[
ARTOBOLEVSKY, I. I. 1988. Theory of Mechanisms and Machines. Moscow: Nauka Publ., 640 pp. ISBN 978–5020138100. (In Russian: Teoriya mehanizmov i mashin).
]Search in Google Scholar
[
CASOLI, P. – VACCA, A. – BERTA, G. L. 2008. Optimization of relevant design parameters of external gear pumps. In Proceedings of the 7th JFPS International Symposium on Fluid Power. Toyama, Japan, Sept. 15–18, 2008. ISBN 4-931070-07-X.10.5739/isfp.2008.277
]Search in Google Scholar
[
GAMEZ-MONTERO, P. J. – CASTILLA, R. – CODINA, E. 2018. Methodology based on best practice rules to design a newborn trochoidal gear pump. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 232, no. 6, pp. 1057–1068.
]Search in Google Scholar
[
HUANG, K. J. – CHEN, CH. 2008. Kinematic displacement optimization of external helical gear pumps. In Chung Hua Journal of Science and Engineering, vol. 6, no. 2, pp. 23–28.
]Search in Google Scholar
[
IVANOVIC, L. – DEVEDZIC, G. – CUKOVIC, S. – MIRIC, N. 2012. Modeling of the meshing of trochoidal profiles with clearances. In Journal of Mechanical Design, vol. 134, no. 4, pp. 041003-1–041003-9.
]Search in Google Scholar
[
KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62.
]Search in Google Scholar
[
KULESHKOV, Yu. V. – CHERNOVOL, M. I. – RUDENKO, T. V. – GUTSUL, V. I. – OSIN, R. A. 2010. Investigation of the behavior of mathematical model of the specific displacement of a gear pump of NSH type from the gearing parameters. In Agricultural Engineering, Industry Engineering, Automation. Collection of scientific works of Kirovohrad National Technical University 2010. Kirovohrad: Kirovohrad National Technical University, pp. 278–290. ISSN 2409–9392.
]Search in Google Scholar
[
KULESHKOV, Yu. V. – CHERNOVOL, M. I. – BEZ, O. V. – TITOV, Yu. A. 2009. Gear Pumps with Asymmetric Gearing Line. Theory, Design and Calculation. Monography. Kirovohrad: KOD, 243 pp. ISBN 978-966-1508-19-3.
]Search in Google Scholar
[
STRYCZEK, J. – BEDNARCZYK, S. – CODINA, E. – GAMEZ-MONTERO, P. J. – IVANOVIC, L. – MATEJIC, M. 2019. Gears or rotors – three approaches to design of working units of hydraulic machines. In IOP Conference Series: Materials Science and Engineering, vol. 959, pp. 1–13. ISSN 1757-8981.
]Search in Google Scholar
[
TKÁČ, Z. – ČORŇÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.
]Search in Google Scholar
[
TULÍK, J. – HUJO, Ľ. – KOSIBA, J. – JABLONICKÝ J. – JÁNOŠOVÁ, M. 2017. Evaluation of new biodegradable fluid on the basis of accelerated durability test, FTIR and ICP spectroscopy. In Research in Agricultural Engineering, vol. 63, no. 1, pp. 1–9.
]Search in Google Scholar
[
VACCA, A. – GUIDETTI, M. 2011. Modelling and experimental validation of external spur gear machines for fluid power applications. In Simulation Modelling Practice and Theory, vol. 19, no. 9, pp. 2007–2031.
]Search in Google Scholar
[
WANG, S. – SAKURAI, H.– KASAREKAR, A. 2011. The optimal design in external gear pump and motors. In IEEE/ASME Transactions on Mechatronics, vol. 16, no. 6, pp. 945–952.
]Search in Google Scholar
[
ZHOU, H. – DU, R. – XIE, A. – YANG, H. 2017. Investigations of the micro surface shape for the gear shaft/journal – bearing interface in water hydraulic internal gear pumps. In Advances in Mechanical Engineering, vol. 9, no. 11.
]Search in Google Scholar
