<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This article explores the process of calibrating the properties of DC01 materials for finite element analysis using ABAQUS and Isight. Precise calibration of yield strength and tensile strength is crucial for accurately modeling material behavior under various loading conditions. The article details the sample preparation process, deformation measurements, and tensile tests to obtain experimental data. These data are then used to calibrate the DC01 material model in ABAQUS with the assistance of Isight, ensuring that the simulations accurately reflect real-world behavior. The results indicate the success of the calibration, facilitating the design and testing of products in a predictive virtual environment. Precise calibration is essential for predicting material behavior in real-world conditions and minimizing the risk of implementation failures.</p>
</abstract>

This article explores the process of calibrating the properties of DC01 materials for finite element analysis using ABAQUS and Isight. Precise calibration of yield strength and tensile strength is crucial for accurately modeling material behavior under various loading conditions. The article details the sample preparation process, deformation measurements, and tensile tests to obtain experimental data. These data are then used to calibrate the DC01 material model in ABAQUS with the assistance of Isight, ensuring that the simulations accurately reflect real-world behavior. The results indicate the success of the calibration, facilitating the design and testing of products in a predictive virtual environment. Precise calibration is essential for predicting material behavior in real-world conditions and minimizing the risk of implementation failures.

Calibrating DC01 Material Properties for Finite Element Analysis with Abaqus and Isight

Faculty of Engineering, Department of Industrial Machines and Equipment

Faculty of Engineering, Department of Industrial Engineering and Management

Acta Universitatis Cibiniensis. Technical Series

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This article explores the process of calibrating the properties of DC01 materials for finite element analysis using ABAQUS and Isight. Precise calibration of...

Calibrating DC01 Material Properties for Finite Element Analysis with Abaqus and Isight

Published Online: Dec 29, 2023

Page range: 30 - 34

DOI: https://doi.org/10.2478/aucts-2023-0004

Keywords
Finite Element Analysis, Calibration, Material Behavior, Model Adjustment

© 2023 Ilie-Octavian Popp et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Calibrating DC01 Material Properties for Finite Element Analysis with Abaqus and Isight

Published Online: Dec 29, 2023

Page range: 30 - 34

DOI: https://doi.org/10.2478/aucts-2023-0004

KeywordsFinite Element Analysis, Calibration, Material Behavior, Model Adjustment

© 2023 Ilie-Octavian Popp et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
Finite Element Analysis, Calibration, Material Behavior, Model Adjustment