<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The interval of time after pouring concrete is an important factor, which directly affects the timing and cost of construction. The case study that was investigated in this research, is a tunnel project located in Iran. Eighteen mix designs were prepared using properties such as different water-cement ratios and the use of two types of superplasticizer with different dosages. The optimal mix designs among the samples were separately specified.</p>
<p>Concrete mix designs with different curing ages were made to specify the minimum curing time in which the concrete could gain the required compressive strength. Moreover, the concrete’s compressive strength was measured for different ages in order to determine the minimum time interval. For a better insight, two mathematical equations were derived to estimate the minimum curing time and time interval. Finally, a statistical analysis was conducted in order to determine the proper time intervals. Moreover, the analysis specified the impact rate of the research parameters (i.e. the type and dosage of superplasticizer, curing time, and water-cement ratio) on the compressive strength</p>
</abstract>

The interval of time after pouring concrete is an important factor, which directly affects the timing and cost of construction. The case study that was investigated in this research, is a tunnel project located in Iran. Eighteen mix designs were prepared using properties such as different water-cement ratios and the use of two types of superplasticizer with different dosages. The optimal mix designs among the samples were separately specified.
Concrete mix designs with different curing ages were made to specify the minimum curing time in which the concrete could gain the required compressive strength. Moreover, the concrete’s compressive strength was measured for different ages in order to determine the minimum time interval. For a better insight, two mathematical equations were derived to estimate the minimum curing time and time interval. Finally, a statistical analysis was conducted in order to determine the proper time intervals. Moreover, the analysis specified the impact rate of the research parameters (i.e. the type and dosage of superplasticizer, curing time, and water-cement ratio) on the compressive strength

Construction Management by Controlling the Design and Curing Time of a Concrete Mix

Dept. of Civil Engineering, Qazvin Branch

Dept. of Civil and Environmental Engineering

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

The interval of time after pouring concrete is an important factor, which directly affects the timing and cost of construction. The case study that was...

Construction Management by Controlling the Design and Curing Time of a Concrete Mix

Published Online: Jul 03, 2024

Page range: 38 - 47

DOI: https://doi.org/10.2478/sjce-2024-0012

Keywords
Time interval, Mix design, Water-cement ratio, Superplasticizer, Compressive strength, Statistical analysis

© 2024 Hamid Reza Darvishvand et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Construction Management by Controlling the Design and Curing Time of a Concrete Mix

Published Online: Jul 03, 2024

Page range: 38 - 47

DOI: https://doi.org/10.2478/sjce-2024-0012

KeywordsTime interval, Mix design, Water-cement ratio, Superplasticizer, Compressive strength, Statistical analysis

© 2024 Hamid Reza Darvishvand et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Keywords
Time interval, Mix design, Water-cement ratio, Superplasticizer, Compressive strength, Statistical analysis