[
[1] HUSAIN, M. A. – HAMAD, S. Y. – FARAJ, M. M. – HASAN, Z. H.: Prediction of compressive strength of the masonry of Al-Malwiya historic minaret in Samarra. Materials Today. Proceedings. Vol. 42, Part 5, Jan. 2021, pp. 2314–2319, doi: 10.1016/j.matpr.2020.12.321.10.1016/j.matpr.2020.12.321
]Search in Google Scholar
[
[2] ASTM C1314 - 14: Standard Test Method for Compressive Strength of Masonry Prisms. ASTM International, Pennsylvania, United States, 2014.
]Search in Google Scholar
[
[3] PAULAY, T. – PRIESTLY, M. J. N.: Seismic Design of Reinforced Concrete and Masonry Buildings. Hoboken, NJ, USA: John Wiley & Sons, Inc., 1992.10.1002/9780470172841
]Search in Google Scholar
[
[4] DRYDALE, R. G. – HAMID, A. A. – BAKER, R.: Masonry structures-behaviour and design. Pract. Hall, Ennglewood Cliffs, New Jersey, 1994.
]Search in Google Scholar
[
[5] CSA S304.1: Design of masonry structures. Canadian Standards Association, Ontario, Canada, 2004.
]Search in Google Scholar
[
[6] CEN, Eurocode 6: Design of masonry structures. General rules for reinforced and unreinforced masonry structures. European Committee for Standardization, Brussels, Belgium, 2005.
]Search in Google Scholar
[
[7] KAUSHIK, H. B. – RAI, D. C. – JAIN, S. K.: Stress-Strain Characteristics of Clay Brick Masonry under Uniaxial Compression. J. Mater. Civ. Eng., Vol. 19, No. 9, 2007, pp. 728–739, doi:10.1061/(asce) 0899-1561(2007)19:9(728).10.1061/(ASCE)0899-1561(2007)19:9(728)
]Search in Google Scholar
[
[8] MSJC, Masonry Standards Joint Committee: Building code requirements for masonry structures, American Concrete Institute, Structural Engineering Institute of the American Society of Civil Engineers, The Masonry Society. Detroit, 2008.
]Search in Google Scholar
[
[9] LUMANTARNA, R. – BIGGS, D. T. – INGHAM, J. M.: Uniaxial Compressive Strength and Stiffness of Field-Extracted and Laboratory-Constructed Masonry Prisms. J. Mater. Civ. Eng., Vol. 26, No. 4, 2014, pp. 567–575, doi: 10.1061/(asce)mt.1943-5533.0000731.10.1061/(ASCE)MT.1943-5533.0000731
]Search in Google Scholar
[
[10] COSTIGAN, A. – PAVIA, S. – KINNANE, O.: An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression. J. Build. Eng., Vol. 4, No. November 2015, pp. 283–294, doi: 10.1016/j.jobe.2015.10.001.10.1016/j.jobe.2015.10.001
]Search in Google Scholar
[
[11] GUADAGNUOLO, M. – AURILIO, M. – BASILE, A. – FAELLA, G.: Modulus of Elasticity and Compressive Strength of Tuff Masonry: Results of a Wide Set of Flat-Jack Tests. Buildings, Vol. 10, No. 5. 2020, doi: 10.3390/buildings10050084.10.3390/buildings10050084
]Search in Google Scholar
[
[12] BINDA, L. – SAISI, A.: Application of NDTs to the diagnosis of historic structures. NDTCE’09. Non-Destructive Test. Civ. Eng. Nantes, 2009.
]Search in Google Scholar
[
[13] BOSILJKOV, V. Z. – TOTOEV, Y. Z. – NICHOLS, J. M.: Shear modulus and stiffness of brickwork masonry: An experimental perspective. Struct. Eng. Mech., Vol. 20, No. 1, May 2005, pp. 21–43, doi: 10.12989/sem.2005.20.1.021.10.12989/sem.2005.20.1.021
]Search in Google Scholar
[
[14] RADOVANOVIC, Z. – SINDIC, R. – DIMOVSKA, S. – SERDAR, N. – VATIN, N. – MURGUL, V.: The mechanical properties of masonry walls - Analysis of the test results. Procedia Eng., Vol. 117, No. 1, 2015, pp. 865–873, doi: 10.1016/j.proeng.2015.08.155.10.1016/j.proeng.2015.08.155
]Search in Google Scholar
[
[15] CAVALERI, L. – PAPIA, M. – NACALUSO, G. – DI TRAPANI, F. – COLAJANNI, P.: Definition of diagonal Poisson’s ratio and elastic modulus for infill masonry walls. Mater. Struct. Constr., Vol. 47, No. 1–2, Jan. 2014, pp. 239–262, doi: 10.1617/s11527-013-0058-9.10.1617/s11527-013-0058-9
]Search in Google Scholar
[
[16] DAWOOD, A. O. – MUSSA, F. I. – AL KHAZRAJI, H. – ABD, H. A. – YASSER, M. M.: Investigation of Compressive Strength of Straw Reinforced Unfired Clay Bricks for Sustainable Building Comstruction. Civil and Environmental Engineering, Vol. 17, Iss.1, 2021, pp. 150-163, doi:10.2478/cee-2021-0016.10.2478/cee-2021-0016
]Search in Google Scholar
