1. bookVolume 28 (2020): Issue 4 (December 2020)
    Special Issue: IMTech2020-INNOVATIVE MINING TECHNOLOGIES. Editors: Dariusz Prostański, Bartosz Polnik
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
access type Open Access

Enhancing Efficiency by Implementation of Integrated Management System in Order to Align Organisational Culture and Daily Practice

Published Online: 17 Aug 2020
Volume & Issue: Volume 28 (2020) - Issue 4 (December 2020) - Special Issue: IMTech2020-INNOVATIVE MINING TECHNOLOGIES. Editors: Dariusz Prostański, Bartosz Polnik
Page range: 304 - 311
Received: 01 Apr 2020
Accepted: 01 Jul 2020
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
Abstract

The main aim of presented article is present methodology how sophisticated products as compressor equipment can be considered and analyzed as a complex technical system which consists of jointly operating components – a set of hardware, software, operational staff and documented information. In process modeling, these components can be in different processes of inputs, outputs, mechanisms (resources) or management. Based on the regulatory requirements for each component of the system, a key indicator efficiency can be identified. This will allow to control the process and make appropriate decisions to improve the system. The application of the proposed methodology for the development and implementation of an integrated management system reduce the cost of resources and significantly improve the quality of the implementation of processes.

Keywords

[1] M. Bengtsson, E. Alfredsson, M. Cohen, S. Lorek, P. Schroeder. “Transforming systems of consumption and production for achieving the sustainable development goals: moving beyond efficiency”. Sustainability Science, vol. 13, pp. 1533-1547, 2018. Search in Google Scholar

[2] A. Panda, K. Dyadyura, J. Valicek, M. Harnicarova, J. Zajac, V. Modrak, I. Pandova, P. Vrabel, E. Novakova-Marcincinova and Z. Pavelek. “Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene”. Materials, vol. 10, no. 4, pp. 337, 2017.10.3390/ma10040377550690828772733 Search in Google Scholar

[3] J. Valicek, M. Harnicarova, A. Panda, I. Hlavaty, M. Kusnerova, H. Tozan, M. Yagimli and V. Vaclavik. “Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface”. Machining, joining and modifications of advanced materials, vol. 61, pp. 111-120, 2016.10.1007/978-981-10-1082-8_12 Search in Google Scholar

[4] L.Y. Wang, H.H. Huang, R.W. West, D.Z. Wang. “Intelligent manufacturing system of impeller for computer numerical control (CNC) programming based on KBE”. J. Cent. South Univ., vol. 21, pp. 4577-4584, 2014. Search in Google Scholar

[5] M. Borsato. “Bridging the gap between product lifecycle management and sustainability in manufacturing through ontology building”. Computers in Industries, vol. 65, no. 2, pp. 258-269, 2014.10.1016/j.compind.2013.11.003 Search in Google Scholar

[6] E. Pallaro and N. Subramanian “Sustainable production and consumption in the automotive sector: Integrated review framework and research directions”. Sustainable Production and Consumption, vol. 4, pp. 47-61, 2015.10.1016/j.spc.2015.07.002 Search in Google Scholar

[7] J. Walls and R. Paquin. “Organizational perspectives of industrial symbiosis: a review and synthesis”. Org Environ., vol. 28, no. 1, pp. 32-53, 2015.10.1177/1086026615575333 Search in Google Scholar

[8] V. Moreau, M. Sahakian, P. van Griethuysen, F. Vuille. “Coming full circle: why social and institutional dimensions matter for the circular economy”. J Ind Ecol., vol. 21, no. 3, pp. 497-506, 2017.10.1111/jiec.12598 Search in Google Scholar

[9] K. Govindan and M. Hasanagic. “A systemic review on drivers, barriers, and practices towards circular economy: a supply chain perspective”. Int J Prod Res, vol. 56, no. 1-2, pp. 278-311, 2018.10.1080/00207543.2017.1402141 Search in Google Scholar

[10] A. Panda, J. Duplak, J. Jurko and M. Behun. “Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6”, Advanced Materials Research, vol. 340, pp. 30-33, 2011.10.4028/www.scientific.net/AMR.340.30 Search in Google Scholar

[11] K. Xing, H.-F. Wang, W. Qian. “A sustainability-oriented multi-dimensional value assessment model for product-service development”. International Journal of Production Research, vol. 51, no. 19, pp. 5908-5933, 2013. Search in Google Scholar

[12] O. Dynnyk, Y. Denysenko, V. Zaloga, O. Ivchenko and T. Yashyna. “Information support for the quality management system assessment of engineering enterprises”. DSMIE 2019: Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 65-74, 2019.10.1007/978-3-030-22365-6_7 Search in Google Scholar

[13] Y. Denysenko, O. Dynnyk, T. Yashyna, N. Malovana and V. Zaloga. Implementation of CALS-Technologies in quality management of product life cycle processes. DSMIE 2019: Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 3-12, 2019.10.1007/978-3-319-93587-4_1 Search in Google Scholar

[14] E. Sujová and H. Čierna. “Optimization and Improvement of Test Processes on a Production Line”. Management Systems in Production Engineering, vol. 26, no. 2, pp. 88-92, 2019.10.2478/mspe-2018-0014 Search in Google Scholar

[15] T.P. Sharashkina. “Methodical aspects of organization and carrying out of functional-cost analysis on the basis of process approach for the purpose of expenses and quality optimization”. European Research Studies, vol. XIX, issue 3, part B, pp. 77-96, 2016.10.35808/ersj/565 Search in Google Scholar

[16] M. Balara, D. Duplakova and D. Matiskova. “Application of a signal averaging device in robotics 2018”. Measurement, vol. 115, pp. 125-132, 2018.10.1016/j.measurement.2017.10.037 Search in Google Scholar

[17] A. Panda, Š. Olejárová, J. Valíček and M. Harničárová. “Monitoring of the condition of turning machine bearing housing through vibrations”. International Journal of Advanced Manufacturing Technology, vol. 97, no. 1-4, pp. 401-411, 2018.10.1007/s00170-018-1871-7 Search in Google Scholar

[18] H. Dong Wang, G. Le Chang, J. Ping Deng, J. Jie Zheng and Y. Lin Zhao. “Theoretical Research on New Method of Highway Engineering Quality Supervision and Management-Comprehensive Six Sigma Quality Management”. Applied Mechanics and Materials, vols. 584-586, pp. 2250-2263, 2014. Search in Google Scholar

[19] J. Valicek, M. Harnicarova, I. Kopal, Z. Palková, M. Kušnerová, A. Panda and V. Šepelák. “Identification of Upper and Lower Level Yield strength in Materials”. Materials, vol. 10, no. 9, pp. 1-20, 2017.10.3390/ma10090982561563728832526 Search in Google Scholar

[20] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. “Research of annealing process in laboratory conditions”. Measurement, vol. 73, 2015, pp. 607-618.10.1016/j.measurement.2015.06.008 Search in Google Scholar

[21] A. Panda, J. Dobránsky, M. Jančík, I. Pandová and M. Kačalová. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies”. Metalurgija, vol. 57, no. 4, pp. 353-356, 2018. Search in Google Scholar

[22] J. Valicek, M. Harnicarova, I. Hlavaty, R. Grznárik, M. Kusnerova, Z. Mitaľová and A. Panda. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials”. Materialwissenschaft und Werkstofftechnik, vol. 47, pp. 462-471, 2016.10.1002/mawe.201600522 Search in Google Scholar

[23] I. Pandova, T. Gondova and K. Dubayova. “Natural and Modified Clinoptilolite Testing for Reduction of Harmful Substance in Manufacturing Exploitation”. Advanced Materials Research, vols. 518-523, pp. 1757-1760, 2012. Search in Google Scholar

[24] J. Macala, I. Pandova, T. Gondova and K. Dubayova. “Reduction of polycyclic aromatic hydrocarbons and nitrogen monooxide in combustion engine exhaust gases by clinoptilolite”. Gospodarka Surowcami Mineralnymi, vol. 28, no. 2, pp. 113-123, 2012.10.2478/v10269-012-0015-1 Search in Google Scholar

[25] J. Macala, I. Pandova and A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases”. Mineral resources management, vol. 33, no. 1, pp. 125-138, 2017.10.1515/gospo-2017-0005 Search in Google Scholar

[26] Z. Murcinkova and T. Krenicky. “Applications utilizing the damping of composite microstructures for mechanisms of production machines and manipulator devices.” In: 13th Int. Multidisciplinary Sci. Geoconf. SGEM 2013, Albena, Bulgaria. June 16-22, 2013. Book Series: Int. Multidisciplinary Scientific GeoConference-SGEM, pp. 23-30, 2013. Search in Google Scholar

[27] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček and J. Kmec. “Development of the method for predicting the resource of mechanical systems”. International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019. Search in Google Scholar

[28] T. Krenicky. “Monitoring of Technical Systems Operation Using Virtual Instrumentation”. Strojarstvo extra, no. 5, pp. 25/1-25/2, 2010. ISSN 1335-2938. Search in Google Scholar

[29] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. “Measurements and evaluation of measurements of vibrations in steel milling process”. Measurement, vol. 106, pp. 18-25, 2017.10.1016/j.measurement.2017.04.023 Search in Google Scholar

[30] M. Rimar, M. Fedak, A. Kulikov and P. Smeringai. “Study of gaseous flows in closed area with forced ventilation.” MM Science Journal, vol. 2018, no. March, pp. 2188-2191, 2018. Search in Google Scholar

[31] J. Dobránsky, M. Pollák and Z. Doboš. “Assessment of production process capability in the serial production of components for the automotive industry”. Management Systems in Production Engineering, vol. 27, no. 4, pp. 255-258, 2019.10.1515/mspe-2019-0040 Search in Google Scholar

[32] M. Pollák, J. Torok, J. Zajac, M. Kočiško and M. Teliskova. “The structural design of 3D print head and execution of printing via the robotic arm ABB IRB 140”. ICIEA 2018, vol. 2018, pp. 194-198, 2018. Search in Google Scholar

[33] W. Bialy and J. Ružbarský. “Breakdown cause and effect analysis. Case study”. Management Systems in Production Engineering, vol. 26, pp. 83-87, 2018.10.1515/mspe-2018-0013 Search in Google Scholar

[34] D. Duplakova, L. Knapcikova, M. Hatala and E. Szilagyi. “Mathematical modelling of temperature characteristics of RFID tags with their subsequent application in engineering production”. TEM Journal-Technology Education Management Informatics, vol. 5, pp. 411-416, 2016. Search in Google Scholar

[35] J. Kascak, P. Baron, M. Teliskova, J. Zajac, J. Torok and J. Husar. “Implementation of augmented reality into the training and educational process in order to support spatial perception in technical documentation”. 6th IEEE international conference on industrial engineering and applications, pp. 583-587, 2019.10.1109/IEA.2019.8715120 Search in Google Scholar

[36] R. Bielousova. “Developing materials for English for specific purposes online course within the blended learning concept”. TEM Journal-Technology Education Management Informatics, vol. 6, pp. 637-642, 2017. Search in Google Scholar

[37] Ľ. Straka, I. Čorný and J. Piteľ. “Properties evaluation of thin micro hardened surface layer of tool steel after wire EDM”. Metals, vol. 6, no. 5, pp. 1-16, 2016.10.3390/met6050095 Search in Google Scholar

[38] K. Monkova and P. Monka. “Some aspects influencing production of porous structures with complex shapes of cells”. Lecture Notes in Mechanical Engineering, pp. 267-276, 2017.10.1007/978-3-319-56430-2_19 Search in Google Scholar

[39] Ľ. Straka, I. Čorný and J. Piteľ. “Prediction of the geometrical accuracy of the machined surface of the tool steel EN X30WCrV9-3 after electrical discharge machining with CuZn37 wire electrode”. Metals, vol. 7, no. 11, pp. 1-19, 2017.10.3390/met7110462 Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo