<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Under stresses close to the ultimate stresses, a reinforced concrete section yields and cracks. The calculation in linear elasticity no longer makes it possible to evaluate the real deformations of the section. One is then led to make a study in nonlinear elasticity. The object of this work is the elaboration of a calculation method in nonlinear elasticity, allowing the simulation until the failure of reinforced concrete sections subjected to a compound deviated bending taking into account the real behavior laws (nonlinear) of the materials (steel and concrete). A computer program is developed following FORTRAN standards, and then confronted with the obtained experimental results on failure tests of sections subjected to deflected bending. The comparison between the numerical simulation and the experimental test/calculation shows the achievement of satisfactory results.</p>
</abstract>

Under stresses close to the ultimate stresses, a reinforced concrete section yields and cracks. The calculation in linear elasticity no longer makes it possible to evaluate the real deformations of the section. One is then led to make a study in nonlinear elasticity. The object of this work is the elaboration of a calculation method in nonlinear elasticity, allowing the simulation until the failure of reinforced concrete sections subjected to a compound deviated bending taking into account the real behavior laws (nonlinear) of the materials (steel and concrete). A computer program is developed following FORTRAN standards, and then confronted with the obtained experimental results on failure tests of sections subjected to deflected bending. The comparison between the numerical simulation and the experimental test/calculation shows the achievement of satisfactory results.

Prediction of the Non-Linear Rupture of a Section Under Compound Deviated Bending

Department of Civil Engineering, Faculty of Construction Engineering

Laboratory of Modeling of Materials and Structures in Civil Engineering (L2MSGC), University ‘Mouloud Mammeri’ of Tizi Ouzou

Department of Civil Engineering, Faculty Of Construction Engineering

University ‘Mouloud Mammeri’ of Tizi Ouzou

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under stresses close to the ultimate stresses, a reinforced concrete section yields and cracks. The calculation in linear elasticity no longer makes it...

Prediction of the Non-Linear Rupture of a Section Under Compound Deviated Bending

Published Online: May 20, 2024

Page range: 11 - 16

Received: Oct 04, 2023

Accepted: Nov 10, 2023

DOI: https://doi.org/10.2478/jaes-2024-0002

Keywords
numerical simulation, reinforced concrete, cracking, failure, bearing capacity, mesh

© 2024 D. Atlaoui et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Prediction of the Non-Linear Rupture of a Section Under Compound Deviated Bending

Published Online: May 20, 2024

Page range: 11 - 16

Received: Oct 04, 2023

Accepted: Nov 10, 2023

DOI: https://doi.org/10.2478/jaes-2024-0002

Keywordsnumerical simulation, reinforced concrete, cracking, failure, bearing capacity, mesh

© 2024 D. Atlaoui et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
numerical simulation, reinforced concrete, cracking, failure, bearing capacity, mesh