[
1. L.M. Gourd, Principles of Welding Technology, The Welding Institute, London, 1995.
]Search in Google Scholar
[
2. R. Hetnarski, Ed., Encyclopedia of Thermal Stresses, Springer Link, 2014.10.1007/978-94-007-2739-7
]Search in Google Scholar
[
3. N. Okerblom, Schweissspannungen in Metallkonstruktionen, Halle: Veb Carl Marhold Verlag, 1956.
]Search in Google Scholar
[
4. G. Verhaeghe, Predictive Formulae for Weld Distortion: A Critical Review, Abington Publishing, 1999, ISBN 185573 444 3., 1999.
]Search in Google Scholar
[
5. C. G. Soares and T. A. Santos, Eds., Maritime Technology and Engineering, vol. 1, Lisbon: CRC Press, 2014.
]Search in Google Scholar
[
6. M. Watanabe and K. Satoh, “Effect of welding conditions on the shrinkage and distortion in welded structures”, Welding Journal, 1961.
]Search in Google Scholar
[
7. V. Murugan and V. Gunaraj, “Effects of Process Parameters on Angular Distortion of Gas Metal Arc Welded Structural Steel Plates”, Welding Journal, 2005.
]Search in Google Scholar
[
8. R. W. O’Brien, “Predicting weld distortion in the design of automotive components”, Durham University, Durham, 2007.
]Search in Google Scholar
[
9. K. Sun, Y. Shi, Y. Hu and B. Liao, “Microstructure Evolution and Mechanical Properties of Underwater Dry Welded Metal of High Strength Steel Q690E under Different Water Depths”, Polish Maritime Research, vol. 27, no. 4, 2020.10.2478/pomr-2020-0071
]Search in Google Scholar
[
10. H. Li, S. Liu, Q. Ma, P. Wang, D Liu and Q. Zhu, “Investigation of Process Stability and Weld Quality of Underwater Wet Flux-Cored Arc Welding of Low-Alloy High-Strength Steel with Oxy-Rutile Wire”, Polish Maritime Research, vol. 28, no. 3, 2021.10.2478/pomr-2021-0037
]Search in Google Scholar
[
11. J. Kozak and J. Kowalski, “Problems of determination of welding angular distortions of T-fillet joints in ship hull structures”, Polish Maritime Research, vol. 22, no. 2(86), pp. 79-85, 2015.10.1515/pomr-2015-0020
]Search in Google Scholar
[
12. J. Kozak and J. Kowalski, “The Influence of Manufacturing Oversizing on Postwelding Distortions of the Fillet Welded Joint”, Polish Maritime Research, vol. 22, no. 4(88), pp. 59-63, 2015.10.1515/pomr-2015-0072
]Search in Google Scholar
[
13. M. Maternowski, Application of numerical methods for prediction of weld deformations of thin plates butt welded as well as laboratory verification of the results, Diploma thesis, Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, (in Polish), 2021.
]Search in Google Scholar
[
14. J. Wang, H. Zhao, J. Zou, H. Zhou, Z. Wu and S. Du, “Welding distortion prediction with elastic FE analysis and mitigation practice in fabrication of cantilever beam component of jack-up drilling rig”, Ocean Engineering, 2017.10.1016/j.oceaneng.2016.11.059
]Search in Google Scholar
[
15. T. Gray, Ed., Control of welding distortion in thin-plate fabrication, Cambridge, Woodhead Publishing Limited, 2014.
]Search in Google Scholar
[
16. A. Capriccioli and P. Frosi, “Multipurpose ANSYS FE procedure for welding processes simulation”, Fusion Engineering and Design, no. 84, 2009.10.1016/j.fusengdes.2009.01.039
]Search in Google Scholar
[
17. S. Joshi, J. Hildebrand, A. S. Aloraier and T. Rabczuk, “Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate”, Computational Materials Science, no. 69, 2013.10.1016/j.commatsci.2012.11.029
]Search in Google Scholar
[
18. C. Heinze, C. Schwenk and M. Rethmeier, “Influences of mesh density and transformation behavior on the result quality of numerical calculation of welding induced distortion”, Simulation Modelling Practice and Theory, no. 19, 2011.10.1016/j.simpat.2011.05.001
]Search in Google Scholar
[
19. D. Deng, Y. Zhou, T. Bi and X. Liu, “Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on joints”, Materials and Design, no. 52, 2013.10.1016/j.matdes.2013.06.013
]Search in Google Scholar
[
20. A. A. Bhatti, Z. Barsoum, H. Murakawa and I. Barsoum, “Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion,” Materials and Design, no. 65, 2015.10.1016/j.matdes.2014.10.019
]Search in Google Scholar
[
21. D. Deng, “FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects”, Materials and Design, 2009.10.1016/j.matdes.2008.04.052
]Search in Google Scholar
[
22. Z. Barsoum, A. A. Bhatti and S. Balawi, “Accuracy of computational welding mechanics methods for estimation of angular distortion and residual stresses”, in 1st International Conference on Structural Integrity, Kalpakkam, 2014.
]Search in Google Scholar
[
23. J. Zhu, M. Khurshid and Z. Barsoum, “Accuracy of computational welding mechanics methods for estimation of angular distortion and residual stresses”, Welding in the World, no. 63, 2019.10.1007/s40194-019-00746-9
]Search in Google Scholar
[
24. S. C. Park, H. S. Bang and W. J. Seong, “Effects of Material Properties on Angular Distortion in Wire Arc Additive Manufacturing: Experimental and Computational Analyses”, Materials, 2020.
]Search in Google Scholar
[
25. K. Ferenc, Welding, Warszawa: Wydawnictwa Naukowo-Techniczne, 2007 (in Polish).
]Search in Google Scholar
[
26. J. A. Goldak and M. Akhlaghi, Computational Welding Mechanics, New York: Springer Science+Business Media, 2005.
]Search in Google Scholar
[
27. Y. Rong, G. Zhang and Y. Huang, “Study of Welding Distortion and Residual Stress Considering Nonlinear Yield Stress Curves and Multi-constraint Equations”, Journal of Materials Engineering and Performance, 2016.10.1007/s11665-016-2259-1
]Search in Google Scholar
[
28. H. Long, D. Gery, A. Carlier and P. Maropoulos, “Prediction of welding distortion in butt joint of thin plates,” Materials and Design, 2009.10.1016/j.matdes.2009.05.004
]Search in Google Scholar
[
29. P. Knoedel, S. Gkatzogiannis and T. Ummenhofer, “Practical aspects of welding residual stress simulation”, Journal of Constructional Steel Research, 2017.10.1016/j.jcsr.2017.01.010
]Search in Google Scholar
[
30. S. Silva, L. Vilarinho, A. Scotti, T. H. Ong and G. Guimaraes, “Heat flux determination in the gas tungsten-arc welding process by using a three-dimensional model in inverse heat conduction problem”, High Temperatures‒High Pressures, 2003/2004.
]Search in Google Scholar
[
31. C. Heinze, C. Schwenk and M. Rethmeier, “Effect of heat source configuration on the result quality of numerical calculation of welding-induced distortion”, Simulation Modelling Practice and Theory, 2012.10.1016/j.simpat.2011.09.004
]Search in Google Scholar
[
32. S. Vrtiel and M. Behulova, “Analysis of laser beam welding of the S650MC high strength steel using numerical simulation,” in IOP Conference Series: Materials Science and Engineering, 2019.10.1088/1757-899X/465/1/012010
]Search in Google Scholar
[
33. S. Akella, H. Vemanaboina and R. K. Buddu, “Heat Flux for Welding Processes: Model for Laser Weld”, Sreyas International Journal of Scientists and Technocrats, 2016.10.24951/sreyasijst.org/2016011002
]Search in Google Scholar
[
34. X. Zhan, G. Mi, Q. Zhang, Y. Wei and W. Ou, “The hourglass-like heat source model and its application for laser beam welding of 6 mm thickness 1060 steel”, International Journal of Advanced Manufacturing Technology, 2017.10.1007/s00170-016-8797-8
]Search in Google Scholar
[
35. M. Chiumenti, M. Cervera, A. Salmi, C. A. Saracibar, N. Dialami and K. Matsui, “Finite element modeling of multi-pass welding and shaped metal deposition processes”, Computer Methods in Applied Mechanics and Engineering, 2010.10.1016/j.cma.2010.02.018
]Search in Google Scholar
[
36. M. Peric, Z. Tonkovic, A. Rodic, I. Garasic, I. Boras and S. Svaic, “Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld”, Materials and Design, 2014.10.1016/j.matdes.2013.08.011
]Search in Google Scholar
[
37. Z. Barsoum and I. Barsoum, “Residual stress effects on fatigue life of welded structures using LEFM”, Engineering Failure Analysis, 2009.10.1016/j.engfailanal.2008.06.017
]Search in Google Scholar
[
38. K. Seles, M. Peric and Z. Tonkovic, “Numerical simulation of a welding process using a prescribed temperature approach”, Journal of Constructional Steel Research, 2018.10.1016/j.jcsr.2018.02.012
]Search in Google Scholar
[
39. M. Peric, D. Stamenkovic and V. Milkovic, “Comparison of Residual Stresses in Butt-Welded Plates Using Software Packages Abaqus and ANSYS”, Scientific Technical Review, vol. 60, 2010.
]Search in Google Scholar
[
40. J. Klassen, T. Nitschke-Pagel and K. Dilger, “Simplified residual stress and distortion calculations of multi-pass welds and their possible influence on result quality”, Welding in the World, 2019.10.1007/s40194-019-00748-7
]Search in Google Scholar
[
41. Y. Yang, F. Brust, Z. Cao, J. Kennedy, X. Chen, Z. Yang and N. Chen, “Lump-Pass Welding Simulation Technology Development for Shipbuilding Applications”, in 6th International Trends in Welding Research 2002, Pine Mountain, USA, 2003.10.1115/PVP2002-1105
]Search in Google Scholar
[
42. P. Dong, J. Hong and P. Bouchard, “Analysis of residual stresses at weld repairs”, International Journal of Pressure Vessels and Piping, 2005.10.1016/j.ijpvp.2004.08.004
]Search in Google Scholar
[
43. J. Guirao, E. Rodriguez, A. Bayon and L. Jones, “Use of a new methodology for prediction of weld distortion and residual stresses using FE simulation applied to ITER vacuum vessel manufacture”, Fusion Engineering and Design, 2009.10.1016/j.fusengdes.2009.04.009
]Search in Google Scholar
[
44. [44] Z. Barsoum, A. Bhatti and S. Balawi, “Computational Weld Mechanics – Towards a simplified and cost effective approach for large welded structures”, in 1st International Conference on Structural Integrity, Funchal, 2015.10.1016/j.proeng.2015.08.040
]Search in Google Scholar
[
45. H. Huang, N. Ma, T. Hashimoto and H. Murakawa, “Welding Deformation and Residual Stresses in Arc Welded Lap Joints by Modified Iterative Analysis”, Science and Technology of Welding & Joining, 2015.10.1179/1362171815Y.0000000040
]Search in Google Scholar
[
46. J. Wang, H. Yuan, N. Ma and H. Murakawa, “Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation”, Marine Structures, 2016.10.1016/j.marstruc.2016.02.004
]Search in Google Scholar
[
47. Y. Rong, J. Xu, Y. Huang and G. Zhang, “Review on finite element analysis of welding deformation and residual stress”, Science and Technology of Welding and Joining, 2018.10.1080/13621718.2017.1361673
]Search in Google Scholar
[
48. J. Wang, X. Shi, H. Zhou, Z. Yang and J. Liu, “Dimensional precision controlling on out-of-plane welding distortion of major structures in fabrication of ultra large container ship with 20000TEU”, Ocean Engineering, 2020.10.1016/j.oceaneng.2020.106993
]Search in Google Scholar
[
49. N. Ma, “An accelerated explicit method with GPU parallel computing for thermal stress and welding deformation of large structure models”, International Journal of Advanced Manufacturing Technology, 2016.
]Search in Google Scholar
