<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents the parametric analysis of a combined system of a low-volume concrete pavement, base layer and reinforced expansive soil, subjected to the stresses due to wheel loading and swelling of the soil. A soil-structure Interaction model is considered for the analysis, in which the pavement and the reinforcement are idealized as a finite beam, with plane-strain conditions, whereas a base layer and the expansive soil are modelled as Winkler Springs of different stiffnesses. During the analysis, it was taken into account that the geosynthetic reinforcement, which could be in the form of a geogrid, geocell, or a combination of both, possesses bending stiffness and is placed at the interface between the base layer and the expansive subgrade. The reinforcement layer is subjected to stresses due to wheel load, self-weight of pavement slab and surcharge load of the base layer at the top and the swelling pressure from the subgrade at its bottom. The governing differential equations for the flexural response of the model are derived and a closed-form solution is presented in a non-dimensional form. The outcomes of the parametric analysis highlight that the flexural response of the pavement is predominantly affected by the relative stiffness of the base layer and the expansive subgrade. In contrast, the relative flexural rigidity of the upper and lower beams has a comparatively minor impact on the model’s response. Additionally, parameters like the depth of placement of the lower beam, unit weight of the upper soil layer, and the self-weight of the upper beam also contribute to influencing the response of the pavement model. The study suggests that, while designing for the concrete pavement, opting for an increase in the modulus of subgrade of expansive soil may be a preferable choice over reinforcing the foundation of the pavement.</p>
</abstract>

This paper presents the parametric analysis of a combined system of a low-volume concrete pavement, base layer and reinforced expansive soil, subjected to the stresses due to wheel loading and swelling of the soil. A soil-structure Interaction model is considered for the analysis, in which the pavement and the reinforcement are idealized as a finite beam, with plane-strain conditions, whereas a base layer and the expansive soil are modelled as Winkler Springs of different stiffnesses. During the analysis, it was taken into account that the geosynthetic reinforcement, which could be in the form of a geogrid, geocell, or a combination of both, possesses bending stiffness and is placed at the interface between the base layer and the expansive subgrade. The reinforcement layer is subjected to stresses due to wheel load, self-weight of pavement slab and surcharge load of the base layer at the top and the swelling pressure from the subgrade at its bottom. The governing differential equations for the flexural response of the model are derived and a closed-form solution is presented in a non-dimensional form. The outcomes of the parametric analysis highlight that the flexural response of the pavement is predominantly affected by the relative stiffness of the base layer and the expansive subgrade. In contrast, the relative flexural rigidity of the upper and lower beams has a comparatively minor impact on the model’s response. Additionally, parameters like the depth of placement of the lower beam, unit weight of the upper soil layer, and the self-weight of the upper beam also contribute to influencing the response of the pavement model. The study suggests that, while designing for the concrete pavement, opting for an increase in the modulus of subgrade of expansive soil may be a preferable choice over reinforcing the foundation of the pavement.

Parametric Analysis for a Low-Volume Concrete Road with Reinforced Subgrade Subjected to Swelling Pressure

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper presents the parametric analysis of a combined system of a low-volume concrete pavement, base layer and reinforced expansive soil, subjected to the...

Parametric Analysis for a Low-Volume Concrete Road with Reinforced Subgrade Subjected to Swelling Pressure

Published Online: May 20, 2024

Page range: 55 - 64

Received: Oct 11, 2023

Accepted: Dec 28, 2023

DOI: https://doi.org/10.2478/jaes-2024-0007

Keywords
expansive soils, geosynthetics, pavement design, soil-structure interaction, swelling pressure, concrete pavement

© 2024 Ashwini Chavan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parametric Analysis for a Low-Volume Concrete Road with Reinforced Subgrade Subjected to Swelling Pressure

Published Online: May 20, 2024

Page range: 55 - 64

Received: Oct 11, 2023

Accepted: Dec 28, 2023

DOI: https://doi.org/10.2478/jaes-2024-0007

Keywordsexpansive soils, geosynthetics, pavement design, soil-structure interaction, swelling pressure, concrete pavement

© 2024 Ashwini Chavan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
expansive soils, geosynthetics, pavement design, soil-structure interaction, swelling pressure, concrete pavement