Vol: 16, pp: 127 - 137.Search in Google Scholar

Jammes, Y. et al. 2017 Emergency braking is affected by the use of cruise control. In: Traffic Injury Prevention, Vol: 18, pp: 636 - 641, DOI: 10.1080/15389588.2016.1274978.10.1080/15389588.2016.12749782811803328118033Open DOISearch in Google Scholar

Lagel, M. et al. 2016 Automotive brake pads made with a bioresin matrix. In: Industrial Crops and Products, Vol: 85, pp: 372 - 381, DOI: 10.1016/j.indcrop.2015.12.090.10.1016/j.indcrop.2015.12.090Open DOISearch in Google Scholar

Lazeet, D. et al. 2016 Analysis of truck braking system in terms of construction and operation. In: Acta technica napocensis series - aplied mathematics mechanics and engineering, Vol: 59, pp:209 - 218.Search in Google Scholar

Li, E. et al. 2013 Influences of initial braking velocity and passenger capacity on Mean Fully Developed Deceleration. In: Mechanical engineering an materials, Vol: 281, pp: 201. DOI: 10.4028/www.scientific.net/AMM.281.201.10.4028/www.scientific.net/AMM.281.201Open DOISearch in Google Scholar

Li, W. et al. 2013 Vehicle Braking Efficiency On-Line Monitoring and Evaluation with MFDD. In: Advances designs and researches for manufacturing, PTS 1-3, Vol: 605 - 607, pp_ 968, DOI: 10.4028/www.scientiAMR.605-607.968.10.4028/www.scientiAMR.605-607.968Open DOISearch in Google Scholar

Metz, L. 2016 Friction on Polished vs. Newly Re-Rocked Oiland- Chip Roadway Surfaces. In: SAE international journal of passenger cars - mechanical systems. Vol: 9, pp: 541 - 545, DOI: 10.4271/2016-01-1568.10.4271/2016-01-1568Open DOISearch in Google Scholar

Mikušová, M. 2017 Crash avoidance systems and collision safety devices for vehicle occupants. In: Dynamics of civil engineering and transport structures and wind engineering. Vol: 107, DOI: 10.1051/matecconf/201710700024.10.1051/matecconf/201710700024Open DOISearch in Google Scholar

Oyetubo, A., Afolabi, O., Ohida, M. 2018 Analysis of Road Traffic Safety in Minna Niger State, Nigeria. In: Logistics & Sustainable Transport, 9(1), pp. 23-38. DOI:10.2478/jlst-2018-0003.10.2478/jlst-2018-0003Open DOISearch in Google Scholar

Paraskevadakis, D. et al. 2016 The impact of transport infrastructure projects on sustainable development within a major logistics gateway in North West England. In: Logistics & Sustainable Transport, 7(1), pp. 28-40. DOI:10.1515/jlst-2016-0003.10.1515/jlst-2016-0003Open DOISearch in Google Scholar

Rievaj, V. et al. 2013 Tire inflation pressure influence on a vehicle stopping distances. In: International Journal of Traffic and Transportation Engineering. Vol: 2 pp: 9 - 13 Doi:10.5923/j.ijtte.20130202.01.10.5923/j.ijtte.20130202.01Open DOISearch in Google Scholar

Rievaj, V., Mokričková, Synák, F. 2017 Temperature of the brakes and the braking force In: Transport and communications : scientific journal.. - Vol. 5, no. 1, pp: 16 - 16, ISSN 1339-5130.Search in Google Scholar

Selig, M. et al. 2012 The influence of tyre contact patch and on the stopping distance of automotive vehicles. In: 25th International Congress on Condition Monitoring and Diagnostic Engineering (COMADEM), Vol: 364, DOI: 10.1088/1742-6596/364/1/012014.10.1088/1742-6596/364/1/012014Open DOISearch in Google Scholar

Timur, M., Kuscu, H., Toylan H. 2017 Design and manufacture of automated controlled test machine detecting braking characteristic of brake lining in vehicles. In: Proceedings of the institution of mechanical engineers part C - Journal of mechanical engineering science. Vol: 231, pp: 3318 - 3329, DOI: 10.1177/0954406216645128.10.1177/0954406216645128Open DOISearch in Google Scholar

Vrábel, J. et al. 2017 Influence of Emergency Braking on Changes of the Axle Load of Vehicles Transporting Solid Bulk Substrates. In: Transbaltica 2017: Transportation and technology, Vol: 187, pp: 89 - 99, DOI: 10.1016/j.proeng.2017.04.354.10.1016/j.proeng.2017.04.354Open DOISearch in Google Scholar

Zamzamzadeh, M. et al. 2016 Dynamic simulation of brake pedal force effect on heavy vehicle braking distance under wet road conditions. In: International Journal of Automotive and Mechanical Engineering, Vol: 13, pp: 3555 - 3563, DOI: 10.15282/ijame.13.3.2016.2.0292.10.15282/ijame.13.3.2016.2.0292Open DOISearch in Google Scholar

Zhang, L. et al. 2016 All-Wheel Braking Force Allocation During a Braking-in-Turn Maneuver for Vehicles With the Brake-by-Wire System Considering Braking Efficiency and Stability. In: IEFE Transactions on Vehicular Technology, Vol: 265, pp: 4752 - 4767, DOI: 10.1007/978-3-319-24577-5_17.10.1007/978-3-319-24577-5_17Open DOISearch in Google Scholar

Zhao, L. 2014 Vehicle Braking Stability Analysis in Turn Condition. In: Machines Design and manufacturing Engineering III, pp: 604 - 607, llos, A., Al-Hadithi, M., 1992. Driver behaviour during onset of amber at signalised junctions. Traffic Engineering and Control 33 (5), 312e317.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo