Determining the Suitability of Various Surface Treatment Methods with the Control of Blasting Time with Respect to the Quality of Powder Coating

ÁGREDA, C. G. – MENDES, M. W. D. – BRESSIANI, J. C. – BRESSIANI, A. H. A. 2012. Apatite coating on titanium samples obtained by powder metallurgy. In Advances in Science and Technology, vol. 86, pp. 28–33. DOI: https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AST.86.28Search in Google Scholar

BADILA, M. – JOCHAM, C. – ZHANG, W. – SCHMIDT, T. – WUZELLA, G. – MÜLLER, U. – KANDELBAUER, A. 2014. Powder coating of veneered particle board surfaces by hot pressing. In Progress in Organic Coatings, vol. 77, no. 10, pp. 1547–1553. DOI: https://doi.org/10.1016/j.porgcoat.2013.09.018Search in Google Scholar

BAJAT, J. B. – POPIĆ, J. P. – MIŠKOVIĆ-STANKOVIĆ, V. B. 2010. The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating. In Progress in Organic Coatings, vol. 69, no. 4, pp. 316–321. DOI: https://doi.org/10.1016/j.porgcoat.2010.07.004Search in Google Scholar

BARCOVA, K. – MASHLAN, M. – ZBORIL, R. – FILIP, J. – PODJUKLOVA, J. – HRABOVSKA, K. – SCHAAF, P. 2006. Phase composition of steel-enamel interfaces: Effects of chemical pre-treatment. In Surface and Coatings Technology, vol. 201, no. 3–4, pp. 1836–1844. DOI: https://doi.org/10.1016/J.SURFCOAT.2006.03.015Search in Google Scholar

BLAŽEK, J. 2009. Optimization of Curing Temperature in Powder Coating. 68 pp. Diploma thesis. Brno University of Technology. Available at: http://dspace.vutbr.cz/handle/11012/5233 (In Czech: Optimalizace teploty vytvrzování při práškovém lakování)Search in Google Scholar

BOCHON, I. – KARETH, S. – KILZER, A. – PETERMANN, M. 2015. Synthesis and powder generation of powder coatings using supercritical carbon dioxide. In The Journal of Supercritical Fluids, vol. 96, pp. 324–333. DOI: https://doi.org/10.1016/j.supflu.2014.09.042Search in Google Scholar

BULGAKOV, V. – FINDURA, P. – KROČKO, V. – NOZDROVICKÝ, L. – KORENKO, M. – KUVACHOV, V. 2018. Experimental study of operational properties of two-machine drilling aggregate. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 81–86. DOI: https://doi.org/10.2478/ATA-2018-0015Search in Google Scholar

CAI, Y. – WANG, X. – WAN, L. – YANG, J. – GAO, Y. 2020. Preparation of antimony-doped stannate chemical conversion coating on AZ31B Mg alloy. In Transactions of the Indian Institute of Metals, vol. 73, pp. 1891–1898. DOI: https://doi.org/10.1007/s12666-020-01996-8Search in Google Scholar

CARBONERAS, M. – HERNÁNDEZ, L. S. – DEL VALLE, J. A. – GARCÍA-ALONSO, M. C. – ESCUDERO, M. L. 2010. Corrosion protection of different environmentally friendly coatings on powder metallurgy magnesium. In Journal of Alloys and Compounds, vol. 496, no. 1–2, pp. 442–448. DOI: https://doi.org/10.1016/J.JALLCOM.2010.02.043Search in Google Scholar

CATARINA, G. A. S. – BORSOI, C. – ROMANZINI, D. – PIAZZA, D. – KUNST, S. R. – SCIENZA, L. C. – ZATTERA, A. J. 2017. Development of acrylic-based powder coatings with incorporation of montmorillonite clays. In Journal of Applied Polymer Science, vol. 134, no. 27, article no. 45031. DOI: https://doi.org/10.1002/APP.45031Search in Google Scholar

CONG, P. K. – FELLNER, P. 1993. Influence of the Pretreatment of Silicon Powder by Electroless Nickel Coating on Its Codeposition with Nickel. In Chemical Papers, vol. 48, no. 5, pp. 326–329. Available at: https://chempap.org/file_access.php?file=485a326.pdfSearch in Google Scholar

ČSN EN ISO 2409: 2021. Coating materials – Grid test. (In Czech: Nátěrové hmoty – Mřížková zkouška)Search in Google Scholar

DILLARD, J. G. – JACKSON, F. R. – HOLMES, B. L. – AARTUN, L. – PARVATAREDDY, H. – DILLARD, D. A. – ZATORSKI, R. 2006. The durability of adhesively-bonded titanium: performance of plasma-sprayed polymeric coating pretreatments. In The Journal of Adhesion, vol. 65, no. 1–4, pp. 217–238. DOI: https://doi.org/10.1080/00218469808012247Search in Google Scholar

FENG, Y. – YANG, H. – YANG, Z. – HU, C. – WU, C. – WU, L. 2021. A review of the design, properties, applications, and prospects of Ni-based composite powders. In Materials & Design, vol. 208, article no. 109945. DOI: https://doi.org/10.1016/J.MATDES.2021.109945Search in Google Scholar

FREY, M. – ÉDOUARD, D. – ROGER, A. C. 2015. Optimization of structured cellular foam-based catalysts for low-temperature carbon dioxide methanation in a platelet milli-reactor. In Comptes Rendus Chimie, vol. 18, no. 3, pp. 283–292. DOI: https://doi.org/10.1016/J.CRCI.2015.01.002Search in Google Scholar

FU, J. – KRANTZ, M. – ZHANG, H. – ZHU, J. – KUO, H. – WANG, Y. M. – LIS, K. 2011. Investigation of the recyclability of powder coatings. In Powder Technology, vol. 211, no. 1, pp. 38–45. DOI: https://doi.org/10.1016/J.POWTEC.2011.03.016Search in Google Scholar

GOLGOON, A. – ALIOFKHAZRAE, M. – TOORANI, M. 2018. Nanocomposite protective coatings fabricated by electrostatic spray method. In Protection of Metals and Physical Chemistry of Surfaces, vol. 54, pp. 192–221. DOI: https://doi.org/10.1134/S207020511802017XSearch in Google Scholar

GURURAJ, T. – SUBASRI, R. – RAJU, K. R. C. S. – PADMANABHAM, G. 2011. Effect of plasma pretreatment on adhesion and mechanical properties of UV-curable coatings on plastics. In Applied Surface Science, vol. 257, no. 9, pp. 4360–4364. DOI: https://doi.org/10.1016/J.APSUSC.2010.12.060Search in Google Scholar

IUGA, A. – MORAR, R. – SAMUILA, A. – DASCALESCU, L. 2001. Electrostatic separation of metals and plastics from granular industrial wastes. In IEE Proceedings: Science, Measurement and Technology, vol. 148, no. 2, pp. 47–54. DOI: https://doi.org/10.1049/IP-SMT:20010356Search in Google Scholar

KARAOGLAN, A. D. – OZDEN, E. 2021. Electrostatic powder coating process optimisation by implementing design of experiments. In Transactions of the IMF, vol. 99, no. 1, pp. 46–52. DOI: https://doi.org/10.1080/00202967.2020.1846349Search in Google Scholar

KOZAKIEWICZ, J. – OFAT, I. – TRZASKOWSKA, J. – KUCZYŃSKA, H. 2015. Studies on silicone-acrylic hybrid aqueous dispersions and corresponding silicone-acrylic nanopowders designed for modification of powder coatings and plastics: Part II – Effect of modification with silicone-acrylic nanopowders and of composition of silicone resin contained in those nanopowders on properties of epoxy-polyester and polyester powder coatings. In Progress in Organic Coatings, vol. 78, pp. 419–428. DOI: https://doi.org/10.1016/j.porgcoat.2014.01.010Search in Google Scholar

KLIMEŠ, L. 2003. About the history and production of powdered plastics. In Surface Coatings, vol. 2003, no. 3, pp. 18–19. (In Czech: O historii a výrobě práškových plastů)Search in Google Scholar

LOTHONGKUM, A. W. – NONTHAPONE, R. – SEANGKIATIYUTH, K. – TANTHAPANICHKOON, W. 2007. Powder characteristics and coating conditions of fresh and reused polyester resins for electrostatic powder coating: powder recycling and loss prevention. In Advanced Powder Technology, vol. 18, no. 2, pp. 175–186. DOI: https://doi.org/10.1163/156855207780208664Search in Google Scholar

LOUATI, H. – TILMATINE, A. – OUIDDIR, R. – ALIBIDA, A. – ZOUZOU, N. 2020. New separation technique of metal/polymer granular materials using an electrostatic sorting device. In Journal of Electrostatics, vol. 103, article no. 103410. DOI: https://doi.org/10.1016/j.elstat.2019.103410Search in Google Scholar

LOUATI, H. – ZOUZOU, N. – TILMATINE, A. – ZOUAGHI, A. – OUIDDIR, R. 2021. Experimental investigation of an electrostatic adhesion device used for metal/polymer granular mixture sorting. In Powder Technology, vol. 391, pp. 301–310. DOI: https://doi.org/10.1016/j.powtec.2021.06.019Search in Google Scholar

MOHYLA, M. 2006. Technology of Surface Treatment of Metals. 3^rd ed. Ostrava : VSB – Technical University of Ostrava, 150 pp. ISBN 80-248-1217-7. (In Czech: Technologie povrchových úprav kovů)Search in Google Scholar

MIRABEDINI, S. M. – MORADIAN, S. – SCANTLEBURY, J. D. – THOMPSON, G. E. 2002. The role of interfacial layers on the performance of an epoxy/polyester powder coated aluminium alloy. In Iranian Polymer Journal. In Iranian Polymer Journal, vol. 11, pp. 167–176.Search in Google Scholar

PÉREZ, C. – COLLAZO, A. – IZQUIERDO, M. – MERINO, P. – NÓVOA, X. R. 2002. Comparative study between galvanised steel and three duplex systems submitted to a weathering cyclic test. In Corrosion Science, vol. 44, no. 3, pp. 481–500. DOI. https://doi.org/10.1016/S0010-938X(01)00070-1Search in Google Scholar

PRENDI, L. – MILLS, M. – BASTIEN, J. – HENSHAW, P. 2015. Thermosetting powder coatings: Finish appearance and durability at cure window corner points. In Progress in Organic Coatings, vol. 78, pp. 411–418. DOI: https://doi.org/10.1016/J.PORGCOAT.2014.01.025Search in Google Scholar

PUIG, M. – CABEDO, L. – GRACENEA, J. J. – JIMÉNEZ-MORALES, A. – GÁMEZ-PÉREZ, J. – SUAY, J. J. 2014. Adhesion enhancement of powder coatings on galvanised steel by addition of organo-modified silica particles. In Progress in Organic Coatings, vol. 77, no. 8, pp. 1309-1315. DOI: https://doi.org/10.1016/j.porgcoat.2014.03.017Search in Google Scholar

PUIG, M. – CABEDO, L. – GRACENEA, J. J. – SUAY, J. J. 2015. The combined role of inhibitive pigment and organo-modified silica particles on powder coatings: Mechanical and electrochemical investigation. In Progress in Organic Coatings, vol. 80, pp. 11–19. DOI: https://doi.org/10.1016/j.PORGCOAT.2014.11.014Search in Google Scholar

RAMANATHAN, E. – BALASUBRAMANIAN, S. 2016. Synthesis and characterization of hexafluorozirconic acid powder and its application in nanoceramic coating. In Surface and Coatings Technology, vol. 304, pp. 228–236. DOI: https://doi.org/10.1016/J.SURFCOAT.2016.07.009Search in Google Scholar

RUDAWSKA, A. – WAHAB, M. A. 2019. The effect of cataphoretic and powder coatings on the strength and failure modes of EN AW-5754 aluminium alloy adhesive joints. In International Journal of Adhesion and Adhesives, vol. 89, pp. 40–50. DOI: https://doi.org/10.1016/J.IJADHADH.2018.11.005Search in Google Scholar

RUSTICO, E. Z. – MATIAS, A. C. – GREPO, L. C. 2015. Manpower utilization in the powder coating production of a powder coating company. In Procedia Manufacturing, vol. 3, pp. 332–339. DOI: https://doi.org/10.1016/J.PROMFG.2015.07.166Search in Google Scholar

SATOH, H. – HARADA, Y. – LIBKE, S. 1998. Spherical particles for automotive powder coatings. In Progress in Organic Coatings, vol. 34, no. 1–4, pp. 193–199. DOI: https://doi.org/10.1016/S0300-9440(97)00116-1Search in Google Scholar

SCRINZI, E. – ROSSI, S. 2010. The aesthetic and functional properties of enamel coatings on steel. In Materials & Design, vol. 31, no. 9, pp. 4138–4146. DOI: https://doi.org/10.1016/j.matdes.2010.04.030Search in Google Scholar

SHAH, U. – ZHANG, C. – ZHU, J. 2006. Comparison of electrostatic fine powder coating and coarse powder coating by numerical simulations. In Journal of Electrostatics, vol. 64, no. 6, pp. 345–354. DOI: https://doi.org/10.1016/J.ELSTAT.2005.09.001Search in Google Scholar

TRABELSI, W. – TRIKI, E. – DHOUIBI, L. – FERREIRA, M. G. S. – ZHELUDKEVICH, M. L. – MONTEMOR, M. F. 2006. The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates. In Surface and Coatings Technology, vol. 200, no. 14–15, pp. 4240–4250. DOI: https://doi.org/10.1016/j.surfcoat.2005.01.044Search in Google Scholar

WITHY, B. – HYLAND, M. – JAMES, B. 2006. Pretreatment effects on the surface chemistry and morphology of aluminium. In International Journal of Modern Physics B, vol. 20, no. 25–27, pp. 3611–3616. DOI: https://doi.org/10.1142/S0217979206040076Search in Google Scholar

ZASTEMPOWSKI, M. – BOCHAT, A. 2020. Gyroscopic effect in machine working assemblies. In Acta Technologica Agriculturae, vol. 23, no. 1, pp. 24-29. DOI: https://doi.org/10.2478/ATA-2020-0005Search in Google Scholar