Cutting Environment Impact on the Aluminium Alloy Machining

[1] BURANSKÁ E., BURANSKÝ, I. 2018. Cutting Environment Impact on the Aluminium Alloy Machining (DFA). In: 29th DAAAM International Symposium, pp. 1158–1163.10.2507/29th.daaam.proceedings.166Search in Google Scholar

[2] GHASEMI, A. H., KHORASANI, A. M., GIBSON I. 2018. Investigation on the effect of a pre-center drill hole and tool material on thrust force, surface roughness, and cylindricity in the drilling of Al7075. Materials (Basel)., 11(1).10.3390/ma11010140579363829337858Search in Google Scholar

[3] Dańa, M., Zetek, M., Schorník,V. 2015. Effect of cutting edge geometry on cutting tool life when drilling inconel 718. In: Ann. DAAAM Proc. Int. DAAAM Symp., Vol. 2015–Janua, No. 2016, pp. 709–714, 2015.10.2507/26th.daaam.proceedings.098Search in Google Scholar

[4] BHOWMICK, S., ALPAS, A. T. 2008. Minimum quantity lubrication drilling of aluminium–silicon alloys in water using diamond-like carbon coated drills. Int. J. Mach. Tools Manuf., Vol. 48(12–13), pp. 1429–1443.10.1016/j.ijmachtools.2008.04.010Search in Google Scholar

[5] YU, D. G. 2017. Deep hole drill with positive taper and principle for elimination of drill deviation using cutting fluid. Int. J. Adv. Manuf. Technol., 89(9–12), pp. 3195–3206.10.1007/s00170-016-9269-xSearch in Google Scholar

[6] KONG,L., LI, Y., LV, Y., WANG, Q. 2013. Numerical investigation on dynamic characteristics of drilling shaft in deep hole drilling influenced by minimal quantity lubrication. Nonlinear Dyn., 74(4), pp. 943–955.10.1007/s11071-013-1014-5Search in Google Scholar

[7] RAPETI, P., PASAM, V. K., RAO GURRAM, K. M., REVURU, R. S. 2018. Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. J. Clean. Prod., 172, pp. 2862–2875.10.1016/j.jclepro.2017.11.127Search in Google Scholar

[8] KRÁLIK, M., BACHRATÝ, M., POKUSOVÁ, M., DURAKBASA, N. M. 2017. Measuring of friction factor of cutting environment. Ann. DAAAM Proc. Int. DAAAM Symp., pp. 118–123.10.2507/28th.daaam.proceedings.015Search in Google Scholar

[9] YG. Inox carbide drill long with coolant holes for Stainless Steel (5xD)-Metric [online]. YG-1: www.yg1usa.comSearch in Google Scholar

[10] KONCA, E., CHENG,Y. T., WEINER, A. M., DASCH, J. M., ERDEMIR, A., ALPAS, A. T. 2005. Transfer of 319 Al alloy to titanium diboride and titanium nitride based (TiAlN, TiCN, TiN) coatings: Effects of sliding speed, temperature and environment. Surf. Coatings Technol., 200(7), pp. 2260–2270.10.1016/j.surfcoat.2004.10.008Search in Google Scholar

[11] KLOCKE, F., EISENBLÄTTER, G. 1998. Dry cutting - State of research. VDI Berichte, 46(1399), pp. 159–188.Search in Google Scholar

[12] ZHUJANI, F., QEHAJA, N., ABDULLAHU, F., BRUQI, M. 2016. Mathematical Modelling of Surface Roughness for Evaluating the Effects of Cutting Parameters in Drilling Process. Ann. DAAAM Proc. Int. DAAAM Symp., pp. 0195–0202.10.2507/27th.daaam.proceedings.029Search in Google Scholar

[13] CHEN, H., CHANG, S., TANG, C. 2017. Application of the Taguchi Method for Optimizing the Process Parameters of Producing Lightweight Aggregates by Incorporating Tile Grinding Sludge with Reservoir Sediments. Materials (Basel)., 10(11), p. 16.10.3390/ma10111294570624129125576Search in Google Scholar

[14] GAAZ,T. S., SULONG, A. B. A., KADHUM, A. H., NASSIR, M. H. 2016. Optimizing Injection Molding Parameters of Different Halloysites Type-Reinforced Thermoplastic. Materials (Basel)., 9(11), p. 19.10.3390/ma9110947Search in Google Scholar

[15] BURANSKÁ, E., GERULOVÁ, K., BURANSKÝ, I. 2016. Influence of cutting environment on tool life. Res. Pap., 24(38), pp. 9–15.10.1515/rput-2016-0033Search in Google Scholar

[16] DOHNAL, L. 1999. Kapitola VII. ANALYSA ROZPTYLU – ANOVA. In: Št Satistical method for clinical epidemiology and laboratory, Spring, pp. 37–42.Search in Google Scholar

[17] RIMANČÍK, M. 2007. Statistic for practice. First Edition.Search in Google Scholar