Effect of Fire on Reinforced Concrete Beams with FRP and Conventional Steel at Limited Time of Fire

The aim of this study is to investigate the behavior of RC concrete beams reinforced with basalt, carbon, glass fiber reinforced polymer bars and conventional steel. A comparison between the results has been performed to investigate and study the effect of fire on reinforced concrete beams considering the following items: (flexural capacity, deflection behavior and crack pattern). It is noticeable that the use of FRP bars significantly increased the ultimate load of the specimens, where the percentage of increase ranged between 34 - 73 % of the ultimate load of the specimen C-S under static load. The greatest ultimate load was reached the beam that was reinforced with carbon bars (CFRP). It was also noticed able that the use of FRP rods significantly increases the deflection of the beams. The percentage of increase was between 45 - 170 % of the final deflection of the C-S specimen under static load. It was noted that the effect of the fire on the beams reinforced with fiber bars (FRP), where the efficiency of bearing capacity of beams after fire decreases by 11 to 18 % of the actual efficiency of bearing capacity of beams control. As for the beam reinforced with conventional steel bars, its efficiency was reduced by 15 % from the actual capacity.