Open Access

Comparison of Composite Laminates Machining Methods and its Influence on Process Temperature and Edge Quality


[1] Hocheng H. (2012), Machining technology for composite materials, Woodhead Publishing Limited.10.1533/9780857095145 Search in Google Scholar

[2] Uusitalo K. (2013), Designing in Carbon Fiber Composites, Chelmers University of Technology, Master of Science Thesis in the Master Defree Programme Product Development, pp 99, Göteborg, Sweden. Search in Google Scholar

[3] Jaśkiewicz R. (2018), Implementation of automatic sample and composite element cutting technologies, Transactions of the Institute of Aviation, No. 2(251), pp. 30-39, Warsaw.10.2478/tar-2018-0013 Search in Google Scholar

[4] Leone C., Papa I., Tagliaferri F., Lopresto V.(2013), Investigation of CFRP laser milling using a 30W Q-switched Yb:YAG fiber laser: Effect of process parameters on removal mechanisms and HAZ formation, Elsevier, Composites: Part A 55.10.1016/j.compositesa.2013.08.004 Search in Google Scholar

[5] Abedin F. (2013), Review on Heat Affected Zone [parenleft.cap]HAZ[parenright.cap] in Laser Machining, Proceedings of the 6th Annual GRASP Symposium, Wichita State University. Search in Google Scholar

[6] Hashish M. (2013), Trimming of CFRP components, WJTA-IMCA Conference and Expo, September 9-11, Houston, Texas, pp 4, Search in Google Scholar

[7] Wiśniowski W. (2014), Joint activity and common platform of cooperation, Institute of Aviation, 978-83-63539-12-2, pp 163-171. Search in Google Scholar

[8] Karny M. (2017) The influence of the fastener hole preparation method on the fastener pull-through process in a carbon composite, Transactions of the Institute of Aviation, No. 1(246), pp. 45-53, Warsaw.10.2478/tar-2017-0005 Search in Google Scholar

Publication timeframe:
4 times per year
Journal Subjects:
Engineering, Introductions and Overviews, other, Geosciences, Materials Sciences, Physics