Use of Waste Tire Chips and PET Plastic Flakes in Backfill Behind Retaining Walls

[1] Sanjay KS. (2017). Fundamentals of Fibre-Reinforced Soil Engineering, Developments in Geotechnical Engineering. Series editors Braja M Das. Henderson. USA. Search in Google Scholar

[2] ASTM. D 6270. (2004). Standard Practice for Use of Scrap Tires in Civil Engineering Applications. ASTM: West Conshohocken. PA, USA. Search in Google Scholar

[3] Adhikari B & Maiti SD. (2000). Reclamation and recycling of waste rubber. Progress in Polymer Science, Vol.25, PP. 909-948 Search in Google Scholar

[4] Ahmed,I. (1993). Laboratory study on properties of rubber-soils. Report No. FHWA/IN/JHRP-93/4. West Lafayette, IN: Purdue University. Search in Google Scholar

[5] Reddy SB, Krishna AM, Krishna, & Reddy R. (2017). Sustainable Utilization of Scrap Tire Derived Geomaterials for Geotechnical Applications. Indian Geotechnical Journal 48(3), 1-16, DOI. 10.1007/s40098-017-0273 Search in Google Scholar

[6] Cecich V, Gonzales L, Hoisaeter A, Williams, J, & Reddy, K. (1996). Use of shredded tires as lightweight backfill material for retaining structures. Waste Management and Research. 14, 433-451. Search in Google Scholar

[7] Hataf N & Rahimi MM. (2005). Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds. Construction and Building Materials. 20 (10), 910-916. Search in Google Scholar

[8] Yoon S, Prezzi M, Siddiki NZ & Kim B. (2006). Construction of a test embankment using a sand– tire shred mixture as fill material. Waste Management 26, 1033–1044. Search in Google Scholar

[9] Reddy SB, & Krishna AM. (2015). Recycled tire chips mixed with sand as lightweight backfill material in retaining wall applications: An experimental investigation. International Journal of Geosynthetics and Ground Engineering. https://doi.org/10.1007/s40891-015-0036-0. Search in Google Scholar

[10] Consoli Smith J, Jones M Jr, Houghton L. (1999). Future of health insurance. N Engl J Med 965, 325–329 Search in Google Scholar

[11] Zaimoglu AS & Yetimoglu T. (2011). Strength Behavior of Fine Grained Soil Reinforced with Randomly Distributed Polypropylene Fibers. Geotechnical and Geological Engineering. 30(1), 197–203. Search in Google Scholar

[12] Li C. (2005). Mechanical response of fiber-reinforced soil. PhD Dissertation, The University of Texas at Austin, U.S.A. Search in Google Scholar

[13] Hejazi SM, Sheikhzadeh M, Abtahi SM & Zadhoush A. (2012). A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials. 30, 100–116. Search in Google Scholar

[14] Brinkgreve RBJ. (2003). Manuel de Référence de PLAXIS Version 8.6. [PLAXIS 8.6]. Delft University of Technology and PLAXIS BV. Pays-Bas. Search in Google Scholar

[15] Saribas I & Ok B. (2019). Seismic performance of recycled aggregate–filled cantilever reinforced concrete retaining walls. Advances in Mechanical Engineering. 11(4) 1–11 Search in Google Scholar

[16] Luwalaga JG. (2016). Analysing the Behaviour of Soil Reinforced with Polyethylene Terephthalate (PET) Plastic Waste. A Research Thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering (M Eng.), Faculty of Engineering at Stellenbosch University. Search in Google Scholar

[17] Djadouni H, Trouzine H, Correia AG & Miranda TFS. (2019). 2D numerical analysis of a cantilever retaining wall backfilled with sand–tire chips mixtures. European Journal of Environmental and Civil Engineering. DOI:10.1080/19648189.2019.1570870. Search in Google Scholar

[18] Vendruscolo MA NC, Fonini A & Rosa FD. (2009). Fiber reinforcement effects on sand considering a wide cementation range. Geotextiles and Geomembranes. 27(3), 196–203. Search in Google Scholar