<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Increasing machining accuracy realized on CNC machine tools causes that the more frequently surfaces machined with this technique are not subject to further finishing processing and directly affects on the final quality of the product. Achieving geometric accuracy established by the constructor is the problem that modern technologists and CAD/CAM programmers have to faced with. The paper presents the influence of toolpath tolerance and machining strategy available in CAD/CAM software on the constituting process of technological surface layer for elements limited with curvilinear surfaces. The impact of the above mentioned parameters on the location and direction of geometrical deviations were also analyzed. Following article is part of research of the impact of selected technological parameters on the freeform surfaces geometric structure manufactured on CNC machines</p></abstract>

Increasing machining accuracy realized on CNC machine tools causes that the more frequently surfaces machined with this technique are not subject to further finishing processing and directly affects on the final quality of the product. Achieving geometric accuracy established by the constructor is the problem that modern technologists and CAD/CAM programmers have to faced with. The paper presents the influence of toolpath tolerance and machining strategy available in CAD/CAM software on the constituting process of technological surface layer for elements limited with curvilinear surfaces. The impact of the above mentioned parameters on the location and direction of geometrical deviations were also analyzed. Following article is part of research of the impact of selected technological parameters on the freeform surfaces geometric structure manufactured on CNC machines

SELECTION OF OPTIMAL MACHINING STRATEGY IN THE MANUFACTURE OF ELEMENTS BOUNDED BY CURVILINEAR SURFACES

Department of Production Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Bialystok, Poland

Acta Mechanica et Automatica

Increasing machining accuracy realized on CNC machine tools causes that the more frequently surfaces machined with this technique are not subject to further...

SELECTION OF OPTIMAL MACHINING STRATEGY IN THE MANUFACTURE OF ELEMENTS BOUNDED BY CURVILINEAR SURFACES

Published Online: Jan 22, 2014

Page range: 5 - 10

DOI: https://doi.org/10.2478/ama-2013-0001

This content is open access.