This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Šmak, R., Votava, J., Polcar, A. “The cooling media influence on selected mechanical properties of steel”, Acta Technologica Agriculturae 23(4), pp.183 – 189, 2020. DOI: 10.2478/ata-2020-0029Search in Google Scholar
Cervantes-García, A., Solorio-Díaz, G., Vergara-Hernández, H. J., Hernández-Morales, B., “Fluid dynamics around flat-end cylindrical quench probes under isothermal and nonisothermal conditions”, Revista Mexicana de Ingeniería Química 17(2), pp. 707 – 721, 2018. DOI: 10.24275/10.24275/uam/izt/dcbi/revmexingquim/2018v17n2/CervantesSearch in Google Scholar
Boonluang, T. “The effect of shaft diameter on hardness distribution and case harden depth of aisi4130 alloy steel after quenching”, Key Engineering MaterialsTrans Tech Publications Ltd 792, pp. 23 – 29, 2018. DOI: 10.4028/www.scientific.net/KEM.792.23Search in Google Scholar
Liu, H., Zhang, H., Li, J. “Thickness dependence of toughness in ultra-heavy low-alloyed steel plate after quenching and tempering”, Metals 8(8), pp. 628, 2018. DOI: 10.3390/met8080628Search in Google Scholar
Kim, K. S. “Characteristic analysis of carburized quenching processes for bevel gear of automobile driving part”, Current Nanoscience 10(1), pp. 51 – 55, 2014.Search in Google Scholar
Simha, N. A., Sushanth, M. P., Sachin, V. B., Kumar, T. P., Krishna, V. “Estimation of hardness during heat treatment of steels”, Metal Science and Heat Treatment 61(7), pp. 448 – 454, 2019. DOI: 10.1007/s11041-019-00444-9Search in Google Scholar
Maisuradze, M. V., Kuklina, A. A. “Numerical and experimental investigation of the heat treated steel part microstructure and hardness”, Materials Science Forum, Trans Tech Publications Ltd 946, pp. 346 – 350, 2019. DOI: 10.4028/www.scientific.net/MSF.946.346Search in Google Scholar
Qamar, S. B. “Manufacturability evaluation: a CFD approach for Jominy hardenability test”, Materials and Manufacturing Processes 33(16), pp. 1881 – 1888, 2018. DOI: 10.1080/10426914.2018.1512129Search in Google Scholar
Smoljan, B., Iljkic, D., Hanza, S. S., Jokic, M., Stic, L. “Computer simulation of mechanical properties and distortions during the quenching of steel”, IOP Conference Series: Materials Science and Engineering, IOP Publishing 400 (4), pp. 042 – 053, 2018. DOI: 10.1088/1757-899X/400/4/042053Search in Google Scholar
Trush, V., Maruschak, P., Lavrys, S., Luk’yanenko, A. “Effect of Heat Treatment in Oxygen-Containing Medium on Fatigue Life of Zirconium Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 72(2), pp. 211 – 218, 2022. DOI: 10.2478/scjme-2022-0030Search in Google Scholar
Moltasov, A., Tkach, P., Ustynenko, O., Protasov, R. “Effect of load eccentricity on stress condition of butt welded joint with asymmetrical reinforcement”, Strojnícky časopis – Journal of Mechanical Engineering 72(1), pp. 99 – 108, 2022. DOI: 10.2478/scjme-2022-0010Search in Google Scholar
Haasen, P., “Physikalische Metallkunde”, Springer-Verlag, Berlin, 1974. DOI: 10.1007/978-3-642-96199-1_11Search in Google Scholar
Bain, E. C., Dunkirk, N. Y., “The Nature of martensite”, Trans. AIME 70, pp. 25 – 45, 1924.Search in Google Scholar
Liščić, B., Singer, S., Smoljan, B. “Prediction of quench-hardness within the whole volume of axially-symmetric workpieces of any shape”, Strojniški Vestnik/Journal of Mechanical Engineering 56(2), pp. 104 – 114, 2010.Search in Google Scholar
Lindgard, P.A. “Theory and modeling of the martensitic transformation”, J. Physique IV 1, C4, pp. 3 – 12, 1991.Search in Google Scholar
Delaey, L. “Diffusionless transformations, in phase transformations in materials”, herausgegeben von P. Haasen, Bd. 5 von Materials Science and Technology, VCH, Weinheim, pp. 339 – 404, 1991.Search in Google Scholar
Bejan, A., Kraus, A. D. “Heat transfer handbook”, John Wiley & Sons, Inc., Hoboken, New Jersey, pp. 508 – 564, 2003.Search in Google Scholar
Cakir, M., Ozsoy, A. “Investigation of the correlation between thermal properties and hardenability of Jominy bars quenched with air–water mixture for AISI 1050 steel”, Materials and Design 32, pp. 3099 – 3105, 2011. DOI: 10.1016/j.matdes.2010.12.035Search in Google Scholar