<abstract xmlns="http://www.w3.org/1999/xhtml">
<p>The standardization and quantitative extraction of component information are accomplished by establishing an information model of ancient buildings. Based on BIM technology, i.e., model visualization, virtual simulation and BIM-related software, this paper combines the dimensional types of components to realize the parameterization settings of components and further designs the information structure of ancient building components. The standardization rate, repetition rate, repeatability coefficient, and standardization coefficient of the components were calculated by quantitative methods, followed by the determination of standardized components and the quantitative extraction of component attribute features based on the BIM model map. Based on the standardization of the information of the five-room, nine-purlin-hipped ancient building members based on BIM, the spatial location of the ancient building members was determined with the following parameters: bucket size 32.5 mm, eaves height 2180 mm, net height 1802.8 mm, and side legs 23.1 mm. BIM application provides a new way of thinking for archiving and protecting ancient architectural data.</p>
</abstract>

The standardization and quantitative extraction of component information are accomplished by establishing an information model of ancient buildings. Based on BIM technology, i.e., model visualization, virtual simulation and BIM-related software, this paper combines the dimensional types of components to realize the parameterization settings of components and further designs the information structure of ancient building components. The standardization rate, repetition rate, repeatability coefficient, and standardization coefficient of the components were calculated by quantitative methods, followed by the determination of standardized components and the quantitative extraction of component attribute features based on the BIM model map. Based on the standardization of the information of the five-room, nine-purlin-hipped ancient building members based on BIM, the spatial location of the ancient building members was determined with the following parameters: bucket size 32.5 mm, eaves height 2180 mm, net height 1802.8 mm, and side legs 23.1 mm. BIM application provides a new way of thinking for archiving and protecting ancient architectural data.

Research on standardization and quantitative extraction of information of ancient building components based on BIM

Department of Management, Chengyi College

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

The standardization and quantitative extraction of component information are accomplished by establishing an information model of ancient buildings. Based on...

Research on standardization and quantitative extraction of information of ancient building components based on BIM

Published Online: Sep 30, 2023

Page range: -

Received: Nov 23, 2022

Accepted: Apr 10, 2023

DOI: https://doi.org/10.2478/amns.2023.2.00401

Keywords
BIM technology, Ancient building components, Information standardization, Quantitative extraction, Parameterization settings.

© 2023 Hua Deng, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Research on standardization and quantitative extraction of information of ancient building components based on BIM

Published Online: Sep 30, 2023

Page range: -

Received: Nov 23, 2022

Accepted: Apr 10, 2023

DOI: https://doi.org/10.2478/amns.2023.2.00401

KeywordsBIM technology, Ancient building components, Information standardization, Quantitative extraction, Parameterization settings.

© 2023 Hua Deng, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Keywords
BIM technology, Ancient building components, Information standardization, Quantitative extraction, Parameterization settings.