Three-dimensional (3D) printing technology represents a novel method for manufacturing aligners. The aim of the present study was to assess the in-vitro cytotoxicity of 3D-printed aligners using different post-polymerisation conditions.
Aligners were printed using the same 3D-print resin (TC-85DAC, Graphy, Seoul, Korea) and printer (AccuFab-L4D, Shining 3D Tech. Co., Hangzhou, China), followed by different post-curing procedures. Six aligners were post-polymerised for 14 min using the Tera Harz Cure and a nitrogen generator curing machine (THC2, Graphy, Seoul, Korea) (P1). A further six aligners were post-cured for 30 min on each side using the Form Cure machine (FormLabs Inc, Somerville, USA) (P2). The aligners were cut into smaller specimens (2 mm×2 mm) and sterilised at 121°C. The specimens were placed in 96-well plates containing Dulbecco’s Modified Eagle’s Medium (DMEM) at 37° for 7 or 14 days. The viability of MC3T3E-1 pre-osteoblasts cultured with DMEM was evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The optical density of each cell culture was measured to assess cell viability, following which the data were statistically analysed using two-way and one-way ANOVA (α = 0.05).
The comparison of cytotoxicity revealed statistically significant differences between post-curing procedures and MTT timings (
Different post-curing procedures may affect the in-vitro cytotoxicity of 3D-printed aligners. Clinicians should adhere to the manufacturer’s recommendations when using 3D-print resin.