[
ABBASPOUR-GILANDEH, Y. – SEDGHI, R. 2015. Predicting soil fragmentation during tillage operation using fuzzy logic approach. Journal of Terramechanics. vol. 57, pp. 61–69. DOI: https://doi.org/10.1016/j.jterra.2014.12.002
]Search in Google Scholar
[
ABRAHÁM, R. – ZUBČÁK, T. – MAJDAN, R. – KOLLÁROVÁ, K. – MATEJKOVÁ, E. – MASAROVIČOVÁ, S. – DRLIČKA, R. 2022. Drawbar performance of tractor tyres with steel spikes at 100%-wheel slip. In Acta Technologica Agriculturae, vol. 25, no. 2, pp. 97–104. DOI: https://doi.org/10.2478/ata-2022-0016
]Search in Google Scholar
[
AL-HAMED, S. – WAHBY, M. – ABOUKARIMA, A. – AHMED, K. 2014. Development of a computer program using visual basic for predicting performance parameters of tillage implements. In MISR Journal of Agricultural Engineering, vol. 31, no. 3, pp. 1157–1190. DOI: https:/doi.org/10.21608/mjae.2014.99147
]Search in Google Scholar
[
AL-JANOBI, A. – AL-HAMED, S. – ABOUKARIMA, A. – ALMAJHADI, Y. 2020. Modelling of draft and energy requirements of a mouldboard plough using artificial neural networks based on two novel variables. In Engenharia Agrícola, vol. 40, no. 3, pp. 363–373. DOI: https://doi.org/10.1590/1809-4430-Eng.Agric.v40n3p363-373/2020
]Search in Google Scholar
[
ALMALIKI, S. A. – HIMOUD, M. S. – MUHSIN, S. J. 2021. Mathematical model for evaluating slippage of tractor under various field conditions. In Basrah Journal of Agricultural Sciences, vol. 34, no. 1, pp. 49–59. DOI: https://doi.org/10.37077/25200860.2021.34.1.05
]Search in Google Scholar
[
ALMALIKI, S. A. 2018. Simulation of draft force for three types of plow using response surface method under various field conditions. In Iraqi Journal of Agricultural Sciences, vol. 49, no. 6, pp. 1123–1131. DOI: https://doi.org/10.36103/ijas.v49i6.151
]Search in Google Scholar
[
ALWAN, A. A. 2019. A field study of soil pulverisation energy by using different mouldboards types under various operating condition. In Basrah Journal of Agricultural Sciences, vol. 32, no. 2, pp. 373–388. DOI: https://doi.org/10.37077/25200860.2019.284
]Search in Google Scholar
[
BLACK, C. A. 1965. Methods of Soil Analysis. Part 1 Physical and Mineralogical Properties Including Statistics of Measurement and Sampling. 9.1. Madison, Wisconsin : American Society of Agronomy Inc., 770 pp. ISBN 9780891182030. DOI: https://doi.org/10.2134/agronmonogr9.1
]Search in Google Scholar
[
CVIKLOVIČ, V. – SRNÁNEK, R. – HRUBÝ, D. – HARNIČÁROVÁ, M. 2021. The control reversing algorithm for autonomous vehicles with PSD-controlled trailers. In Acta Technologica Agriculturae, vol. 24, no. 4, pp. 187–194. DOI: https://doi.org/10.2478/ata-2021-0031
]Search in Google Scholar
[
DAHHAM, G. A. – AL-IRHAYIM, M. N. – AL-MISTAWI, K. E. – KHESSRO, M. K. 2023. Performance evaluation of artificial neural network modelling to a ploughing unit in various soil conditions. In Acta Technologica Agriculture, vol. 26, no. 4, pp. 194–200. DOI: https://doi.org/10.2478/ata-2023-0026
]Search in Google Scholar
[
LENTH, R. V. 2009. Response-surface methods in R, using rsm. In Journal of Statistical Software, vol. 32, no. 7, pp.1–17. DOI: https://www.jstatsoft.org/article/view/v032i07
]Search in Google Scholar
[
MUHSIN, S. J. 2017. Performance study of mouldboard plow with two types of disc harrows and their effect on some soil properties under different operating conditions. In Basrah Journal of Agricultural Sciences, vol. 30, no. 2, pp. 1–15. DOI: https://doi.org/10.37077/25200860.2017.37
]Search in Google Scholar
[
NASSIR, A. J. 2018. Effect of mouldboard plow types on soil physical properties under different soil moisture content and tractor speed. In Basrah Journal of Agricultural Sciences, vol. 31, no. 1, pp. 48–58. DOI: https://doi.org/10.37077/25200860.2018.75
]Search in Google Scholar
[
NASSIR, A. J. – MUHSIN, S. J. – NDAWI, D. R. 2022. The technical evaluation of three different types of tillage combined machines and compared them with individual tillage machines. In Basrah Journal of Agricultural Sciences, vol. 35, no. 2, pp. 341–361. DOI: https://doi.org/10.37077/25200860.2022.35.2.26
]Search in Google Scholar
[
NATSIS, A. – PAPADAKIS, G. – PITSILIS, J. 1999. The influence of soil type, soil water and share sharpness of a mouldboard plough on energy consumption, rate of work and tillage quality. In Journal of Agricultural Engineering Research, vol. 72, no. 2, pp. 171–176. DOI: https://doi.org/10.1006/jaer.1998.0360
]Search in Google Scholar
[
ODUMA, O. – EHIOMOGUE, P. – NTUNDE, D. I. 2023. Model development and optimisation of the disk plough efficiency on loamy-sand soil in South-East Nigeria. In Research in Agricultural Engineering, vol. 69, no. 1, pp. 9–17. DOI: https://doi.org/10.17221/72/2021-RAE
]Search in Google Scholar
[
ODUMA, O. – EHIOMOGUE, P. – OKEKE, C. G. – ORJI, N. F. – UGWU, E. C. – UMUNNA, M. F. – NWOSU-OBIEOGU, K. 2022. Modelling and optimization of energy requirements of disc plough operation on loamy-sand soil in South-East Nigeria using response surface methodology. In Scientific African, vol. 17, article no. e01325. DOI: https://doi.org/10.1016/j.sciaf.2022.e01325
]Search in Google Scholar
[
ODUMA, O. 2019. Development of empirical regression equations for predicting the performances of disk plough and harrow in clay-loam soil. In Agricultural Engineering International: CIGR Journal, vol. 21, no. 3, pp. 18–25.
]Search in Google Scholar
[
UMANI, K. C. – FAKAYODE, O. A. – ITUEN, E. U. U. – OKOKON, F. B. 2019. Development and testing of an automated contact plate unit for a cassava grater. In Computers and Electronics in Agriculture, vol. 157, pp. 530–540. DOI: https://doi.org/10.1016/j.compag.2019.01.028
]Search in Google Scholar
[
USABORISUT, P. – SUKCHAROENVIPHARAT, W. – CHOEDKIATPHON, S. 2020. Tilling tests of rotary tiller and power harrow after subsoiling. In Journal of the Saudi Society of Agricultural Sciences, vol. 19, no. 6, pp. 391–400. DOI: https://doi.org/10.1016/j.jssas.2020.05.002
]Search in Google Scholar
