[1. The European Parliament and the Council of the European Union. (2010). Directive 2010/75/EU of the European Parilament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control). Official Journal of the European Union 17.12.2010.]Search in Google Scholar
[2. Samojeden, B. & Grzybek, T. (2016). The influence of the promotion of N-modified activated carbon with iron on NO removal by NH3-SCR (Selective catalytic reduction). Energy. 116, 1484–1491. DOI: 10.1016/j.energy.2016.04.059.10.1016/j.energy.2016.04.059]Search in Google Scholar
[3. Gao, F., Tang, X., Yi, H., Zhao, S., Li, C., Li, J., Shi Y. & Meng, X. (2017). A Review on Selective Catalytic Reduction of NOx by NH3 over Mn–Based Catalysts at Low Temperatures: Catalysts, Mechanisms, Kinetics and DFT Calculations. Catalysts, 7(7), 199. DOI: 10.3390/catal7070199.10.3390/catal7070199]Search in Google Scholar
[4. Samojeden, B. & Grzybek, T. (2017). The influence of nitrogen groups introduced onto activated carbons by high- or low-temperature NH3 treatment on SO2 sorption capacity. Adsorpt. Sci. Technol. 35(5–6), 572–581. DOI: 10.1177/0263617417702153.10.1177/0263617417702153]Search in Google Scholar
[5. Motak, M., Kuterasiński, Ł., Da Costa, P. & Samojeden, B. (2015). Catalytic activity of layered aluminosilicates for VOC oxidation in the presence of NOx. Comptes Rendus Chim. 18(10), 1106–1113. DOI: 10.1016/j.crci.2015.05.005.10.1016/j.crci.2015.05.005]Search in Google Scholar
[6. Carja, G. & Delahay, G. (2004). Mesoporous mixed oxides derived from pillared oxovanadates layered double hydroxides as new catalysts for the selective catalytic reduction of NO by NH3. Appl. Catal. B. Environ. 47(1), 59–66. DOI: 10.1016/j. apcatb.2003.07.004.]Search in Google Scholar
[7. Cheng, M., Jiang, B., Yao, S., Han, J., Zhao, S., Tang, X., Zhang, J. & Wang, T. (2018). Mechanism of NH3 Selective Catalytic Reduction Reaction for NOx Removal from Deiesel Engine Exhaust and Hydrothermal Stability of Cu-Mn/Zeolite Catalyst. J. Phys. Chem. 122(1), 455–464. DOI: 10.1021/acs. jpcc.7b09339.]Search in Google Scholar
[8. Koebel, M., Elsener, M. & Kleemann, M. (2000). Urea-SCR: a promising technique to reduce NOx emissions from automotive diesel engines. Catal. Today. 59(3–4), 335–345. DOI: 10.1016/S0920-5861(00)00299-6.10.1016/S0920-5861(00)00299-6]Search in Google Scholar
[9. Grzybek, T. (2007). Layered clays as SCR deNOx catalysts. Catal. Today. 119(1–4), 125–132. DOI: 10.1016/j. cattod.2006.08.006.]Search in Google Scholar
[10. Peng, Y., Li, J., Si, W., Luo, J., Wang, Y., Fu, J., Li, X., Crittenden, J. & Hao, J. (2015). Deactivation and regeneration of a commercial SCR catalyst: Comparison with alkali metals and arsenic. Appl. Catal. B Environ. 168–169, 195–202. DOI: 10.1016/j.apcatb.2014.12.005.10.1016/j.apcatb.2014.12.005]Search in Google Scholar
[11. Chang, H., Shi, C., Li, M., Zhang, T., Wang, C., Jiang, L., Wang, X. (2018). The effect of cations (NH4+, Na+, K+, and Ca2+) on chemical deactivation of commercial SCR catalyst by bromides. Chinese J. Catal. 39(4), 710–717. DOI: 10.1016/S1872-2067(18)63011-6.10.1016/S1872-2067(18)63011-6]Search in Google Scholar
[12. Basąg, S., Kocoł, K., Piwowarska, Z., Rutkowska,M., Baran, R. & Chmielarz, L. (2017). Activating effect of cerium in hydrotalcite derived Cu–Mg–Al catalysts for selective ammonia oxidation and the selective reduction of NO with ammonia. React. Kinet. Mech. Catal. 121(1), 225–240. DOI: 10.1007/s11144-017-1141-y.10.1007/s11144-017-1141-y]Search in Google Scholar
[13. Wu, X., Feng, Y., Du, Y., Liu, X., Zou, C. & Li, Z. (2019). Enhancing DeNOx performance of CoMnAl mixed metal oxides in low-temperature NH3-SCR by optimizing layered double hydroxides (LDHs) precursor template. Appl. Surf. Sci. 467–468, 802–810. DOI: 10.1016/j.apsusc.2018.10.191.10.1016/j.apsusc.2018.10.191]Search in Google Scholar
[14. Jabłońska, M., Nothdurft, K., Nocuń, M., Girman, V. & Palkovits, R. (2017). Redox-performance correlations in Ag–Cu–Mg–Al, Ce–Cu–Mg–Al, and Ga–Cu–Mg–Al hydro-talcite derived mixed metal oxides. Appl. Catal. B Environ. 207, 385–396. DOI: 10.1016/j.apcatb.2017.01.079.10.1016/j.apcatb.2017.01.079]Search in Google Scholar
[15. Chmielarz, L., Jabłońska, M., Strumiński, A., Piwowarska, Z., Węgrzyn, A., Witkowski, S. & Michalik, M. (2013). Selective catalytic oxidation of ammonia to nitrogen over Mg-Al, Cu-Mg-Al and Fe-Mg-Al mixed metal oxides doped with noble metals. Appl. Catal. B Environ. 130–131, 152–162. DOI: 10.1016/j.apcatb.2012.11.004.10.1016/j.apcatb.2012.11.004]Search in Google Scholar
[16. Xu, Z.P., Zhang, J., Adebajo, M.O., Zhang, H. & Zhou, C. (2011). Catalytic applications of layered double hydroxides and derivatives. Appl. Clay Sci. 53(2), 139–150. DOI: 10.1039/C4CS00160E.10.1039/C4CS00160E]Search in Google Scholar
[17. Forano, C., Costantino, U., Prévot, V. & Gueho, C.T. (2013). Layered Double Hydroxides (LDH). In F. Bergaya and G. Lagaly (Eds.), Handbook of clay science 745–782. Elsevier.10.1016/B978-0-08-098258-8.00025-0]Search in Google Scholar
[18. Rives, V. & Ulibarri, M.A. (1999). Layered double hydroxides (LDH) intercalated with metal coordination compounds and oxometalates. Coord. Chem. Rev. 181(1), 61–120. DOI: 10.1016/S0010-8545(98)00216-1.10.1016/S0010-8545(98)00216-1]Search in Google Scholar
[19. Meyn, M., Beneke, K. & Lagaly, G. (1990). Anion-exchange reactions of layered double hydroxides. Inorg. Chem. 29(26), 5201–5207. DOI: 10.1021/ic00351a013.10.1021/ic00351a013]Search in Google Scholar
[20. Jabłońska, M., Chmielarz, L. & Węgrzyn, A. Chemii, W. (2013). Selektywne katalityczne utlenianie (SCO) amoniaku do azotu i pary wodnej wobec mieszanych tlenków pochodzenia hydrotalkitowego – praca przeglądowa. Chemik. 8, 701–710. YADDA identificator: bwmeta1.element.baztech-6167861c-0171-499d-b857-8e5d837c4b2f.]Search in Google Scholar
[21. Prasanna, S.V., Kamath, P.V. & Shivakumara, C. (2007). Synthesis and characterization of layered double hydroxides (LDHs) with intercalated chromate ions. Mater. Res. Bull. 42(6), 1028–1039. DOI: 10.1016/j.materresbull.2006.09.021.10.1016/j.materresbull.2006.09.021]Search in Google Scholar
[22. Chmielarz, L., Ku, P., Majda, D. & Dziembaj, R. (2002). Catalytic activity of Co-Mg-Al, Cu-Mg-Al and Cu-Co-Mg-Al mixed oxides derived from hydrotalcites in SCR of NO with ammonia. Appl. Catal. B Environ. 35, 195–210. DOI: 10.1016/S0926-3373(01)00254-5.10.1016/S0926-3373(01)00254-5]Search in Google Scholar
[23. Miyata, S. (1983). Anion-Exchange Properties of Hydrotalcite-Like Compounds. Clays Clay Miner. 31(4), 305–311. DOI: 10.1346/CCMN.1983.0310409.10.1346/CCMN.1983.0310409]Search in Google Scholar
[24. Wang, Q., Wu, Z., Tay, H.H., Chen, L., Liu, Y., Chang, J., Zhong, Z., Luo, J. & Borgna, A. (2011). High temperature adsorption of CO2 on Mg-Al hydrotalcite: Effect of the charge compensating anions and the synthesis pH. Catal. Today. 164(1), 198–203. DOI: 10.1016/j.cattod.2010.10.042.10.1016/j.cattod.2010.10.042]Search in Google Scholar
[25. Li, K., Kumada, N., Yonesaki, Y., Takei, T., Kinomura, N., Wang, H. & Wang, C. (2010). The pH effects on the formation of Ni/Al nitrate form layered double hydroxides (LDHs) by chemical precipitation and hydrothermal method. Mater. Chem. Phys. 121(1–2), 223–229. DOI: 10.1016/j.matchemphys.2010.01.026.10.1016/j.matchemphys.2010.01.026]Search in Google Scholar
[26. Ghosal, P.S., Gupta, A.K. & Ayoob, S. (2015). Effect of formation pH, molar ratio and calcination temperature on the synthesis of an anionic clay based adsorbent targeting defluoridation. Appl. Clay Sci. 116–117, 120–128. DOI: 10.1016/j. clay.2015.08.026.]Search in Google Scholar
[27. Comelli, N.,A., Ruiz, M.,L., Aparicio, M.S.L., Merino, N.A., Cecilia, J.A., Rodrínguez-Castellón, E., Lick, I.D. & Ponzi, M.I. (2018). Influence of the synthetic conditions on the composition, morphology of CuMgAl hydrotalcites and their use as catalytic precursor in diesel soot combustion reactions. Appl. Clay Sci. 157, 148–157. DOI: 10.1016/j.clay.2018.02.039.10.1016/j.clay.2018.02.039]Search in Google Scholar
[28. Ramos-Ramírez, E., Ortega, N.L.G., Soto, C.A.C., Gutiérrez, M.T.O. (2009). Adsorption isotherm studies of chromium (VI) from aqueous solutions using sol-gel hydrotalcite-like compounds. J. Hazard. 172(2–3), 1527–1531. DOI: 10.1016/j. jhazmat.2009.08.023.]Search in Google Scholar
[29. Prinetto, F., Ghiotti, G., Graffin, P. & Tichit, D. (2000). Synthesis and characterization of sol-gel Mg/Al and Ni/Al layered double hydroxides and comparison with co-precipitated samples. Micropor. Mesopor. Mater. 39(1–2), 229–247. DOI: 10.1016/S1387-1811(00)00197-9.10.1016/S1387-1811(00)00197-9]Search in Google Scholar
[30. Jabłońska, M., Arán, M.A., Beale, A.M., Delahay, G., Petitto, C., Nocuń, M. & Palkovits, R. (2019). Understanding the origins of N2O decomposition activity in Mn(Fe)CoAlOx hydrotalcite derived mixed metal oxides. Appl. Catal. B Environ. 243, 66–75. DOI: 10.1016/j.apcatb.2018.10.010.10.1016/j.apcatb.2018.10.010]Search in Google Scholar
[31. Wang, Z., Li, Q., Wang, L. & Shangguan, W. (2012). Simultaneous catalytic removal of NOx and soot particulates over CuMgAl hydrotalcites derived mixed metal oxides. Appl. Clay Sci. 55, 125–130. DOI: 10.1016/j.clay.2011.11.003.10.1016/j.clay.2011.11.003]Search in Google Scholar
[32. Mascolo, G. & Mascolo, M.C. (2015). On the synthesis of layered double hydroxides (LDHs) by reconstruction method based on the “memory effect”. Micropor. Mesopor. Mater. 214, 34–36. DOI: 10.1016/j.micromeso.2015.03.024.10.1016/j.micromeso.2015.03.024]Search in Google Scholar
[33. Rivera, J.A., Fetter, G. & Bosch, P. (2006). Microwave power effect on hydrotalcite synthesis. Micropor. Mesopor. Mater. 89(1–3), 306–314. DOI: 10.1016/j.micromeso.2005.10.041.10.1016/j.micromeso.2005.10.041]Search in Google Scholar
[34. Zhi, P.X. & Guo, Q.L. (2005). Hydrothermal synthesis of layered double hydroxides (LDHs) from mixed MgO and Al2O3: LDH formation mechanism. Chem. Mater. 17(5), 1055–1062. DOI: 10.1021/cm048085g.10.1021/cm048085g]Search in Google Scholar
[35. Genty, E., Brunet, J., Poupin, C., Casale, S., Capelle, S., Massiani, P., Siffert, S. & Cousin, R. (2015). Co-Al Mixed Oxides Prepared via LDH Route Using Microwaves or Ultrasound: Application for Catalytic Toluene Total Oxidation. Catalysts. 5(2), 851–867. DOI: 10.3390/catal5020851.10.3390/catal5020851]Search in Google Scholar
[36. Vaccari, A. (1998). Preparation and catalytic properties of cationic and anionic clays. Catal. Today. 41(1–3), 53–71. DOI: 10.1016/S0920-5861(98)00038-8.10.1016/S0920-5861(98)00038-8]Search in Google Scholar
[37. Palmer, S.J., Soisonard, A. & Frost, R.L. (2009). Determination of the mechanism(s) for the inclusion of arsenate, vanadate, or molybdate anions into hydrotalcites with variable cationic ratio. J. Colloid Interface Sci. 329(2), 404–409. DOI: 10.1016/j.jcis.2008.09.065.10.1016/j.jcis.2008.09.06518945441]Search in Google Scholar
[38. Palomeque, J., Figueras, F. & Gelbard, G. (2006). Epoxidation with hydrotalcite-intercalated organotungstic complexes. Appl. Catal. A Gen. 300(2), 100–108. DOI: 10.1016/j. apcata.2005.10.037.]Search in Google Scholar
[39. Liu, K., Xu, Y., Yao, Z., Miras, H.N. & Song, Y.F. (2016). Polyoxometalate-Intercalated Layered Double Hydroxides as Efficient and Recyclable Bifunctional Catalysts for Cascade Reactions. ChemCatChem. 8(5), 929–937. DOI: 10.1002/cctc.201501365.10.1002/cctc.201501365]Search in Google Scholar
[40. Chen, F., Wu, X., Bu, R. & Yang, F. (2017). Co – Fe hydrotalcites for efficient removal of dye pollutants via synergistic adsorption and degradation. RSC Advances. 7, 41945–41954. DOI: 10.1039/C7RA07417D.10.1039/C7RA07417D]Search in Google Scholar
[41. Stępniowski, W.J., Norek, M., Michalska-Domańska, M., Bombalska, A., Nowak-Stępniowska, A., Kwaśny, M. & Bojar, Z. (2012). Fabrication of anodic aluminum oxide with incorporated chromate ions. Appl. Surf. Sci. 259, 324–330. DOI: 10.1016/j.apsusc.2012.07.043.10.1016/j.apsusc.2012.07.043]Search in Google Scholar
[42. Zhou, W., Tian, P., Sun, F., He, M. & Chen, Q. (2016). Highly efficient transformation of alcohol to carbonyl compounds under a hybrid bifunctional catalyst originated from metalloporphyrins and hydrotalcite. J. Catal. 335, 105–116. DOI: 10.1016/j.jcat.2015.11.017.10.1016/j.jcat.2015.11.017]Search in Google Scholar
[43. Conterosito, E., Palin, L., Antonioli, D. & Viterbo, D. (2015). Structural Characterisation of Complex Layered Double Hydroxides and TGA-GC-MS Study on Thermal Response and Carbonate Contamination in Nitrate- and Organic-Exchanged Hydrotalcites. Chem.; Eur. J. 21, 14975–14986. DOI: 10.1002/chem.201500450.10.1002/chem.201500450]Search in Google Scholar
[44. Ciocan, C.E., Dumitriu, E., Cacciaguerra, T., Fajula, F. & Hulea, V. (2012). New approach for synthesis of Mo-containing LDH based catalysts. Catal. Today. 198(1), 239–245. DOI: 10.1016/j.cattod.2012.04.071.10.1016/j.cattod.2012.04.071]Search in Google Scholar
[45. Dobrea, I.D., Ciocan, C.E., Dumitriu, E., Popa, M.I., Petit, E. & Hulea, V. (2015). Raman spectroscopy - Useful tool for studying the catalysts derived from Mo and V-oxyanionintercalated layered double hydroxides. Appl. Clay Sci. 104, 205–210. DOI: 10.1016/j.clay.2014.11.034.10.1016/j.clay.2014.11.034]Search in Google Scholar
[46. Montanari, B., Vaccari, A., Gazzano, M., Kässner, P., Papp, H., Pasel, J., Dziembaj, R., Makowski, W. & Lojewski, T. (1997). Characterization and activity of novel copper-containing catalysts for selective catalytic reduction of NO with NH3. Appl. Catal. B Environ. 13, 205–217. DOI: 10.1016/S0926-3373(96)00106-3.10.1016/S0926-3373(96)00106-3]Search in Google Scholar
[47. Twu, J. & Dutta, K. (1990). Decavanadate Ion-Pillared Hydrotalcite: Spectroscopic Studies of the Thermal Decomposition Process. J. Catal. 510, 503–510. DOI: 10.1016/0021-9517(90)90196-Q.10.1016/0021-9517(90)90196-Q]Search in Google Scholar
[48. Jabłońska, M. & Palkovits, R. (2015). Nitrogen oxide removal over hydrotalcite-derived mixed metal oxides. Catal. Sci. Technol. 6(1), 49–72. DOI: 10.1039/c5cy00646e.10.1039/C5CY00646E]Search in Google Scholar
[49. Carja, G., Dranca, S., Husanu, E. & Volf, I. (2009). Iron Containing Anionic Clays Supported With Iron Andcerium Oxides As Catalyst Precursors for NOx Reduction. Environ. Eng. Manag. J. 8(3), 553–557. DOI: 10.30638/eemj.2009.076.10.30638/eemj.2009.076]Search in Google Scholar
[50. Wu, X., Feng, Y., Du, Y., Liu, X., Zou, C. & Li, Z. (2019). Enhancing DeNOx performance of CoMnAl mixed metal oxides in low-temperature NH3-SCR by optimizing layered double hydroxides (LDHs) precursor template. Appl. Surf. Sci. 467–468, 802–810. DOI: 10.1016/j.apsusc.2018.10.191.10.1016/j.apsusc.2018.10.191]Search in Google Scholar