Frequency Diagnostics of Insulating System of Power Transformers

[1] M. Bartlomiejczyk, M. Gutten and S. Hamacek, “A Combined TOPSIS and FA Based Strategic Analysis of Technical Condition of High Power Transformers”, Advances in Electrical and Electronic Engineering, vol. 11, no. 4, 2013, pp. 251–259. https://doi.org/10.15598/aeee.v11i4.86310.15598/aeee.v11i4.863Search in Google Scholar

[2] M. Koch, M. Krueger and M. Puetter, “Advanced Insulation Diagnostic by Dielectric Spectroscopy”, Omicron Electronics Austria, 2011.Search in Google Scholar

[3] M. Brandt, “Identification failure of 3 MVA furnace transformer”, in: DEMISEE 2016, Proceedings of international conference Diagnostic of electrical machines and insulating systems in electrical engineering, Papradno, Slovakia, 2016. https://doi.org/10.1109/DEMISEE.2016.753047210.1109/DEMISEE.2016.7530472Search in Google Scholar

[4] M. Simko and M. Chupac, “Non-destructive method of measurement of radio transmitters antenna systems,” Electronics and electrical engineering, vol. 107, 2011, pp. 33–36.Search in Google Scholar

[5] J. Petras et al., “Thermally stimulated acoustic energy shift in transformer oil”, Acta Acustica United with Acustica, vol. 102, pp. 16–22, 2016. https://doi.org/10.3813/AAA.91892010.3813/AAA.918920Search in Google Scholar

[6] M. Rajnak et al., “Structure and viscosity of a transformer oil-based ferrofluid under an external electric field”, Journal of Magnetism and Magnetic Materials, vol. 431, 2017, pp. 99–102. https://doi.org/10.1016/j.jmmm.2016.10.00810.1016/j.jmmm.2016.10.008Search in Google Scholar

[7] J. Kanuch, Z. Ferkova, “Simulation stepping motor with DISC rotor”, International Conference on Low Voltage Electrical Machines, Brno, 2010.Search in Google Scholar

[8] M. Brandt, “Experimental measurement and analysis of frequency responses SFRA for rotating electrical machines”, in Elektroenergetika 2017, Stará Lesná, Slovak Republic, pp. 284–288, 2017.Search in Google Scholar

[9] M. Orman, C. T. Pinto, “Usage of acoustic camera for condition monitoring of electric motors”, in IEEE International Conference TENCON, IEEE, 2013. https://doi.org/10.1109/TENCON.2013.671890910.1109/TENCON.2013.6718909Search in Google Scholar

[10] C. Bartoletti et al., “Vibro-acoustic techniques to diagnose power transformers”, IEEE Transactions on Power Delivery, vol. 19, no. 1, pp. 221–229, 2004. https://doi.org/10.1109/TPWRD.2003.82017710.1109/TPWRD.2003.820177Search in Google Scholar

[11] A. Olszewska, F. Witos, “Identification of Acoustic Emission Signals Originating from the Core Magnetization of Power Oil Transformer”, Archives of Acoustics, vol. 41, no. 4, pp. 799–812, 2016. https://doi.org/10.1515/aoa-2016-007710.1515/aoa-2016-0077Search in Google Scholar

[12] J. Ramírez-Niño, A. Pascacio, “Acoustic measuring of partial discharge in power transformers”, Measurement Science and Technology, vol. 20, no. 11, 2009. https://doi.org/10.1088/0957-0233/20/11/11510810.1088/0957-0233/20/11/115108Search in Google Scholar

[13] T. Boczar, A. Cichon, S. Borucki, “Diagnostic expert system of transformer insulation systems using the acoustic emission method”, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 21, no. 2, pp. 854–865, 2014. https://doi.org/10.1109/TDEI.2013.00412610.1109/TDEI.2013.004126Search in Google Scholar

[14] M. Jin, J. Pan, “Vibration transmission from internal structures to the tank of an oil-filled power transformer”, Applied Acoustics, vol. 113, pp. 1–6, 2016. https://doi.org/10.1016/j.apacoust.2016.05.02210.1016/j.apacoust.2016.05.022Search in Google Scholar

[15] B. García, J. C. Burgos, A. M. Alonso, “Transformer tank vibration modeling as a method of detecting winding deformations-part I: theoretical foundation”, IEEE Transactions on Power Delivery, vol. 21, no. 1, pp. 157–169, 2006. https://doi.org/10.1109/TPWRD.2005.85228010.1109/TPWRD.2005.852280Search in Google Scholar

[16] M. Zhao et al., “Feature extraction of power transformer vibration signals based on empirical wavelet transform and multiscale entropy”, IET Science, Measurement & Technology, vol. 12, no. 1, pp. 63–71, 2018. https://doi.org/10.1049/iet-smt.2017.018810.1049/iet-smt.2017.0188Search in Google Scholar

[17] M. Koch, S. Tenbohlen, M. Krüger and A. Kraetge, “A Comparative Test and Consequent Improvements on Dielectric Response Methods” Proceedings of the XVth International Symposium on High Voltage Engineering, ISH, Ljubljana, Slovenia, 2007.Search in Google Scholar

[18] M. Koch, “Reliable Moisture Determination in Power Transformers”, PhD thesis, Institute of Energy Transmission and High Voltage Engineering, University of Stuttgart, Sierke Verlag Göttingen, 2008.Search in Google Scholar

[19] M. Gutten, D. Korenciak, M. Kucera, M. Sebok, M. Opielak, P. Zukowski and T. N. Koltunowicz, “Maintenance diagnostics of transformers considering the influence of short-circuit currents during operation,” Maintenance and Reliability, vol. 19, no. 3, 2017, pp. 459–466. https://doi.org/10.17531/ein.2017.3.1710.17531/ein.2017.3.17Search in Google Scholar

[20] C. Kozak, M. Sebok and M. Kucera, “The effect of direct voltage polarity on the value of electric arc burning on the W10 switch contacts,” Przeglad elektrotechniczny, vol. 88, 2012, pp. 96–98.Search in Google Scholar

[21] M. Koch and M. Kruger, “Moisture Determination by Improved On-Site Diagnostics”, TechCon Asia Pacific, Sydney, 2008.Search in Google Scholar

[22] R. Neimanis, “On Estimation of Moisture Content in Mass Impregnated Distribution Cables,” Stockholm: Royal Institute of Technology Stockholm, 2001.Search in Google Scholar

[23] B. Asad, T. Vaimann, A. Rassolkin, A. Kallaste, A. Belahcen, “Review of Electrical Machine Diagnostic Methods Applicability in the Perspective of Industry 4.0,” Electrical, Control and Communication Engineering, vol. 14, no. 2, pp. 108–116, 2018. https://doi.org/10.2478/ecce-2018-001310.2478/ecce-2018-0013Search in Google Scholar

[24] B. Asad, T. Vaimann, A. Rassolkin, A. Kallaste, A. Belahcen, “A Survey of Broken Rotor Bar Fault Diagnostic Methods of Induction Motor,” Electrical, Control and Communication Engineering, vol. 14, no. 2, pp. 117–124, 2018. https://doi.org/10.2478/ecce-2018-001410.2478/ecce-2018-0014Search in Google Scholar

[25] P. Spanik, J. Sedo, P. Drgona, M. Frivaldski, “Real Time Harmonic Analysis of Recuperative Current through Utilization of Digital Measuring Equipment”, Elektronika ir Elektronika, vol. 19, no. 5, 2013, pp 33–38. https://doi.org/10.5755/j01.eee.19.5.436410.5755/j01.eee.19.5.4364Search in Google Scholar

[26] J. Kudelcik, S. Hardon, L. Varacka, “Measurement of Complex Permittivity of Oil-Based Ferrofluid in Magnetic Field”, Acta Physica Polonica A, vol. 131, 2017, pp. 931–933. https://doi.org/10.12693/APhysPolA.131.93110.12693/APhysPolA.131.931Search in Google Scholar

[27] J. Kudelcik, S. P. Bury, S. Hardon, P. Kopcansky, M. Timko “Influence of nanoparticles diameter on structural properties of magnetic fluid in magnetic field”, Jornal of Electricla Engineering -Elektrotechnicky casopis, vol. 66, no. 4, 2015, pp. 231–234. https://doi.org/10.2478/jee-2015-003710.2478/jee-2015-0037Search in Google Scholar