<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The advanced development of additive technologies over the past years led to the fact that parts made by these technologies have been increasingly used in the most diverse engineering applications. One of the most famous and the most applied additive technology is 3D printing. In this paper the influence of the material type on the operational characteristics of spur gears manufactured by the 3D printing technology is analyzed, after the experimental testing performed on a back to back gear test rig, in the predefined laboratory conditions.</p></abstract>

The advanced development of additive technologies over the past years led to the fact that parts made by these technologies have been increasingly used in the most diverse engineering applications. One of the most famous and the most applied additive technology is 3D printing. In this paper the influence of the material type on the operational characteristics of spur gears manufactured by the 3D printing technology is analyzed, after the experimental testing performed on a back to back gear test rig, in the predefined laboratory conditions.

The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The advanced development of additive technologies over the past years led to the fact that parts made by these technologies have been increasingly used in the...

The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology

Published Online: Dec 06, 2018

Page range: 261 - 270

DOI: https://doi.org/10.2478/scjme-2018-0039

Keywords
3D printing technology, plastic spur gears, back to back gear test

© 2018 Aleksandar Dimić, et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology

Published Online: Dec 06, 2018

Page range: 261 - 270

DOI: https://doi.org/10.2478/scjme-2018-0039

Keywords3D printing technology, plastic spur gears, back to back gear test

© 2018 Aleksandar Dimić, et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Keywords
3D printing technology, plastic spur gears, back to back gear test