<abstract xmlns="http://www.w3.org/1999/xhtml"><p>One of the ways to reduce human influence on the control process is the development of automated and automatic control systems. Modern control systems are quite complex and require preliminary ground testing. The article considers the issues of creating Imitation Modelling Stand for such control system synthesis and testing. For this reason, a Control System Model was integrated into the local computer network of the navigation simulator NTPRO 5000. The authors of the paper developed and tested software for information exchange between the navigation simulator and the Control System Model. The authors also developed a functional module of collision avoidance with many targets for testing in a closed loop system with virtual training objects. The results showed that the developed Imitation Modelling Stand allowed developing and testing functional modules of the control systems. In comparison with the found analogues, it is easy to include in a closed simulation cycle various models of command devices, actuators, control objects, objects of training scene, weather conditions; it is universal both for solving problems of manual control and for developing and testing automatic and automated control systems; it is not highly specialised and is created at minimal costs.</p></abstract>

One of the ways to reduce human influence on the control process is the development of automated and automatic control systems. Modern control systems are quite complex and require preliminary ground testing. The article considers the issues of creating Imitation Modelling Stand for such control system synthesis and testing. For this reason, a Control System Model was integrated into the local computer network of the navigation simulator NTPRO 5000. The authors of the paper developed and tested software for information exchange between the navigation simulator and the Control System Model. The authors also developed a functional module of collision avoidance with many targets for testing in a closed loop system with virtual training objects. The results showed that the developed Imitation Modelling Stand allowed developing and testing functional modules of the control systems. In comparison with the found analogues, it is easy to include in a closed simulation cycle various models of command devices, actuators, control objects, objects of training scene, weather conditions; it is universal both for solving problems of manual control and for developing and testing automatic and automated control systems; it is not highly specialised and is created at minimal costs.

Use of Simulator Equipment for the Development and Testing of Vessel Control Systems

Head of practice, certification and employment department

Electrical, Control and Communication Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

One of the ways to reduce human influence on the control process is the development of automated and automatic control systems. Modern control systems are...

Use of Simulator Equipment for the Development and Testing of Vessel Control Systems

Published Online: Apr 12, 2021

Page range: 58 - 64

DOI: https://doi.org/10.2478/ecce-2020-0009

Keywords
Automatic control, Closed loop systems, Collision avoidance, Control system synthesis, Motion control

© 2020 Serhii Zinchenko et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Use of Simulator Equipment for the Development and Testing of Vessel Control Systems

Published Online: Apr 12, 2021

Page range: 58 - 64

DOI: https://doi.org/10.2478/ecce-2020-0009

KeywordsAutomatic control, Closed loop systems, Collision avoidance, Control system synthesis, Motion control

© 2020 Serhii Zinchenko et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
Automatic control, Closed loop systems, Collision avoidance, Control system synthesis, Motion control