Influence of fused deposition modelling printing parameters on tablet disintegration times: a design of experiments study

1A. Samaro, P. Janssens, V. Vanhoorne, J. van Renterghem, M. Eeckhout, L. Cardon, T. de Beer and C. Vervaet, Screening of pharmaceutical polymers for extrusion-based additive manufacturing of patient-tailored tablets, Int. J. Pharm. 586 (2020) 1–11; https://doi.org/10.1016/j.ijpharm.2020.119591Search in Google Scholar

2J. Zhang, X. Feng, H. Patil, R. V. Tiwari and M. A. Repka, Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets, Int. J. Pharm. 519(1-2) (2017) 186–197; https://doi.org/10.1016/j.ijpharm.2016.12.049Search in Google Scholar

3N. G. Solanki, M. Tahsin, A. V. Shah and A. T. M. Serajuddin, Formulation of 3D printed tablet for rapid drug release by fused deposition modeling: Screening polymers for drug release, drug-polymer miscibility and printability, J. Pharm. Sci. 107(1) (2018) 390–401; https://doi.org/10.1016/j.xphs.2017.10.021Search in Google Scholar

4A. Melocchi, F. Parietti, A. Maroni, A. Foppoli, A. Gazzaniga and L. Zema, Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling, Int. J. Pharm. 509(1-2) (2016) 255–263; https://doi.org/10.1016/j.ijpharm.2016.05.036Search in Google Scholar

5E. Fuenmayor, M. Forde, A. V. Healy, D. M. Devine, J. G. Lyons, C. McConville and I. Major, Material considerations for fused-filament fabrication of solid dosage forms, Pharmaceutics 10(2) (2018) 1–27; https://doi.org/10.3390/pharmaceutics10020044Search in Google Scholar

6K. Ilyés, N. K. Kovács, A. Balogh, E. Borbás, B. Farkas, T. Casian, G. Marosi, I. Tomuță and Z. K. Nagy, The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations–printability–process modulation, with consecutive effects on in vitro release, stability and degradation, Eur. J. Pharm. Sci. 129(1) (2019) 110–123; https://doi.org/10.1016/j.ejps.2018.12.019Search in Google Scholar

7J. Aho, J. P. Bøtker, N. Genina, M. Edinger, L. Arnfast and J. Rantanen, Roadmap to 3D-printed oral pharmaceutical dosage forms: Feedstock filament properties and characterization for fused deposition modeling, J. Pharm. Sci. 108(1) (2019) 26–35; https://doi.org/10.1016/j.xphs.2018.11.012Search in Google Scholar

8C. Korte and J. Quodbach, 3D-printed network structures as controlled-release drug delivery systems: Dose adjustment, API release analysis and prediction, AAPS PharmSciTech. 19(8) (2018) 3333–3342; https://doi.org/10.1208/s12249-018-1017-0Search in Google Scholar

9Q. Li, H. Wen, D. Jia, X. Guan, H. Pan, Y. Yang, S. Yu, Z. Zhu, R. Xiang and W. Pan, Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing, Int. J. Pharm. 525(1) (2017) 5–11; https://doi.org/10.1016/j.ijpharm.2017.03.066Search in Google Scholar

10C. I. Gioumouxouzis, A. Baklavaridis, O. L. Katsamenis, C. K. Markopoulou, N. Bouropoulos, D. Tzetzis and D. G. Fatouros, A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery, Eur. J. Pharm. Sci. 120 (2018) 40–52; https://doi.org/10.1016/j.ejps.2018.04.020Search in Google Scholar

11B. Arafat, M. Wojsz, A. Isreb, R. T. Forbes, M. Isreb, W. Ahmed, T. Arafat and M. A. Alhnan, Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets, Eur. J. Pharm. Sci. 118 (2018) 191–199; https://doi.org/10.1016/j.ejps.2018.03.019Search in Google Scholar

12A. Goyanes, P. Robles Martinez, A. Buanz, A. W. Basit and S. Gaisford, Effect of geometry on drug release from 3D printed tablets, Int. J. Pharm. 494(2) (2015) 657–663; https://doi.org/10.1016/j.ijpharm.2015.04.069Search in Google Scholar

13D. Chen, X. Y. Xu, R. Li, G. A. Zang, Y. Zhang, M. R. Wang, M. F. Xiong, J. R. Xu, T. Wang, H. Fu, Q. Hu, B. Wu, G. R. Yan and T. Y. Fan, Preparation and in vitro evaluation of FDM 3D-printed ellipsoid-shaped gastric floating tablets with low infill percentages, AAPS PharmSciTech. 21(1) (2020) 1–13; https://doi.org/10.1208/s12249-019-1521-xSearch in Google Scholar

14F. Baumann, H. Bugdayci, J. Grunert, F. Keller and D. Roller, Influence of slicing tools on quality of 3D printed parts, Comput. Aided Des. Appl. 13(1) (2016) 14–31; https://doi.org/10.1080/16864360.2015.1059184Search in Google Scholar

15T. Feuerbach, S. Kock and M. Thommes, Slicing parameter optimization for 3D printing of bio-degradable drug-eluting tracheal stents, Pharm. Dev. Technol. 25(6) (2020) 650–658; https://doi.org/10.1080/10837450.2020.1727921Search in Google Scholar

16T. Feuerbach, S. Kock and M. Thommes, Characterisation of fused deposition modeling 3D printers for pharmaceutical and medical applications, Pharm. Dev. Technol. 23(10) (2018) 1136–1145; https://doi.org/10.1080/10837450.2018.1492618Search in Google Scholar

17J. Go, S. N. Schiffres, A. G. Stevens and A. J. Hart, Rate limits of additive manufacturing by fused filament fabrication and guidelines for high-throughput system design, Addit. Manuf. 16 (2017) 1–11; https://doi.org/10.1016/j.addma.2017.03.007Search in Google Scholar

18R. Jerez-Mesa, G. Gomez-Gras, J. A. Travieso-Rodriguez and V. Garcia-Plana, A comparative study of the thermal behavior of three different 3D printer liquefiers, Mechatronics 56 (2018) 297–305; https://doi.org/10.1016/j.mechatronics.2017.06.008Search in Google Scholar

19G. Verstraete, A. Samaro, W. Grymonpré, V. Vanhoorne, B. van Snick, M. N. Boone, T. Hellemans, L. van Hoorebeke, J. P. Remon and C. Vervaet, 3D printing of high drug loaded dosage forms using thermoplastic polyurethanes, Int. J. Pharm. 536(1) (2018) 318–325; https://doi.org/10.1016/j.ijpharm.2017.12.002Search in Google Scholar

20S. Palekar, P. K. Nukala, S. M. Mishra, T. Kipping and K. Patel, Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen, Int. J. Pharm. 556 (2019) 106–116; https://doi.org/10.1016/j.ijpharm.2018.11.062Search in Google Scholar

21E. Fuenmayor, M. Forde, A. V. Healy, D. M. Devine, J. G. Lyons, C. McConville and I. Major, Comparison of fused-filament fabrication to direct compression and injection molding in the manufacture of oral tablets, Int. J. Pharm. 558 (2019) 328–340; https://doi.org/10.1016/j.ijpharm.2019.01.013Search in Google Scholar

22A. Goyanes, F. Fina, A. Martorana, D. Sedough, S. Gaisford and A. W. Basit, Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing, Int. J. Pharm. 527(1-2) (2017) 21–30; https://doi.org/10.1016/j.ijpharm.2017.05.021Search in Google Scholar

23Y. Yang, H. Wang, H. Li, Z. Ou and G. Yang, 3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release, Eur. J. Pharm. Sci. 115 (2018) 11–18; https://doi.org/10.1016/j.ejps.2018.01.005Search in Google Scholar

24H. Kadry, T. A. Al-Hilal, A. Keshavarz, F. Alam, C. Xu, A. Joy and F. Ahsan, Multi-purposable fila ments of HPMC for 3D printing of medications with tailored drug release and timed-absorption, Int. J. Pharm. 544(1) (2018) 285–296; https://doi.org/10.1016/j.ijpharm.2018.04.010Search in Google Scholar

25P. K. Nukala, S. Palekar, N. Solanki, Y. Fu, M. Patki, A. A. Shohatee, L. Trombetta and K. Patel, Investigating the application of FDM 3D printing pattern in preparation of patient-tailored dosage forms, 3D Print. Med. 3(1) (2019) 23–37; https://doi.org/10.2217/3dp-2018-0028Search in Google Scholar

26K. Pietrzak, A. Isreb and M. A. Alhnan, A flexible-dose dispenser for immediate and extended release 3D printed tablets, Eur. J. Pharm. Biopharm. 96 (2015) 380–387; https://doi.org/10.1016/j.ejpb.2015.07.027Search in Google Scholar

27E. Carlier, S. Marquette, C. Peerboom, L. Denis, S. Benali, J. M. Raquez, K. Amighi and J. Goole, Investigation of the parameters used in fused deposition modeling of poly(lactic acid) to optimize 3D printing sessions, Int. J. Pharm. 565 (2019) 367–377; https://doi.org/10.1016/j.ijpharm.2019.05.008Search in Google Scholar

28Y. Joo, I. Shin, G. Ham, S. M. Abuzar, S. M. Hyun and S. J. Hwang, The advent of a novel manufacturing technology in pharmaceutics: superiority of fused deposition modeling 3D printer, J. Pharm. Investig. 50 (2020) 131–145; https://doi.org/10.1007/s40005-019-00451-1 Search in Google Scholar

29M. Alhijjaj, J. Nasereddin, P. Belton and S. Qi, Impact of processing parameters on the quality of pharmaceutical solid dosage forms produced by fused deposition modeling (FDM), Pharmaceutics 11(12) (2019) 1–21; https://doi.org/10.3390/pharmaceutics11120633Search in Google Scholar

30J. Zhang, W. Yang, A. Q. Vo, X. Feng, X. Ye, D. W. Kim and M. A. Repka, Hydroxypropyl methyl-cellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation, Carbohydr. Polym. 177 (2017) 49–57; https://doi.org/10.1016/j.carbpol.2017.08.058Search in Google Scholar

31M. Tidau, A. Kwade and J. H. Finke, Influence of high, disperse api load on properties along the fused-layer modeling process chain of solid dosage forms, Pharmaceutics 11(4) (2019) 1–17; https://doi.org/10.3390/pharmaceutics11040194Search in Google Scholar

32W. Kempin, V. Domsta, G. Grathoff, I. Brecht, B. Semmling, S. Tillmann, W. Weitschies and A. Seidlitz, Immediate release 3D-printed tablets produced via fused deposition modeling of a thermo-sensitive Drug, Pharm. Res. 35(6) (2018) 1–12; https://doi.org/10.1007/s11095-018-2405-6Search in Google Scholar

33C. Wei, N. G. Solanki, J. M. Vasoya, A. V. Shah and A. T. M. Serajuddin, Development of 3D printed tablets by fused deposition modeling using polyvinyl alcohol as polymeric matrix for rapid drug release, J. Pharm. Sci. 109(4) (2020) 1558–1572; https://doi.org/10.1016/j.xphs.2020.01.015Search in Google Scholar

34D. K. Tan, M. Maniruzzaman and A. Nokhodchi, Advanced pharmaceutical applications of hot-melt extrusion coupled with fused deposition modelling (FDM) 3D printing for personalised drug delivery, Pharmaceutics 10(4) (2018) 1–23; 10.3390/pharmaceutics10040203Search in Google Scholar