Semi-Analytical Analysis of a Rigid Rotor Mounted on Four-Pad Hydrostatic Squeeze Film Damper with Single-Action Membrane-Type Restrictors

1 Bouzidane A, Thomas M. Equivalent Stiffness and damping investigation of a hydrostatic journal bearing. Tribology transactions. 2007; 50 (2), 257-267. https://doi.org/10.1080/10402000701309745 Search in Google Scholar

2 Bouzidane A, Thomas M, Lakis A. Non linear dynamic behaviour of a rigid rotor supported by hydrostatic squeeze film dampers. Journal of tribology transactions of the ASME,2008; 130 (4), 041102-041102-9. https://doi.org/10.1080/10402000701309745 Search in Google Scholar

3 Abed A, Bouzidane A, Thomas M, Zahloul H. Performance characteristics of a three-pad hydrostatic squeeze film damper compensated with new electrorheological valve restrictors. Proc imeche, part j: j engineering tribology. 2017; 231, 889–899. https://doi.org/10.1177/1350650116683622 Search in Google Scholar

4 Nemchi A, Bouzidane A, Thomas M, Abed A. Performance analysis of four-pad hydrostatic squeeze film dampers loaded between pads under laminar and turbulent flow conditions. Tribol mater. 2018; surf inter, 12, 59-70. https://doi.org/10.1080/17515831.2018.1441789 Search in Google Scholar

5 Benariba A, Bouzidane A, Thomas M, Raynald G. Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant. Proc imeche, part j: journal of engineering tribology. 2018; 232, 513–524. https://doi.org/10.1177/1350650117721119 Search in Google Scholar

6 Benariba A, Bouzidane A, Thomas A. Analytical analysis of a rigid rotor mounted on three hydrostatic pads lubricated with micropolar fluids. Proceedings of the institution of mechanical engineers, part j: journal of engineering tribology. 2018; 0(0),1-11. https://doi.org/10.1177/135065011880637 Search in Google Scholar

7 Mayer JE, Shaw MC. Characteristics of externally pressurized bearing having variable external flow restrictors. ASME journal of basic engineering.1963; 85, 291. https://doi.org/10.1115/1.365657 Search in Google Scholar

8 DeGast JGC. A new type of controlled restrictor (M.D.R.) for double film hydrostatic bearings and its application to high-precision machine tools. Advances in machine tool design and research, In: Proceedings of the 7th international M.T.D.R. conference, Birmingham. 1966; 12–16, 273–298. https://doi.org/10.1115/1.2920582 Search in Google Scholar

9 Rowe WB, O’donoghue JP. Diaphragm valves for controlling opposed pad hydrostatic bearings. Engineer’s Digest.1969; 30(4), 49. Search in Google Scholar

10 Cusano C. Characteristics of externally pressurized journal bearing with membrane-type variable-flow restrictors as compensating elements. Inst, of Mechanical Engineers, London. 1974;188(52),527. https://doi.org/10.1243/PIME_PROC_1974_188_064_02 Search in Google Scholar

11 Mohsin ME. The use of controlled restrictors for compensating hydrostatic bearings. Proceedings of the third international machine tool design research conference University of Birmingham. 1963; 429–42. Search in Google Scholar

12 Morsi SA. Passively and actively controlled externally pressurized oil-film bearings. Trans ASME. 1972; 56–63. https://doi.org/10.1115/1.3451635 Search in Google Scholar

13 Mohsin ME, Morsi SA. The dynamic stiffness of controlled hydrostatic bearings. Trans ASME J Lub Tech.1969; 597–608. https://doi.org/10.1115/1.3555006 Search in Google Scholar

14 Degast JGC. A new type of controlled restrictor M.D.R for double film hydrostatic bearings and its application to high-precision machine tools. In: Advances in machine tool design and research, Oxford:Pergamon Press. 1966; 273–98. Search in Google Scholar

15 Wang C, Cusano C. Dynamic characteristics of externally pressurized, double-pad, circular thrust bearings with membrane restrictors, ASME J Trib.1991; 113,158–65. https://doi.org/10.1115/1.2920582 Search in Google Scholar

16 Sharma SC, Sinhasan R, Jain SC. Performance characteristics of multirecess hydrostatic hybrid flexible journal bearing with membrane type variable-flow restrictor as compensating elements. Wear. 1992; 152,279–300. https://doi.org/10.1016/0043-1648(92)90126-S Search in Google Scholar

17 Singh N, Sharma S C, Jain S C, Reddy S S. Performance of membrane compensated multirecess hydrostatic/hybrid flexible journal bearing system considering various recesses shapes. Tribol Int. 2004; 37, 11–24. https://doi.org/10.1016/S0301-679X(03)00110-5 Search in Google Scholar

18 Kang Y, Shen PC, Chang YP, Lee HH. Modified determination of fluid resistance for membrane-type restrictor. Industrial Lubrication and Tribology. 2007; 59(3),123-31. https://doi.org/10.1108/00368790710746084 Search in Google Scholar

19 Kang Y, Shen PC, Chang YP, Chiang CP. Modified predictions of restriction coefficient and flow resistance for membrane-type restrictors in hydrostatic bearing by using regression. Tribology International. 2007; 40(9),1369-80. https://doi.org/10.1016/j.triboint.2007.03.002 Search in Google Scholar

20 Kang Y, Chen CH, Lee HH, Hung YH, Hsiao ST. Design for static stiffness of hydrostatic bearings: single-action variable compensations. Industrial Lubrication and Tribology. 2011; 63 (2),103-18. https://doi.org/10.1108/00368791111112225 Search in Google Scholar

21 Kang Y, Chen CH, Chen YC, Chang C. Hsiao ST. Parameter identification for single-action membrane-type restrictors of hydrostatic bearings, Industrial Lubrication and Tribology. 2012;64(1),39-53. https://doi.org/10.1108/00368791211196880 Search in Google Scholar