<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Based on the results obtained in the previous research, the values of meshing characteristics of profile shifted quasi-involute arc-tooth-trace gears is calculated. The influence of the values of profile shift coefficient and the angle of tooth trace on meshing characteristic distribution on the tooth flank surface along tooth trace is defined. The results can be used for design of profile shifted quasi-involute arc-tooth-trace gears, cut by Gleason-type cutters with different profile angle value.</p>
</abstract>

Based on the results obtained in the previous research, the values of meshing characteristics of profile shifted quasi-involute arc-tooth-trace gears is calculated. The influence of the values of profile shift coefficient and the angle of tooth trace on meshing characteristic distribution on the tooth flank surface along tooth trace is defined. The results can be used for design of profile shifted quasi-involute arc-tooth-trace gears, cut by Gleason-type cutters with different profile angle value.

Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results

Department of Strength of Welded Structures

Luhans’k Taras Shevchenko National University

Institute of Commerce, Serving Technology and Tourism, Department of Production Technology and Professional Education

Department of Promising Resource-Saving Technologies of Machining

Laboratory of Forensic Technology and Specialized Equipment

National Technical University “Kharkiv Polytechnic Institute”

Institute of Education and Science in Mechanical Engineering and Transport, Department of Theory and Computer-Aided Design of Mechanisms and Machines

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Based on the results obtained in the previous research, the values of meshing characteristics of profile shifted quasi-involute arc-tooth-trace gears is...

Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results

Published Online: Nov 23, 2023

Page range: 181 - 192

DOI: https://doi.org/10.2478/scjme-2023-0032

Keywords
arc-tooth-trace gears, profile shift coefficient, sliding velocity, rolling velocity of mating teeth surfaces, reduced curvature, specific sliding, angle between sliding velocity vector and contact line

© 2023 Pavlo Tkach et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results

Published Online: Nov 23, 2023

Page range: 181 - 192

DOI: https://doi.org/10.2478/scjme-2023-0032

Keywordsarc-tooth-trace gears, profile shift coefficient, sliding velocity, rolling velocity of mating teeth surfaces, reduced curvature, specific sliding, angle between sliding velocity vector and contact line

© 2023 Pavlo Tkach et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
arc-tooth-trace gears, profile shift coefficient, sliding velocity, rolling velocity of mating teeth surfaces, reduced curvature, specific sliding, angle between sliding velocity vector and contact line