[
[1] E. Schade, “Physics of high-current interruption of vacuum circuit breakers,” IEEE Trans. Plasma Sci., vol. 33, no. 5 I, pp. 1564–1575, 200510.1109/TPS.2005.856530
]Search in Google Scholar
[
[2] Z. Liu et al., “Development of high-voltage vacuum circuit breakers in China,” IEEE Trans. Plasma Sci., vol. 35, no. 4 II, pp. 856–865, 200710.1109/TPS.2007.896929
]Search in Google Scholar
[
[3] D. Konig, “The role of vacuum in circuit breaker technology,” Proc. - Int. Symp. Discharges Electr. Insul. Vacuum, ISDEIV, pp. 1–14, 2012.10.1109/DEIV.2012.6412366
]Search in Google Scholar
[
[4] H. Wang et al., “The influence from the residual magnetic field on the plasma dissipation in the post-arc phase in a vacuum interrupter,” Proc. - Int. Symp. Discharges Electr. Insul. Vacuum, ISDEIV, pp. 1–4, 201610.1109/DEIV.2016.7763935
]Search in Google Scholar
[
[5] Z. Wang et al., “Fully kinetic model of breakdown during sheath expansion after interruption of vacuum arcs,” J. Appl. Phys., vol. 120, no. 8, 201610.1063/1.4961420
]Search in Google Scholar
[
[6] Z. Wang, Y. Tian, Y. Geng, and Z. Liu, “Simulation of breakdown in Cu-Cr metal vapor after vacuum arc extinctions,” 2013 2nd Int. Conf. Electr. Power Equip. - Switch. Technol. ICEPE-ST 2013, pp. 8–11, 2013
]Search in Google Scholar
[
[7] S. Yanabu, S. Souma, T. Tamagawa, S. Yamashita, and T. Tsutsumi, “Vacuum Arc Under an Axial Magnetic Field and Its Interrupting Ability.,” Proc Inst Electr Eng, vol. 126, no. 4, pp. 313–320, 197910.1049/piee.1979.0079
]Search in Google Scholar
[
[8] D. Wang, L. Wang, Z. Wang, Y. Huang, R. Zhang, and S. Jia, “2-D particle simulation on the influence of transverse magnetic field on the plasma decay in postarc stage of vacuum circuit breakers,” IEEE Trans. Plasma Sci., vol. 48, no. 11, pp. 3975–3981, 202010.1109/TPS.2020.3028646
]Search in Google Scholar
[
[9] L. Wang, Z. Yang, J. Jiang, Y. Wang, and S. Jia, “Study of vacuum arc behaviour under anode spot and anode plume modes,” Appl. Phys. Lett., vol. 115, no. 1, 201910.1063/1.5110538
]Search in Google Scholar
[
[10] L. Sun, L. Yu, Z. Liu, J. Wang, and Y. Geng, “An opening displacement curve characteristic determined by high-current anode phenomena of a vacuum interrupter,” IEEE Trans. Power Deliv., vol. 28, no. 4, pp. 2585–2593, 201310.1109/TPWRD.2013.2264487
]Search in Google Scholar
[
[11] L. Yu, J. Wang, Y. Geng, G. Kong, and Z. Liu, “High-current vacuum arc phenomena of nanocrystalline CuCr25 contact material,” IEEE Trans. Plasma Sci., vol. 39, no. 6 PART 1, pp. 1418–1426, 2011.
]Search in Google Scholar
[
[12] X. Yao et al., “Development and Type Test of a Single-Break 126-kV/40-kA-2500-A Vacuum Circuit Breaker,” IEEE Trans. Power Deliv., vol. 31, no. 1, pp. 182–190, 201610.1109/TPWRD.2015.2456033
]Search in Google Scholar
[
[13] X. Song, Z. Shi, S. Jia, and L. Wang, “Self-magnetic field calculation in modeling the current-carrying electrode system with plasma jet and cathode spot motion in a vacuum arc,” IEEE Trans. Plasma Sci., vol. 39, no. 8, pp. 1743–1749, 201110.1109/TPS.2011.2158612
]Search in Google Scholar
[
[14] S. Jia, X. Song, Z. Shi, L. Wang, and X. Huo, “Investigations on the motion of high-current vacuum-arc cathode spots under a magnetic field,” IEEE Trans. Plasma Sci., vol. 39, no. 6 PART 1, pp. 1344–1348, 201110.1109/TPS.2011.2127492
]Search in Google Scholar
[
[15] G. Kong, Z. Liu, Y. Geng, H. Ma, and X. Xue, “Anode spot formation threshold current dependent on dynamic solid angle in vacuum subjected to axial magnetic fields,” IEEE Trans. Plasma Sci., vol. 41, no. 8, pp. 2051–2060, 201310.1109/TPS.2013.2259182
]Search in Google Scholar
[
[16] Z. Liu, G. Kong, H. Ma, Y. Geng, and J. Wang, “Estimation of critical axial magnetic field to prevent anode spots in vacuum interrupters,” IEEE Trans. Plasma Sci., vol. 42, no. 9, pp. 2277–2283, 2014.
]Search in Google Scholar
[
[17] Y. Tan et al., “Repulsion Mechanism Applied in Resistive-Type Superconducting Fault Current Limiter,” IEEE Trans. Appl. Supercond., vol. 26, no. 6, 201610.1109/TASC.2016.2544820
]Search in Google Scholar
[
[18] H. Odaka, M. Yamada, R. Sakuma, D. Cuie, E. Kane-ko, and S. Yanabu, “DC interruption characteristic of vacuum circuit breaker,” Electr. Eng. Japan (English Transl. Denki Gakkai Ronbunshi), vol. 161, no. 1, pp. 17–25, 200710.1002/eej.20362
]Search in Google Scholar
[
[19] I. Shimizu, Y. Naito, I. Yamaguchi, K. Kaiho, H. Mizoguchi, and S. Yanabu, “Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch,” Electr. Eng. Japan (English Transl. Denki Gakkai Ronbunshi), vol. 164, no. 1, pp. 52–61, 200810.1002/eej.20315
]Search in Google Scholar
[
[20] L. Ren et al., “Development of an electromagnetic repulsion mechanism for a 40.5kV fast vacuum circuit breaker,” ICEPE-ST 2017 - 4th Int. Conf. Electr. Power Equipment- Switch. Technol., vol. 2017-December, no. 51221005, pp. 929–933, 201710.1109/ICEPE-ST.2017.8188990
]Search in Google Scholar
[
[21] B. Zhang et al., “A Relationship between Minimum Arcing Interrupting Capability and Opening Velocity of Vacuum Interrupters in Short-Circuit Current Interruption,” IEEE Trans. Power Deliv., vol. 33, no. 6, pp. 2822–2828, 201810.1109/TPWRD.2018.2838344
]Search in Google Scholar
[
[22] P. G. Slade and M. D. Nahemow, “Initial separation of electrical contacts carrying high currents,” J. Appl. Phys., vol. 42, no. 9, pp. 3290–3297, 197110.1063/1.1660728
]Search in Google Scholar
[
[23] A. Anders. “Ion charge state distributions of vacuum arc plasmas: The origin of species,” Physical Review E, vol. 55, no. 1, pp. 969–981, 199710.1103/PhysRevE.55.969
]Search in Google Scholar
[
[24] V. F. Puchkarev and M. B. Bochkarev, “High current density spotless vacuum arc as a glow discharge,” IEEE Trans. Plasma Sci., vol. 25, no. 4, pp. 593–597, 199710.1109/27.640670
]Search in Google Scholar