[
Barański, J., 2017: Moisture content during and after high- and normal-temperature drying processes of wood. Drying Technology, 36:751–761.
]Search in Google Scholar
[
Barański, J., Konopka, A., Vilkovská, T., Klement, I., Vilkovský, P., 2020: Deformation and surface color changes of beech and oak wood lamellas resulting from the drying process. BioResources, 15:8965–8980.
]Search in Google Scholar
[
Barcikowski, S., Ostendorf, A., Bunte, J., 2004: Laser cutting of wood and wood composites-Evaluation of cut quality and comparison to conventional wood cutting techniques. In: Proceedings of the Pacific International Conference on Applications of Lasers and Optics. 1st Pacific International Conference on Laser Materials Processing, Micro, Nano and Ultrafast Fabrication. Wuhan, People’s Republic of China, 104 p.
]Search in Google Scholar
[
Barcikowski, S., Koch, G., Odermatt, J., 2006: Characterisation and modification of the heat affected zone during laser material processing of wood and wood composites. Holz als Roh-und Werkstoff, 64:94–103.
]Search in Google Scholar
[
Barnekov, V. G., McMillin, C. W., Huber, H. A., 1986: Factors influencing laser cutting of wood. Forest Products Journal, 36:55–58.
]Search in Google Scholar
[
Çavdar, K., Tanrisever, T., 2013: Laser Cutting of Different Materials. Uludağ University Journal of The Faculty of Engineering, 18:79–99.
]Search in Google Scholar
[
Choudhury, I. A., Shirley, S., 2010: Laser cutting of polymeric materials: an experimental investigation. Optics & Laser Technology, 42:503–508.
]Search in Google Scholar
[
Eltawahni, H. A., Olabi, A. G., Benyounis, K. Y., 2011: Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43:648–659.
]Search in Google Scholar
[
Gajtanska, M., Christov, I., Igaz, R., 2004: Lasery a ich využitie v priemysle. Technical University in Zvolene, 295 p. (In Slovak).
]Search in Google Scholar
[
Gajtanska, M., Suja, J., Igaz, R., Krišťák, Ľ., Ružiak, I., 2015: Rezanie smrekového dreva CO2 laserom. Technical University in Zvolene, 82 p. (In Slovak).
]Search in Google Scholar
[
Hernandez-Castaneda, J. C., Sezer, H. K., Lin, L., 2011: The effect of moisture content in fibre laser cutting of pine wood. Optics and Lasers in Engineering, 49:1139–1152.
]Search in Google Scholar
[
Klement, I., Vilkovská, T., Vilkovský, P., Hýsek, Š., 2020: Structural differences between reaction wood and opposite wood with different drying temperatures. BioResources, 15:4407–4416.
]Search in Google Scholar
[
Kubovský, I., Igaz, R., 2014: Využitie CO2 lasera ako netradičného nástroja na zmenu farby dreva. Acta Facultatis Technicae, 1:79–88. (In Slovak).
]Search in Google Scholar
[
McMillin, Ch. W., Huber, H. A., 1985: Gluebond strength of laser cut wood. Forest Products Journal, 35:23–25.
]Search in Google Scholar
[
Perré, P., Martin, M., 1994: Drying at high temperature of sapwood and heartwood: theory, experiment and practical consequence on kiln control. Drying Technology, 12:1915–1941.
]Search in Google Scholar
[
Rabiej, R. J., Ramrattan, S. N., Droll, W. J., 1993: Glue-line shear strength of laser-cut wood. Forest Products Journal, 43:45.
]Search in Google Scholar
[
Ružiak, I., Igaz, R., Kubovský, I., Gajtanska, M., Jankech, A., 2022: Prediction of the effect of CO2 laser cutting conditions on sruce wood cut characteristics using an artificial neural network. Applied Science, 12:11355.
]Search in Google Scholar
[
Tayal, M., Barnekov, V., Mukherjee, K., 1994: Focal point location in laser machining of thick hard wood. Journal of Materials Science Letters, 13: 644–646.
]Search in Google Scholar
[
Wiedenbeck, J., Scholl, M., Blankenhorn, P., Ray, C., 2019: Defects and grading after kiln drying hard-wood lumber sawn from small-diameter logs. BioRe-sources, 14:4085–4099.
]Search in Google Scholar
[
Yeonjung, H., Yoon-Seong, CH., 2020: Wood properties and drying characteristics of Korean sawtooth oak (Quercus acutissima Carruth.). European Journal of Wood and Wood Products, 78:1023–1029.
]Search in Google Scholar
[
Yoon-Seong, CH., Yeonjung, H., Hyun-Kyeong, S., Min-Ji, K., 2020: Evaluation of drying and anatomical characteristics of Mongolian oaklumber by kiln drying with respect to storage time after sawing. European Journal of Wood and Wood Products, 78:1017–1022.
]Search in Google Scholar
[
Yusoff, N., Ismail, S. R., Mamat, A. & Ahmad-Yazid, A., 2008: Selected Malaysian wood CO2 laser cutting parameters and cut quality. American Journal of Applied Sciences, 5:990–996.
]Search in Google Scholar
[
Zhou, B. H., Mahdavian, S. M., 2004: Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2 laser. Journal of Materials Processing Technology, 146:188–192.
]Search in Google Scholar
[
STN EN 49 0103; Determination of Moisture Content of the Physical Mechanical Tests. Slovak Standards Institute: Bratislava, Slovakia, 1993.
]Search in Google Scholar
