<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The selection of appropriate technological processes for water treatment has a key impact on the qualitative safety of water intended for human consumption. The article analyzes water treatment processes used in a selected Water Treatment Plant (WTP) in terms of surface and ground water treatment. Five-year results of the research are presented on selected physico-chemical and bacteriological parameters of water quality before treatment processes, after individual stages of treatment (settling tanks, DynaSand® filters, ozonation, carbon filters, UV rays and chlorine gas disinfection). The reduction of key pollutants at individual stages of technological processes was calculated. The results of the analyzes demonstrated that the technological processes used in WTP effectively remove turbidity, color, UVA<sub>254nm</sub>, permanganatate oxygen demand, Fetotal, Mn, <italic>coliform bacteria</italic>, <italic>Enterococcus faecalis</italic> and <italic>Clostridium Perfringens</italic> from the surface and underground water. Studies have shown that infiltration in the ground effectively removes selected pollutants from water and its effectiveness is comparable to high-efficiency treatment processes.</p>
</abstract>

The selection of appropriate technological processes for water treatment has a key impact on the qualitative safety of water intended for human consumption. The article analyzes water treatment processes used in a selected Water Treatment Plant (WTP) in terms of surface and ground water treatment. Five-year results of the research are presented on selected physico-chemical and bacteriological parameters of water quality before treatment processes, after individual stages of treatment (settling tanks, DynaSand® filters, ozonation, carbon filters, UV rays and chlorine gas disinfection). The reduction of key pollutants at individual stages of technological processes was calculated. The results of the analyzes demonstrated that the technological processes used in WTP effectively remove turbidity, color, UVA254nm, permanganatate oxygen demand, Fetotal, Mn, coliform bacteria, Enterococcus faecalis and Clostridium Perfringens from the surface and underground water. Studies have shown that infiltration in the ground effectively removes selected pollutants from water and its effectiveness is comparable to high-efficiency treatment processes.

The Role of Selected Technological Processes in Drinking Water Treatment

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"The Role of Selected Technological Processes in Drinking Water Treatment"}

The selection of appropriate technological processes for water treatment has a key impact on the qualitative safety of water intended for human consumption....

The Role of Selected Technological Processes in Drinking Water Treatment

Published Online: Jul 20, 2023

Page range: 189 - 200

Received: Mar 28, 2023

Accepted: May 10, 2023

DOI: https://doi.org/10.2478/acee-2023-0028

Keywords
Water technology, Water treatment processes, DynaSand® and carbon filters, Ozonation, Disinfection

© 2023 Iwona Wiewiórska, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Role of Selected Technological Processes in Drinking Water Treatment

Published Online: Jul 20, 2023

Page range: 189 - 200

Received: Mar 28, 2023

Accepted: May 10, 2023

DOI: https://doi.org/10.2478/acee-2023-0028

KeywordsWater technology, Water treatment processes, DynaSand® and carbon filters, Ozonation, Disinfection

© 2023 Iwona Wiewiórska, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
Water technology, Water treatment processes, DynaSand® and carbon filters, Ozonation, Disinfection