<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The research performed and presented in this paper, aims to verify the welding behavior of electrodes developed experimentally, as well as the possibility of their use in production. A group of two electrodes produced by Bohler Company, Gridur 24 and B.M.N were taken as reference, in order to compare them in terms of the mechanical properties of the deposited metal, with the experimentally developed electrodes EICr12Fe and EIMn13SiFe. They were made determinations of the chemical composition of the deposited metal with the two types of electrodes, measurements regarding the hardness of the metal deposited, comparative determinations of the structure of the weld deposit, and of the welding penetration, determinations of the deposition yield and verification of the welding behavior.</p></abstract>

The research performed and presented in this paper, aims to verify the welding behavior of electrodes developed experimentally, as well as the possibility of their use in production. A group of two electrodes produced by Bohler Company, Gridur 24 and B.M.N were taken as reference, in order to compare them in terms of the mechanical properties of the deposited metal, with the experimentally developed electrodes EICr12Fe and EIMn13SiFe. They were made determinations of the chemical composition of the deposited metal with the two types of electrodes, measurements regarding the hardness of the metal deposited, comparative determinations of the structure of the weld deposit, and of the welding penetration, determinations of the deposition yield and verification of the welding behavior.

Researches on the Welding Behaviour of Two Brands of High-Alloy and High-Efficiency Electrodes Used to Charge High Wear Parts

Ovidius University Annals of Constanta - Series Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The research performed and presented in this paper, aims to verify the welding behavior of electrodes developed experimentally, as well as the possibility of...

Researches on the Welding Behaviour of Two Brands of High-Alloy and High-Efficiency Electrodes Used to Charge High Wear Parts

Published Online: Dec 31, 2020

Page range: 71 - 78

DOI: https://doi.org/10.2478/ouacsce-2020-0008

Keywords
deposition yield, electrodes, experimental, welding

© 2020 Mariana Neli Novac et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Researches on the Welding Behaviour of Two Brands of High-Alloy and High-Efficiency Electrodes Used to Charge High Wear Parts

Published Online: Dec 31, 2020

Page range: 71 - 78

DOI: https://doi.org/10.2478/ouacsce-2020-0008

Keywordsdeposition yield, electrodes, experimental, welding

© 2020 Mariana Neli Novac et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
deposition yield, electrodes, experimental, welding