<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>As the scale of the electrical system becomes more and more large and the structure becomes more and more complex, the performance of the electrical automation device is therefore required to be higher. This paper studies the electrical system automation device, and from the perspective of universality, designs and establishes the hardware platform of the electrical system automation device composed of six plug-ins, such as human-machine interface, auxiliary switch input, AC input, communication, power supply, and central processor. On this basis, μC/OS-II is adopted as the embedded real-time operating system of this paper to develop and design the software of the electrical system automation device. Then, the principle of the protection device for embedded system electrical automation is analyzed, and a microcomputer line protection device based on the full-circle Fuchs algorithm is proposed. The empirical analysis of the embedded system electrical automation device shows that the maximum system task response time is 145 μs and the minimum is 10 μs, which are all no more than 1 ms. When testing including the single board state, the keyboard, the alphabetical mode, the basic function, and the single board line module sending and receiving, the pass rate of all the testing items is more than 99%, which verifies that this paper is based on the embedded real-time operating system of the feasibility and effectiveness of the electrical automation device.</p>
</abstract>

As the scale of the electrical system becomes more and more large and the structure becomes more and more complex, the performance of the electrical automation device is therefore required to be higher. This paper studies the electrical system automation device, and from the perspective of universality, designs and establishes the hardware platform of the electrical system automation device composed of six plug-ins, such as human-machine interface, auxiliary switch input, AC input, communication, power supply, and central processor. On this basis, μC/OS-II is adopted as the embedded real-time operating system of this paper to develop and design the software of the electrical system automation device. Then, the principle of the protection device for embedded system electrical automation is analyzed, and a microcomputer line protection device based on the full-circle Fuchs algorithm is proposed. The empirical analysis of the embedded system electrical automation device shows that the maximum system task response time is 145 μs and the minimum is 10 μs, which are all no more than 1 ms. When testing including the single board state, the keyboard, the alphabetical mode, the basic function, and the single board line module sending and receiving, the pass rate of all the testing items is more than 99%, which verifies that this paper is based on the embedded real-time operating system of the feasibility and effectiveness of the electrical automation device.

Research on electrical automation devices under embedded real-time operating system design

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

As the scale of the electrical system becomes more and more large and the structure becomes more and more complex, the performance of the electrical automation...

Research on electrical automation devices under embedded real-time operating system design

Published Online: May 30, 2024

Page range: -

Received: Feb 21, 2024

Accepted: May 03, 2024

DOI: https://doi.org/10.2478/amns-2024-1265

Keywords
Embedded system, μC/OS-II, Full perimeter Fuchs algorithm, Automation device, Electrical system

© 2024 Yuxuan Liu, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Research on electrical automation devices under embedded real-time operating system design

Published Online: May 30, 2024

Page range: -

Received: Feb 21, 2024

Accepted: May 03, 2024

DOI: https://doi.org/10.2478/amns-2024-1265

KeywordsEmbedded system, μC/OS-II, Full perimeter Fuchs algorithm, Automation device, Electrical system

© 2024 Yuxuan Liu, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Keywords
Embedded system, μC/OS-II, Full perimeter Fuchs algorithm, Automation device, Electrical system