[
Baturin O.V., Kolmakova D.A., Matveev V.N., Popov G.M., 2013. Designing a centrifugal compressor using IOSO optimization technology: Samara State Aerospace University named after academician S.P. Korolev, pp.66 (in Russian).
]Search in Google Scholar
[
Cherkasskiy V. M., 1984. Pumps, fans, compressors, 2nd ed.; Rev. and add., Energoatomizdat: Moscow, USSR; pp.416 (in Russian).
]Search in Google Scholar
[
Emre, S., Cadirci, S., 2022. Investigation of Suction Flow Control on Centrifugal Compressor with Vaned Diffuser. Energies, 15(2), 583, pp. 1-12.10.3390/en15020583
]Search in Google Scholar
[
Galerkin, Yu.B., Rekstin, A.F., Drozdov, A.A., Soldatova, K.V., Solovieva, O.A., Popova, E.Yu, 2020. Design of centrifugal compressors based on the universal modeling method. Int. J. Scientific and technical collection NEWS OF GAS SCIENCE, 2(44), pp. 92–110 (in Russian).
]Search in Google Scholar
[
Ghoreyshi, S.M., 2018. Development of an Ultra-high Efficiency Gas Turbine Engine (Uhegt) with Stator Internal Combustion: Design, Off-design, and Nonlinear Dynamic Operation. A dissertation in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Mechanical Engineering, the Office of Graduate and Professional Studies of Texas A&M University.10.1115/GT2019-90583
]Search in Google Scholar
[
Jiang S.P.K., 2018. Design of a high-performance centrifugal compressor with new surge margin improvement technique for high velocity turbomachinery, Propulsion and Power Research, 7(1), pp. 19-29.10.1016/j.jppr.2018.02.004
]Search in Google Scholar
[
Kalinkevych M., Ihnatenko V, Bolotnikova O, Obukhov O., 2018. Design of high efficiency centrifugal compressors stages. Refrigeration Equipment and Technology, 54(5), pp. 4‒9.10.15673/ret.v54i5.1239
]Search in Google Scholar
[
Kalwar, F. A., Kurdziel, K., Pytel, S., Gumula, M., Lobur, Melnyk M. M., 2020. The use of information systems for regulation of gas engine operating parameters [CAD in machinery design: implementation and educational issues (CADMD 2020)] 26th -27th November, Lviv, Ukraine. pp. 1-9.10.1088/1757-899X/1016/1/012020
]Search in Google Scholar
[
Kim, J.-H., Choi, J.-H. and Kim, K.-Y. 2010. Surrogate modeling for optimization of a centrifugal compressor impeller’, International Journal of Fluid Machinery and Systems, 3 (1), pp. 29‒38.10.5293/IJFMS.2010.3.1.029
]Search in Google Scholar
[
Kondratenko Y.P., Kozlov O.V., 2012. “Mathematic Modeling of Reactor’s Temperature Mode of Multiloop Pyrolysis Plant”, Modeling and Simulation in Engineering, Economics and Management, Lecture Notes in Business Information Processing, Vol. 115, pp. 178-187.10.1007/978-3-642-30433-0_18
]Search in Google Scholar
[
Kondratenko, Y.P., Topalov, A.M., Kozlov, O.V., 2019. Simulation of the Initial Stability of the Floating Dock for the List and Trim Stabilization Tasks. PROBLEMELE ENERGETICII REGIONALE, 1-2 (41), pp. 12-24 (in Russian).
]Search in Google Scholar
[
Lyashkov V. I., 2005. Theoretical foundations of heat engineering, Publishing house mechanical-1: Moscow, RF, pp. 260 (in Russian).
]Search in Google Scholar
[
Mangani L., Casartelli E., Mauri S., 2012. Assessment of Various Turbulence Models in a High Pressure Ratio Centrifugal Compressor with an Object Oriented CFD Code. J. Turbomach, 134, pp. 11.10.1115/1.4006310
]Search in Google Scholar
[
Medic, G., Sharma, Om P., Jongwook, J., Hardin, L. W., McCormick D.C., Cousins, W. T., Lurie, E. A., Shabbir A., Holley B. M., and Van Slooten, P. R., 2014 High Efficiency Centrifugal Compressor for Rotorcraft Applications. United Technologies Research Center, East Hartford, Connecticut; pp. 316.
]Search in Google Scholar
[
Mojaddam, M. and Pullen, K.R. 2019. Optimization of a centrifugal compressor using the design of experiment technique’, Applied Sciences, 9, 291, pp. 1‒20.10.3390/app9020291
]Search in Google Scholar
[
Seleznyov K.P., Podobuev Yu.S, Anisimov S.A., 1968. Theory and calculation of turbocompressors, Mechanical engineering: Leningrad, USSR; pp. 406 (in Russian).
]Search in Google Scholar
[
Seyed Amir Hosein Jafari, Kosasih P. B., 2014. Analysis of the power augmentation mechanisms of diffuser shrouded micro turbine with computational fluid dynamics simulations. Wind and Structures An International Journal, 19 (Number 2), pp. 199-217.10.12989/was.2014.19.2.199
]Search in Google Scholar
[
Stansel D.M., 2018. Gas turbine emissions improvements by advances in design, analysis, materials, manufacturing, and control technology. [Proc. of the 47th Turbomachinery & 34th Pump Symposia, George R. Brown Convention Centre], Houston, Texas, pp.20.
]Search in Google Scholar
[
Strahovich K.I., Frenkel M.I., Kondryakov I.K., Ris V.F., 1961.Compressor machines, State publishing house of trade literature Moscow, USSR; pp.600 (in Russian).
]Search in Google Scholar
[
Van Ness H. C., 1983. Understanding Thermodynamics, Dover ed. edition, Dover Publications: Mineola, New York, pp. 128.
]Search in Google Scholar
[
Wan, Y., Guan, J., Xu, S., 2017. Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application. International Journal of Hydrogen Energy, 42, pp. 5590-5605.10.1016/j.ijhydene.2016.08.162
]Search in Google Scholar
[
Xie H., Song M., Liu X., Yang B., Gu C., 2018. Research on the simplified design of a centrifugal compressor impeller based on meridional plane modification. Applied Sciences, 8, 1339, pp. 1-16.10.3390/app8081339
]Search in Google Scholar
