1. bookVolume 19 (2019): Issue 3 (June 2019)
Journal Details
License
Format
Journal
eISSN
1335-8871
First Published
07 Mar 2008
Publication timeframe
6 times per year
Languages
English
access type Open Access

Electromagnetic Compatibility and Radiation Analysis in Control Room

Published Online: 26 Jun 2019
Volume & Issue: Volume 19 (2019) - Issue 3 (June 2019)
Page range: 126 - 131
Received: 09 Dec 2018
Accepted: 06 Jun 2019
Journal Details
License
Format
Journal
eISSN
1335-8871
First Published
07 Mar 2008
Publication timeframe
6 times per year
Languages
English
Abstract

The article presents a theoretical analysis of electromagnetic compatibility (EMC) and experimental measurement of effects of radiation and acoustic emission of high-voltage transformers for electronic equipment and working personnel in a control room. Electromagnetic compatibility and safety of equipment are not considered as two distinct areas of study in electric and electronic safety. Economic criteria cannot compromise safety but at the same time immunity levels must be relevant in order to establish a “Functional Safety”. Introducing Special Immunity Levels in the level of equipment testing allows us to combine the two areas of EMC and safety. The measurement was carried out in high-current of very high-voltage distribution station. A real-life analysis of effects of electric and electromagnetic field was carried out. FFT was used for mathematical processing of data which were later presented in a graphical form of a spectrally analyzed area. In the last part of the paper we discuss the suitability of acoustic camera to perform contactless monitoring of the health and operation conditions of the power transformer by analyzing acoustic field generated by the transformer core and windings in near control room.

Keywords

[1] Vaculíková, P., Vaculík, E. (2003). Electromagnetic Compatibility of Electric Equipments. Prague, Czech Republic: Grada Publishing. (in Czech)Search in Google Scholar

[2] Krug, F. (2002). EMV: Störemissionen systematisch untersuchen. Elektronik, 19, 88-93.Search in Google Scholar

[3] Nicolae, P.M., Nicolae, M.S., Smarandescu, I.D., Nicolae, I.D. (2017). Concerns on electromagnetic compatibility and power quality issues at a three-phase transformer. In IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI), Washington, USA. IEEE, 377-382.10.1109/ISEMC.2017.8077899Search in Google Scholar

[4] Kucera, M., Sebok, M., Korenciak, D., Zhukowski, P. (2013). Effect of asymmetry on reliability of a distribution transformer in star-delta configuration. In Conference on Diagnostics in Electrical Engineering (CDEE 2013), Pilsen, Czech Republic, 37-40.Search in Google Scholar

[5] Spanik, P., Sedo, J., Drgona, P., Frivaldsky, M. (2013). Real time harmonic analysis of recuperative current through utilization of digital measuring equipment. Elektronika ir Elektrotechnika, 19 (5), 33-38.10.5755/j01.eee.19.5.4364Search in Google Scholar

[6] Jacobs, I.S., Bean, C.P. (1963). Fine particles, thin films and exchange anisotropy. In Magnetism: Volume 3. New York: Academic Press, 271-350.Search in Google Scholar

[7] Kodali, W.P. (2001). Engineering Electromagnetic Compatibility: Principles, Measurements, Technologies, and Computer Models, Second Edition. Wiley-IEEE Press.Search in Google Scholar

[8] IEEE. (1987). IEEE standard procedures for measurements of power-frequency electric and magnetic fields from AC power lines. ANSI/IEEE Std 644-1987.Search in Google Scholar

[9] Yorozu, Y., Hirano, M., Oka, K., Tagawa, Y. (1987). Electron spectroscopy studies on magneto-optical media and plastic substrate interface. IEEE Translation Journal on Magnetics in Japan, 2, 740-741.10.1109/TJMJ.1987.4549593Search in Google Scholar

[10] Young, M. (1989. The Technical Writer’s Handbook. University Science Books.Search in Google Scholar

[11] Glowacz, A. (2018). Acoustic-based fault diagnosis of commutator motor. Electronics, 7 (11), 299.10.3390/electronics7110299Search in Google Scholar

[12] Glowacz, A. (2019). Fault diagnosis of single-phase induction motor based on acoustic signals. Mechanical Systems and Signal Processing, 117, 65-80.10.1016/j.ymssp.2018.07.044Search in Google Scholar

[13] Roj, J., Cichy, A. (2015). Method of measurement of capacitance and dielectric loss factor using artificial neural networks. Measurement Science Review, 15 (3), 127-131.10.1515/msr-2015-0019Search in Google Scholar

[14] Bartoletti, C., Desiderio, M., Di Carlo, D., Fazio, G., Muzi, F., Sacerdoti, G., Salvatori, F. (2004). Vibro- acoustic techniques to diagnose power transformers. IEEE Transactions on Power Delivery, 19 (1), 221-229.10.1109/TPWRD.2003.820177Search in Google Scholar

[15] Olszewska, A., Witos, F. (2016) Identification of acoustic emission signals originating from the core magnetization of power oil transformer. Archives of Acoustics, 41 (4), 799-812.10.1515/aoa-2016-0077Search in Google Scholar

[16] García, B., Burgos, J.C., Alonso, Á.M. (2006). Transformer tank vibration modeling as a method of detecting winding deformations-part I: Theoretical foundation, part II: Experimental verification. IEEE Transactions on Power Delivery, 21 (1), 157-169.10.1109/TPWRD.2005.852280Search in Google Scholar

[17] Zhao, M., Xu, G. (2017). Feature extraction of power transformer vibration signals based on empirical wavelet transform and multiscale entropy. IET Science, Measurement & Technology, 12 (1), 63-71.Search in Google Scholar

[18] Jin, M., Pan, J. (2016). Vibration transmission from internal structures to the tank of an oil-filled power transformer. Applied Acoustics, 113, 1-6.10.1016/j.apacoust.2016.05.022Search in Google Scholar

[19] Eric, M.M. (2011). Some research challenges of acoustic camera. In 19th Telecommunications Forum TELFOR 2011, Belgrade, Serbia. IEEE, 1036-1039.10.1109/TELFOR.2011.6143725Search in Google Scholar

[20] Norsonic AS. Acoustic camera Nor848A.https://web2.norsonic.com/product_single/324/Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo