Study of Parameters of the Mixture and Heat Generation of the DD15 Diesel Engine of the Sandvik LH514 Loader in the Process of Using Alternative Fuels Based on RME

1 Naoto H, Tatsuya K, Yuji M, Takashi S, Hiroshi K, Ishiyama T. Analysis of Mixture Formation Process in a Diesel Engine with Post Injection. SAE technical paper series. 2015. https://doi.org/10.4271/2015-01-1836 Search in Google Scholar

2 O’Connor J, Musculus M. In-Cylinder Mechanisms of Soot Reduction by Close-Coupled Post-Injections as Revealed by Imaging of Soot Luminosity and Planar Laser-Induced Soot Incandescence in a Heavy-Duty Diesel Engine. SAE International Journal of Engines. 2014 Apr 1;7(2):673–93.DOI:10.4271/2014-01-1255 Search in Google Scholar

3 Hessel R, Reitz RD, Musculus M, O’Connor J, Flowers D. A CFD Study of Post Injection Influences on Soot Formation and Oxidation under Diesel-Like Operating Conditions. SAE International Journal of Engines. 2014 Apr 1;7(2):694–713. DOI:10.4271/2014-01-1256 Search in Google Scholar

4 O’Connor J, Musculus M. Effects of exhaust gas recirculation and load on soot in a heavy-duty optical diesel engine with close-coupled post injections for high-efficiency combustion phasing. International Journal of Engine Research. 2013 Jul 24;15(4):421–43. DOI:10.1177/1468087413488767 Search in Google Scholar

5 O’Connor J, Musculus M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding. SAE International Journal of Engines. 2013 Apr 8;6(1):400–21. DOI:10.4271/2013-01-0917 Search in Google Scholar

6 Naoto H, Tatsuya K, Takashi S, Wang H, Ishiyama T. Smoke Reduction Effects by Post Injection for Various Injection Parameters and Combustion Chamber Shapes in a Diesel Engine. SAE technical paper series. 2014 Oct 13. DOI:10.4271/2014-01-2634 Search in Google Scholar

7 Eismark J, Christensen M, Andersson M, Karlsson A, Denbratt I. Role of fuel properties and piston shape in influencing soot oxidation in heavy-duty low swirl diesel engine combustion. Fuel. 2019 Oct;254:115568. DOI: https://doi.org/10.1016/j.fuel.2019.05.151 Search in Google Scholar

8 Benajes J, García A, Monsalve-Serrano J, Lago Sari R. Fuel consumption and engine-out emissions estimations of a light-duty engine running in dual-mode RCCI/CDC with different fuels and driving cycles. Energy. 2018 Aug;157:19–30. DOI:10.1016/j.energy.2018.05.144 Search in Google Scholar

9 Rao L, Zhang Y, Kook S, Kim KS, Kweon CB. Morphology and internal structure of soot particles under the influence of jet–swirl and jet–jet interactions in a diesel combustion environment. Combustion and Flame. 2020 Apr;214:25–36. https://doi.org/10.1016/j.combustflame.2019.12.017 Search in Google Scholar

10 Millo F, Piano A, Roggio S, Pastor JV, Micó C, Lewiski F, et al. Mixture formation and combustion process analysis of an innovative diesel piston bowl design through the synergetic application of numerical and optical techniques. February 2022, Fuel, Volume 309. https://doi.org/10.1016/j.fuel.2021.122144 Search in Google Scholar

11 Hoang AT. Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel. Energy. 2019 Mar;171:795–808. https://doi.org/10.1016/j.energy.2019.01.076 Search in Google Scholar

12 Hoang AT. Waste heat recovery from diesel engines based on Organic Rankine Cycle. Applied Energy. 2018 Dec;231:138–66. https://doi.org/10.1016/j.apenergy.2018.09.022 Search in Google Scholar

13 Zareh P, Zare AA, Ghobadian B. Comparative assessment of performance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine. Energy. 2017 Nov;139:883–94. https://doi.org/10.1016/j.energy.2017.08.040 Search in Google Scholar

14 Rakopoulos DC, Rakopoulos CD, Giakoumis EG, Papagiannakis RG, Kyritsis DC. Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, nbutanol, diethyl ether. Energy. 2014 Aug;73:354–66. https://doi.org/10.1016/j.energy.2014.06.032 Search in Google Scholar

15 Mohamed Khaled Abdelrazek, Mohsen Mohamed Abdelaal, Ahmed Mustafa El-Nahas. Numerical simulation of a diesel engine performance powered by soybean biodiesel and diesel fuels. Beni-Suef University Journal of Basic and Applied Sciences. 2023 Jan 22;12(1). https://doi.org/10.1186/s43088-023-00349-w Search in Google Scholar

16 Jo H, Ishikawa T, Naoto Horibe, Hayashi J, Hiroshi Kawanabe, Ishiyama T. Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM. SAE International Journal of Advances and Current Practices in Mobility. 2020 Sep 15;3(1):276–86. https://doi.org/10.4271/2020-01-2058 Search in Google Scholar

17 Piano A, Roggio S, Millo F, García A, Micó C, Lewiski F, et al. Numerical and optical soot characterization through 2-color pyrometry technique for an innovative diesel piston bowl design. Fuel. 2023 Feb 1;333:126347–7. https://doi.org/10.1016/j.fuel.2022.126347 Search in Google Scholar

18 Jena A, Akhilendra Pratap Singh, Avinash Kumar Ágarwal. Optical and computational investigations of the effect of Spray-Swirl interactions on autoignition and soot formation in a compression ignition engine fuelled by Diesel, dieseline and diesohol. Applied Energy. 2022 Oct 1;324:119677–7. https://doi.org/10.1016/j.apenergy.2022.119677 Search in Google Scholar

19 Sevostyanov SM, Melnyk ME, Vakarenko SV. Research of intercommunication of serve of fuel and mixtureform with working process in diesels during work on partial modes. Modern problems and ways of their solution in science, transport, production and education. Sworld. 2012 Dec 18-27:48-53. Search in Google Scholar

20 Yang W, Li F, Ma F, Xu J. Numerical analysis of mixing and combustion characteristics of a lateral swirl combustion system in OP2S diesel engines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2022 Sep 16;095440702211218. https://doi.org/10.1177/09544070221121874 Search in Google Scholar

21 Neerav A, Nagar N, Zermeno R, Chiang M, Thomas I. Developing a 55% BTE Commercial Heavy-Duty Opposed-Piston Engine without a Waste Heat Recovery System. SAE technical paper series. 2017 Mar 28. https://doi.org/10.4271/2017-01-0638 Search in Google Scholar

22 Huo M, Huang Y, Hofbauer P. Piston Design Impact on the Scavenging and Combustion in an Opposed-Piston, Opposed-Cylinder (OPOC) Two-Stroke Engine. SAE technical paper series. 2015 Apr 14. https://doi.org/10.4271/2015-01-1269 Search in Google Scholar

23 Yamauchi J, Dong P, Nishida K, Ogata Y. Effects of Hole Diameter and Injection Pressure on Fuel Spray and Its Evaporation Characteristics of Multi-Hole Nozzle for Diesel Engine. 2017 Oct 8. DOI:10.4271/2017-01-2305 Search in Google Scholar

24 Fuyuto T, Hattori Y, Yamashita H, Toda N, Mashida M. Set-off length reduction by backward flow of hot burned gas surrounding high-pressure diesel spray flame from multi-hole nozzle. International Journal of Engine Research. 2016 Jul 28;18(3):173–94. DOI:10.1177/1468087416640429. Search in Google Scholar

25 Pastor J, Olmeda P, Javier Rodríguez Martín, Lewiski F. Methodology for Optical Engine Characterization by Means of the Combination of Experimental and Modeling Techniques. Applied sciences. 2018 Dec 11;8(12):2571–1. DOI:10.3390/app8122571 Search in Google Scholar

26 Bo Y, Liu F, Wu H, Li H, Shi Z. A numerical investigation of injection pressure effects on wall-impinging ignition at low-temperatures for heavy-duty diesel engine. Applied Thermal Engineering. 2021 Feb 1;184:116366–6. https://doi.org/10.1016/j.applthermaleng.2020.116366 Search in Google Scholar

27 Srinivasan R, Raja G, Nallusamy N, Raghu P. Experimental study of mixture formation in biodiesel spray with preheated fuel International Journal of Applied Engineering Research. 2015 Mar; 10;19; 13687-13691. Search in Google Scholar

28 Yin B, Ye Z, Jia H, Yu S, Deng WQ. Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions. Journal of Thermal Science. 2022 Jan 22;31(5):1565–74. https://doi.org/10.1007/s11630-022-1529-5 Search in Google Scholar

29 Raghu P, Nallusamy N, Spray characteristics of biodiesel fuel in constant volume chamber using multi-response optimization technique. Journal of Thermal Science, 2016, 25(6):581–588. Search in Google Scholar

30 Yu S, Yin B, Jia H, Wen S, Li X, Yu J. Theoretical and experimental comparison of internal flow and spray characteristics between diesel and biodiesel. Fuel. 2017 Nov 1;208:20–9. DOI:10.1016/j.fuel.2017.06.136 Search in Google Scholar

31 McCaffery C, Zhu H, Sabbir Ahmed CM, Canchola A, Chen JY, Li C, et al. Effects of hydrogenated vegetable oil (HVO) and HVO/biodiesel blends on the physicochemical and toxicological properties of emissions from an off-road heavy-duty diesel engine. Fuel. 2022 Sep;323:124283. https://doi.org/10.1016/j.fuel.2022.124283 Search in Google Scholar

32 Aatola H, Larmi M, Sarjovaara T, Mikkonen S. Hydrotreated Vegetable Oil (HVO) as a Renewable Diesel Fuel: Trade-off between NOx, Particulate Emission, and Fuel Consumption of a Heavy Duty Engine. SAE International Journal of Engines. 2008 Oct 6;1(1):1251–62. DOI:10.4271/2008-01-2500 Search in Google Scholar

33 Roque LFA, Berlini R, de Z, Coronado CJR, Pinto GM, Cintra AJA, et al. Experimental analysis and life cycle assessment of green diesel (HVO) in dual-fuel operation with bioethanol. 2023 Jan 1;389: 135989–9. https://doi.org/10.1016/j.jclepro.2023.135989 Search in Google Scholar

34 Jiménez Espadafor F, Torres García M, Becerra Villanueva J, More-no Gutiérrez J. The viability of pure vegetable oil as an alternative fuel for large ships. Transportation Research Part D: Transport and Environment. 2009 Oct;14(7):461–9. https://doi.org/10.1016/j.trd.2009.05.005 Search in Google Scholar

35 Chiaramonti D, Prussi M. Pure vegetable oil for energy and transport. International Journal of Oil, Gas and Coal Technology. 2009;2(2):186. DOI: 10.1504/IJOGCT.2009.024886 Search in Google Scholar