Influence of Die Length on Extrusion Pressure and Extrudate Surface Quality

[1] Haring, A., Vetchy, D., Janovska, L., Krejcova, K., Rabiskova, M. „Differences in characteristics of pellets prepared by different pelletization methods“, Drug Development and Industrial Pharmacy 34 (3), pp. 289-296, 2008. DOI: 10.1080/03639040701655960.Search in Google Scholar

[2] Peciar, P., Juriga, M., Guštafík, A., Kohútová, M., Jezsó, K. „Procesné strojníctvo – Príklady”, Bratislava: Spektrum STU, 2021. p. 127, ISBN 978-80-227-5081-3 (In Slovak).Search in Google Scholar

[3] Benow, J., Bridgwater, J. „Paste Flow and Extrusion, Advanced Manufacturing Series“, Clarendon Press, Oxford. 1993. ISBN 9780198563389.Search in Google Scholar

[4] Rahman, P., L. et al. „Ram Extrusion of Potato Starch Dough Through Multi-Holed Dies”, Food and Bioproducts Processing 80 (1), pp. 12-19. 2002. ISSN 0960-3085, DOI: 10.1205/096030802753479061Search in Google Scholar

[5] Engländer A. et al. „A Preliminary Evaluation of Single Screw Paste Extrusion”, Chemical Engineering Research and Design 78 (5), pp. 790-794, 2000. ISSN 0263-8762, DOI: 10.1205/026387600527815Search in Google Scholar

[6] Peck M.C, S. et al. „Roller Extrusion of a Ceramic Paste”, Industrial & Engineering Chemistry Research 44 (11), pp. 4099-4111. 2005. DOI: 10.1021/ie040270gSearch in Google Scholar

[7] Wilson, D. I., Rough, S. L. „Exploiting the curious characteristics of dense solid–liquid pastes“, Chemical Engineering Science 61 (13), pp. 4147-4154, 2006. ISSN 0009-2509. DOI: 10.1016/j.ces.2005.10.032Search in Google Scholar

[8] Fekete, R., Jaššo, I., Peciar, M., Molnár, A. „Influence of rotor on extrusion pressure“, Powder Technology 141 (3), pp. 210-218. 2004. ISSN 0032-5910. DOI: 10.1016/j.powtec.2004.02.009Search in Google Scholar

[9] Domanti, ATJ. „Surface fracture in paste extrusion“, Ph.D. thesis, University of Cambridge, Cambridge, UK, 1998.Search in Google Scholar

[10] Domanti, ATJ., Horrobin, J. D., Bridgwater, J. „An investigation of fracture criteria for predicting surface fracture in paste extrusion“, International Journal of Mechanical Sciences 44 (7), pp 1381-1410. 2002. ISSN 0020-7403. DOI: 10.1016/S0020-7403(02)00047-4Search in Google Scholar

[11] Jezsó, K., Peciar, P. „Influence of the selected sieving parameters on the sieving efficiency of material MCC Avicel PH102“, Strojnícky časopis - Journal of Mechanical Engineering 72 (1), pp. 77-88, 2022. ISSN 0039-2472. DOI: 10.2478/scjme-2022-0008Search in Google Scholar

[12] Macho, O., Čierny, M., Gabrišová, Ľ., Juriga, M., Ružinský, R., Peciar, P. “Dynamic Image Analysis to Determine Granule Size and Shape, for Selected High Shear Granulation Process Parameters”, Strojnícky časopis - Journal of Mechanical Engineering 69 (4), pp. 57-64, 2019. DOI: 10.2478/scjme-2019-0043Search in Google Scholar

[13] Peciar, P. et al. „Analysis of pharmaceutical excipient MCC Avicel PH102 using compaction equations”, Strojnícky časopis - Journal of Mechanical Engineering 66 (1), pp. 65-82, 2016. DOI: 10.1515/scjme-2016-0012Search in Google Scholar

[14] Peciar, P. et al. „Particle Size Distribution Analysis of Beech Chips Depending on the Measurement Method“, Chemical Engineering Transaction 92, pp. 43-48. 2022. ISSN 2283-9216. DOI: 10.3303/CET2292008Search in Google Scholar

[15] Uličná, M., Fekete, R., Likavčan, A., Peciar, M. „Liquid Migration in the Paste as the Result of Consolidation“, Strojnícky časopis - Journal of Mechanical Engineering 71 (1), pp. 131-138, 2021. ISSN 0039-2472. DOI: 10.2478/scjme-2021-0011Search in Google Scholar