Environmental Assessment of Frost-resistant Concrete with Superabsorbent Polymers

1. Pigeon M & Pleau R: “Durability of Concrete in Cold Climates”. Spon, London, 1995.Search in Google Scholar

2. Powers T C & Brownyard T L: “Studies of Physical Properties of Hardened Portland Cement Paste”. American Concrete Institute -- Journal, Vol. 18, No. 2, 1947.Search in Google Scholar

3. Kuosa H, Ferreira R M, Holt E, Leivo M & Vesikari E: “Effect of Coupled Deterioration by Freeze-Thaw, Carbonation and Chlorides on Concrete Service Life”. Cement and Concrete Composites, Vol. 47, 2014, pp. 32-40.10.1016/j.cemconcomp.2013.10.008Search in Google Scholar

4. Powers T C: “Air Requirement of Frost-Resistant Concrete.” Portland Cement Association -- Research Laboratories -- Bulletin, No. 33, 1950, pp. 1-19.Search in Google Scholar

5. Kennedy H L: “The function of entrained air in concrete”. ACI Journal Proceedings, Vol. 39, 1943, pp. 529-544.10.14359/8641Search in Google Scholar

6. DSF/DS/EN 206 DK NA: 2019: “Concrete - Specification, Performance, Production and Conformity - Rules for Application of EN 206 in Denmark”. Denmark, 2019, pp. 46-48. (In Danish).Search in Google Scholar

7. Gebler S & Klieger P: “Effect of Fly-ash on the Air-void Stability of Concrete”. Journal of the American Concrete Institute, Vol. 80, No. 4, 1983, pp. 341-341.Search in Google Scholar

8. Macinnis C & Racic D: “The Effect of Superplasticizers on the Entrained Air-void System in Concrete”. Cement and Concrete Research, Vol. 16, No. 3, 1986, pp. 345-352.10.1016/0008-8846(86)90110-9Search in Google Scholar

9. Puthipad N, Ouchi M & Attachaiyawuth A: “Effects of Fly Ash, Mixing Procedure and Type of Air-Entraining Agent on Coalescence of Entrained Air Bubbles in Mortar of Self-Compacting Concrete at Fresh State”. Construction and Building Materials, Vol. 180, 2018, pp. 437-444.10.1016/j.conbuildmat.2018.04.138Search in Google Scholar

10. Popovics S: “Strength and Related Properties of Concrete: A Quantitative Approach”. John Wiley & Sons, Hoboken, NJ, USA, 1998.Search in Google Scholar

11. Habert G, Arribe D, Dehove T, Espinasse L & Le Roy R: “Reducing Environmental Impact by Increasing the Strength of Concrete: Quantification of the Improvement to Concrete Bridges”. Journal of Cleaner Production, Vol. 35, 2012, pp. 250-262.10.1016/j.jclepro.2012.05.028Search in Google Scholar

12. Randl N, Steiner T, Ofner S, Baumgartner E & Mészöly T: “Development of UHPC Mixtures from an Ecological Point of View”. Construction and Building Materials, Vol. 67, 2014, pp. 373-378.10.1016/j.conbuildmat.2013.12.102Search in Google Scholar

13. Jensen O M & Hansen P F: “Water-Entrained Cement-Based Materials - I. Principles and Theoretical Background”. Cement and Concrete Research, Vol. 31, No. 4, 2001, pp. 647-654.10.1016/S0008-8846(01)00463-XSearch in Google Scholar

14. Jensen O M & Hansen P F: “Water-Entrained Cement-Based Materials II. Experimental Observations”. Cement and Concrete Research, Vol. 32, No. 6, 2002, pp. 973-978.10.1016/S0008-8846(02)00737-8Search in Google Scholar

15. Laustsen S, Hasholt M T & Jensen O M: “A New Technology for Air-Entrainment of Concrete”. Proceedings, 1st International Conference on Microstructure Related Durability of Cementitious Composites, 2008, pp. 1223-1230.Search in Google Scholar

16. Reinhardt H W, Assmann A & Moening S: “Superabsorbent Polymers (SAPs) - An Admixture to Increase the Durability of Concrete”. Proceedings, 1st International Conference on Microstructure Related Durability of Cementitious Composites, 2008, pp. 313-322.Search in Google Scholar

17. Laustsen S, Hasholt M T & Jensen O M: “Void Structure of Concrete with Superabsorbent Polymers and Its Relation to Frost Resistance of Concrete”. Materials and Structures/Materiaux Et Constructions, Vol. 48, No. 1-2, 2015, pp. 357-368.10.1617/s11527-013-0188-0Search in Google Scholar

18. Lura P, Durand F, Loukili A, Kovler K & Jensen O M: “Strength of Cement Pastes and Mortars with Superabsorbent Polymers”. Proceedings, International RILEM Conference on Volume Changes of Hardening Concrete, 2006, pp. 117-726.10.1617/2351580052.013Search in Google Scholar

19. Zhu H, Wang Z, Xu J & Han Q: “Microporous Structures and Compressive Strength of High-Performance Rubber Concrete with Internal Curing Agent.” Construction and Building Materials, Vol. 215, 2019, pp. 128-134.10.1016/j.conbuildmat.2019.04.184Search in Google Scholar

20. Pillai R G, Gettu R, Santhanam M, Rengaraju S, Dhandapani Y, Rathnarajan S & Basavaraj A S: “Service Life and Life Cycle Assessment of Reinforced Concrete Systems with Limestone Calcined Clay Cement (LC3)”. Cement and Concrete Research, Vol. 118, 2019, pp. 111-119.10.1016/j.cemconres.2018.11.019Search in Google Scholar

21. Teh S H, Wiedmann T, Castel A & de Burgh J: “Hybrid Life Cycle Assessment of Greenhouse Gas Emissions from Cement, Concrete and Geopolymer Concrete in Australia”. Journal of Cleaner Production, Vol. 152, 2017, pp. 312-32010.1016/j.jclepro.2017.03.122Search in Google Scholar

22. Sabbagh R & Esmatloo P: “Life Cycle Assessment for Ordinary and Frost-Resistant Concrete”. Proceedings, IFIP International Conference on Advances in Production Management Systems, Vol. 567, 2019, pp. 159-167.10.1007/978-3-030-29996-5_19Search in Google Scholar

23. Turk J, Cotič Z, Mladenovič A & Šajna A: “Environmental Evaluation of Green Concretes versus Conventional Concrete by Means of LCA”. Waste Management, Vol. 45, 2015, pp. 194-205.10.1016/j.wasman.2015.06.03526143535Search in Google Scholar

24. Shengying Z, Jensen, O M & Hasholt M T: “Measuring Absorption of Superabsorbent Polymers in Cementitious Environments”. Materials and Structures, Vol. 53, No. 1, 2020, pp. 11.10.1617/s11527-020-1442-xSearch in Google Scholar

25. Bolomey J: “Granulation Et Prevision De La Resistance Probable Des Betons”. Travaux -- Edition of Science Et Industrie, Vol. 19, No. 30, 1935, pp. 228-232. (In French)Search in Google Scholar

26. Aalborg Portland A/S: “Cement og beton: Håndbogen om cement, beton og mørtel”. 2016, pp. 87-95. https://www.aalborgportland.dk/cement-og-beton-haandbog/. (In Danish).Search in Google Scholar

27. Popovics S: “New Formulas for the Prediction of the Effect of Porosity on Concrete Strength”. Journal of the American Concrete Institute, Vol. 82, No. 2, 136-146.Search in Google Scholar

28. DS/EN 1992-1-1 + AC: 2008: “Eurocode 2: Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings”, 2008.Search in Google Scholar

29. Hasholt M T, Jespersen M H S & Jensen O M: “Mechanical Properties of Concrete with SAP. Part I: Development of Compressive Strength”. Proceedings, International RILEM Conference on Use of Superabsorbent Polymers and Other New Additives in Concrete, 2010, pp. 117-126.Search in Google Scholar

30. DS/EN ISO 14040: 2008: “Environmental Management - Life Cycle Assessment - Principles and Framework”. 2008.Search in Google Scholar

31. Hauschild M Z, Rosenbaum R K & Olsen S I: “Life Cycle Assessment - Theory and Practice”. “Life Cycle Assessment - Theory and Practice”, Springer, 2018, pp. 1-1216.10.1007/978-3-319-56475-3Search in Google Scholar

32. Marinković S: “On the Selection of the Functional Unit in LCA of Structural Concrete”. International Journal of Life Cycle Assessment, Vol. 22, No. 10, 2017, pp. 1634-1636.10.1007/s11367-017-1379-7Search in Google Scholar

33. Dobbelaere G, de Brito J & Evangelista L: “Definition of an Equivalent Functional Unit for Structural Concrete Incorporating Recycled Aggregates.” Engineering Structures, Vol. 122, 2016, pp. 196-208.10.1016/j.engstruct.2016.04.055Search in Google Scholar

34. Damineli B L, Kemeid F M, Aguiar P S & John V M: “Measuring the Eco-Efficiency of Cement Use”. Cement and Concrete Composites, Vol. 32, No. 8, 2010, pp. 555-562.10.1016/j.cemconcomp.2010.07.009Search in Google Scholar

35. DS/EN 1990 DK NA: 2019: “National Annex to Eurocode 0: Basis of Structural Design”. 2019.Search in Google Scholar

36. DS/EN 1992-1-1 DK NA: 2017: “National Annex to Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings”. 2017.Search in Google Scholar

37. Mignon A, De Belie N, Dubruel P & Van Vlierberghe S: “Superabsorbent Polymers: A Review on the Characteristics and Applications of Synthetic, Polysaccharide-Based, Semi-Synthetic and ‘Smart’ Derivatives.” European Polymer Journal, Vol. 117, 2019, pp. 165-178.10.1016/j.eurpolymj.2019.04.054Search in Google Scholar

38. Joshi S J, & Abed R M M: “Biodegradation of Polyacrylamide and Its Derivatives.” Environmental Processes, Vol. 4, No. 2, 2017, pp. 463–476.10.1007/s40710-017-0224-0Search in Google Scholar

39. Celsa Steel Service A/S: “Steel reinforcement products for concrete”. 2016. https://www.epd-norge.no/getfile.php/135371-468351065/EPDer/ByggevarerSearch in Google Scholar

40. Gelardi G, Mantellato S, Marchon D, Palacios M, Eberhardt A B & Flatt R J: “9 - Chemistry of Chemical Admixtures”. “Science and Technology of Concrete Admixtures”, 2016, pp. 149-218.10.1016/B978-0-08-100693-1.00009-6Search in Google Scholar

41. Mignon A: “Effect of PH-responsive Superabsorbent Polymers on the Self-sealing and Self-healing of Cracks in Concrete”. (PhD Thesis), Ghent University, Ghent, Belgium, 2016.Search in Google Scholar

42. Van den Heede P, Mignon A, Habert G & De Belie N: “Cradle-to-Gate Life Cycle Assessment of Self-Healing Engineered Cementitious Composite with in-House Developed (Semi-)Synthetic Superabsorbent Polymers”. Cement and Concrete Composites, Vol. 94, 2018, pp. 166-180.10.1016/j.cemconcomp.2018.08.017Search in Google Scholar

43. Asano Y, Yasuda T, Tani Y & Yamada H: “A New Enzymatic Method of Acrylamide Production”. Agricultural and Biological Chemistry, Vol. 46, No. 5, 1982, pp. 1183-118910.1080/00021369.1982.10865240Search in Google Scholar

44. Guinee J B: “Handbook on Life Cycle Assessment, Handbook on Life Cycle Assessment”. “Handbook on Life Cycle Assessment”, Springer, the Netherlands, 2002.Search in Google Scholar

45. Celik K, Meral C, Petek Gursel A, Mehta P K, Horvath A, Monteiro P J M & Meral C: “Mechanical Properties, Durability, and Life-Cycle Assessment of Self-Consolidating Concrete Mixtures Made with Blended Portland Cements Containing Fly Ash and Limestone Powder”. Cement and Concrete Composites, Vol. 56, 2014, pp. 59-72.10.1016/j.cemconcomp.2014.11.003Search in Google Scholar

46. Marinkovic S, Radonjanin V, Malesev M & Ignjatovic I: “Comparative Environmental Assessment of Natural and Recycled Aggregate Concrete.” Waste Management, Vol. 30, No. 11, 2010, pp. 2255-2264.10.1016/j.wasman.2010.04.01220434898Search in Google Scholar

47. Tosic N, Marinkovic S, Dasic T & Stanic M: “Multicriteria Optimization of Natural and Recycled Aggregate Concrete for Structural Use”. Journal of Cleaner Production, Vol. 87, No. C, 2014, pp. 766-776.10.1016/j.jclepro.2014.10.070Search in Google Scholar

48. Habert, G & Roussel N: “Study of Two Concrete Mix-Design Strategies to Reach Carbon Mitigation Objectives”. Cement and Concrete Composites, Vol. 31, No. 6, 2009, pp. 397-402.10.1016/j.cemconcomp.2009.04.001Search in Google Scholar

49. Farzanian K, Pimenta Teixeira K, Perdigão Rocha I, De Sa Carneiro L & Ghahremaninezhad A: “The Mechanical Strength, Degree of Hydration, and Electrical Resistivity of Cement Pastes Modified with Superabsorbent Polymers”. Construction and Building Materials, Vol. 109, 2016, pp. 156-165.10.1016/j.conbuildmat.2015.12.082Search in Google Scholar

50. Laustsen S, Bentz D P, Hasholt M T & Jensen O M: “CT Measurements of SAP Voids in Concrete”. Proceedings, Use of Superabsorbent Polymers and Other New Additives in Concrete, 2010, pp. 153-162.Search in Google Scholar