This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The soil, climate, and well-developed irrigation system in the southern region of the province make Alberta one of the most productive places in Canada to grow potatoes, with 20.4% of the country’s total yield reported in 2019 (Statistics Canada, 2020). Alberta also hosts the world’s leading potato processors. Planted areas and crop yields in this province have been increasing steadily to meet the growing demand for potato products. However, disease incidence remains a major limiting factor in profitable potato production. Among the major potato diseases, the potato early dying (PED) complex results in premature plant senescence and can decrease potato marketable yield by as much as 50% (Row and Powelson, 2002). The root-lesion nematode Pratylenchus penetrans is a known contributor to PED, along with the fungal wilt pathogen Verticillium dahliae and to a lesser extent V. albo-atrum. The possible role of other plant-parasitic nematodes in PED development is unknown, although several studies noted the co-occurrence of stunt nematodes and root-lesion nematodes (Smiley et al., 2004; Thompson et al., 2008).
Stunt nematodes are ectoparasites, polyphagous in nature and commonly found in vegetable fields, grasslands, and forest soils. The plant damage caused by these nematodes is difficult to detect; indeed, the impact is a challenge to ascertain as these nematodes either feed directly or potentiate the disease complexes formed by other plant pathogens (Singh et al., 2013). Previous studies detected the presence of 15 stunt nematode species from Canada (Geraert, 2011); however, the recent records only indicate the genus level identification (Pereira, 2018; Wallace, 2016), revealing a gap in our understanding of stunt nematodes inhabiting Canadian soils.
In the present study, two stunt nematode species belonging to the genera Geocenamus and Quinisulcius were detected in the potato growing regions of southern Alberta, with the latter species being the first record in Canada. Both species were examined morphologically and identified as Geocenamus brevidens and Quinisulcius capitatus. Because both of these are considered plant-parasitic species in other countries (Smiley et al., 2006; Thompson et al., 2008), the aim of the present study was to (i) provide a detailed molecular and morphometric characterization of both species, (ii) provide extensive information on the species distribution and host associations, and (iii) study the phylogenetic relationship of G. brevidens and Q. capitatus with other stunt nematode species. The results of this study will lay the foundation for assessing the damage potential of these species on potato production so as to benefit growers and researchers involved in nematode management programs.
Materials and methods
Nematode isolation and morphological studies
Nematodes were isolated from soil samples using the modified Cobb sieving and flotation-centrifugation method (Jenkins, 1964). For morphometric studies, nematodes were killed and fixed in hot formalin (4% formaldehyde), processed by ethanol-glycerin dehydration, as described by Seinhorst (1959) and modified by De Grisse (1969), and mounted on permanent slides. Measurements of the mounted specimens were taken using light micrographs prepared on a Zeiss Axioskope 40 microscope equipped with a Zeiss Axiocam 208 camera (Carl Zeiss Microscopy, Jena, Germany).
DNA extraction, PCR amplification, and sequencing
DNA samples were prepared from nematodes according to Maria et al. (2018). Three sets of DNA primers (Integrated DNA Technologies, Coralville, IA, USA) were used in the PCR analyses to amplify nucleotide sequences of the partial 18S, 28S (LSU), and ITS of ribosomal RNA genes (rDNA). The partial 18S region was amplified with 1813F and 2646R primers (Holterman et al., 2006). The LSU rDNA regions were amplified using 28–81for and 28–1006rev primers (Holterman et al., 2008), and the ITS was amplified with the F194 (Ferris et al., 1993) and AB28-R primers (Curran et al., 1994). PCR conditions were as described by Holterman et al. (2006, 2008) and Ferris et al. (1993). PCR products were resolved in 1% agarose gels and visualized by staining with GelRed (Biotium, Fremont, CA, USA). Amplified DNA fragments were purified following the manufacturer’s protocol (Omega Biotek, Norcross, GA, USA), ligated into the pJET1.2 vector (Thermo Fisher Scientific, Mississauga, ON, Canada), and introduced into Escherichia coli DH5α-competent cells (Thermo Fisher Scientific). The presence of the insert-containing plasmids in transformed E. coli cells was confirmed by PCR. Plasmid DNA was isolated and purified according to the manufacturer’s instructions (Omega Biotek). The DNA inserts were sequenced at Genewiz, Inc (South Plainfield, NJ, USA) using primers matching the flanking vector sequence.
Phylogenetic analyses
Sequenced genetic markers from the nematodes examined in the present study (after discarding primer sequences and ambiguously aligned regions), along with several stunt nematode sequences obtained from the GenBank database, were used in the phylogenetic reconstruction. Outgroup taxa for each dataset were selected based on previously published studies (Handoo et al., 2014; Maria et al., 2020; Nguyen et al., 2019). Multiple-sequence alignments of the newly obtained and published sequences were made using the FFT-NS-2 algorithm of MAFFT V.7.450 (Katoh et al., 2019). Sequence alignments were visualized with BioEdit (Hall, 1999) and manually edited by Gblocks ver. 0.91b (Castresana, 2000) in the Castresana Laboratory server (http://molevol.cmima.csic.es/castresana/Gblocks_server.html) using options for a less stringent selection (minimum number of sequences for a conserved or a flanking position: 50% of the number of sequences +1; maximum number of contiguous nonconserved positions: 8; minimum length of a block: 5; allowed gap positions: with half).
Phylogenetic analyses of the sequence datasets were conducted based on Bayesian inference (BI) using MRBAYES 3.2.7a (Ronquist and Huelsenbeck, 2003). The best-fit model of DNA evolution was calculated with the Akaike information (AIC) of JMODELTEST V.2.1.7 (Darriba et al., 2012). The best-fit model, the base frequency, the proportion of invariable sites, substitution rates, and the gamma distribution shape parameters in the AIC were used for phylogenetic analyses. BI analyses were performed under a general time-reversible model, with a proportion of invariable sites and a rate of variation across sites (GTR + I + G) for the partial 18S, 28S, and ITS rRNA regions. These BI analyses were run separately per dataset with four chains for 2 × 106 generations. The Markov chains were sampled at intervals of 100 generations. Two runs were conducted for each analysis. After discarding burn-in samples of 10% and evaluating convergence, the remaining samples were retained for more in-depth analyses. The topologies were used to generate a 50% majority-rule consensus tree. Posterior probabilities (PP) are given on appropriate clades. Trees from all analyses were edited using FigTree software V.1.4.4 (http://tree.bio.ed.ac.uk/software/figtree/).
Notes: All measurements are in µm and in the form: mean ± standard deviation (range). aOriginal description.
Description
Female
Body straight with curved tail region or open C-shaped. The cuticle annulated, lateral field with six incisures. Cephalic region continuous, broadly rounded with 3 to 4 indistinct annuli, basal ring of head framework shallow, distinctively arched. Stylet 15 to 17 µm long with rounded basal knobs. Dorsal gland opening (DGO) 1.5 to 3.0 µm posterior to basal knobs. Median bulb spherical to oval, well-developed, central valve plates bean-shaped slightly anteriorly. Isthmus slender encircled with nerve ring. Deirids were present (observed in few specimens). Excretory pore anterior to the basal esophageal bulb. Hemizonid 2 to 3 body annuli long situated slightly anterior to the excretory pore. Cardia rounded, intestine densely globular. Ovaries outstretched, vulva with small epiptygma, which mostly appear as protruding lips, vagina inclined anteriorly covering half of the corresponding body diameter. Spermatheca rounded, scarcely filled with sperm. Tail subcylindrical, gradually tapering to a smooth broadly rounded or truncated terminus. Hyaline region of tail prominent 3.2–5.5 µm long. Phasmids near or slightly posterior to mid-tail.
Male
Not found.
Remarks
Geocenamus brevidens (=Tylenchorhynchus brevidens, Allen, 1955 and Merlinius brevidens, Siddiqi, 1970) was originally described in the rhizosphere of grass from the USA by Allen in 1955. Since then, this species has been reported from diverse climate regions and agricultural environments (Table 3). Despite its wide distribution, few morphometrical studies are available for comparison (Table 1). Geocenamus brevidens was also reported from potato fields in Ontario (Olthof et al., 1982), although no morphological and morphometric studies were presented. Hence, we consider our population of G. brevidens as a Canadian population. We observed that nematodes of the Canadian population of G. brevidens were slightly longer and wider than in the original and other reported descriptions, with the exception of those from India (Siddiqi, 1961). The Canadian population morphometrical values were in good agreement with the Indian population, except for the stylet length, which was longer in the Canadian population, 15.0 to 17.5 vs 13.0 to 15.0 µm. The other morphological characteristics, i.e., lip and tail morphology, overall body habitus, and vulva appearance, were consistent with the original description. Males were described in the original description and by Siddiqi (1961), but in later reports, no males were ever detected. Geraert (2011) mentioned that males were uncommon in G. brevidens; the Canadian population was also found devoid of males. In the original and subsequent descriptions, the authors did not observe the presence of spermatheca in G. brevidens (Allen, 1955; Alvani et al., 2017; Tzortzakakis et al., 2018). On the other hand, round-shaped spermathecae were found in the Canadian and Indian populations. The other characteristics noted by Siddiqi (1961) in the Indian population were tightly closed stylet knobs, indistinct anus, and rather cylindrical tail. In the Canadian population, the anus was prominent, stylet knobs were rounded, and the tail was cylindrical with a broadly rounded, somewhat truncated terminus. We consider these small differences between G. brevidens populations to be due to intraspecific geographic variation.
Two G. brevidens populations were found in the present study. The first population was found in a potato field (latitude 50° 34′ 43″ N; longitude – 112° 30′ 34.7″ W) of Vulcan county, whereas the second one was discovered in the rhizosphere of grass growing on the headland (uncultivated field margin) (latitude 49° 47′ 22.66″ N; longitude – 112° 13′ 23″ W) of Taber Rural Municipality, Alberta, Canada.
Body open C-shaped, appeared concave at vulval level. Cuticle annulated, lateral field with five incisures. Cephalic region continuous with slight depression at the junction of lip and body, broadly rounded with a few indistinct lip annuli. Stylet robust, 15 to 20 µm long with rounded basal knobs. DGO 2.5 to 4.0 µm posterior to basal knobs. Median bulb rounded, well developed with conspicuous central valve plates. Isthmus slender, encircled with nerve ring. Deirids not seen. Excretory pore at the middle of basal esophageal bulb. Hemizonid inconspicuous, 2 to 3 body annuli long, situated 3 to 4 annuli anterior to excretory pore. Cardia rounded, intestine densely globular. Ovaries outstretched, vulva with protruding lips, vagina straight covering more than half of the corresponding body diameter. Spermatheca weakly developed, rounded. Tail conoid, distinctly annulated, gradually tapering to a heart or V-shaped terminus. Phasmids near or slightly posterior to mid-tail.
Male
Not found.
Remarks
Quinisulcius capitatus (=Tylenchorhynchus capitatus (Allen, 1955) Siddiqi, 1971) was originally described in the rhizosphere of pear from the USA by Allen in 1955. Afterward, this species has been found in various geographic and agricultural locations (Table 3). In the present study, the nematodes of the Canadian population of Q. capitatus were slightly longer and wider than those described in the original and other reports. Because of the longer body, the Canadian population had a longer stylet and tail, whereas the other morphological characteristics, such as lip and tail morphology, indistinct hemizonid, weakly developed spermatheca and vulva appearance, corresponded well with the original description. Male (n = 4) was only described in Allen (1955); however, no males were detected in any other reported population (Hopper, 1959; Knobloch and Laughlin, 1973; Maqbool, 1982; Mekete et al., 2008; Siddiqi, 1961). Similarly, no male was found in the Canadian population. Of 17 valid species of Quinisulcius, males were not described for 10 species (Geraert, 2011). We speculate that males of Quinisulcius are either very rare or do not have a significant role in reproduction. Another species, Q. acti, was described from the rhizosphere of okra by Hopper in 1959; however, this species was soon synonymized with Q. capitatus (Siddiqi, 1961). Knobloch and Laughlin (1973) emphasized the number of tail annuli and the lateral line incisures characteristics at the phasmid level to reinstate the species Q. acti. However, this action was not accepted, and the species was regarded as synonym of Q. capitatus (Geraert, 2011). Several more species, namely Q. nilgiriensis (Seshadri et al., 1967), Q. himalayae (Mahajan, 1974), Q. solani (Maqbool, 1982), Q. paracti (Ray and Das, 1983), and Tylenchorhynchus maqbooli (Mizukubo et al., 1993), were described as new members of the Quinisulcius genus. Close scrutiny of these descriptions indicates that these species do not manifest any significant differences from Q. capitatus. The only difference mentioned by the authors was the varying number of lip and tail annuli. In the present study, we noted that the number of annuli on the lip or tail region of Q. capitatus are variable and cannot be considered valid characters for species differentiation. In the majority of our specimens, lip annuli were not clearly visible and tail annuli were difficult to count. In fact, most of the tail annuli became faint near the terminus, thereby posing a challenge to accurately count their number. Similarly, the lateral incisures at the level of or past the phasmid were not a constant character. Therefore, we suggest using the robust morphological characters for species differentiation.
Habitat and locality
This population was found in the rhizosphere of grass growing on the headland of a planted wheat field that had been in a crop rotation cycle with potatoes (latitude 49° 52′ 37.4″ N; longitude – 111° 56′ 37.5″ W); Taber Rural Municipality, Alberta, Canada.
Molecular characterization and phylogeny
The sequences of partial 18S (GenBank accession numbers MW029450, MW029451 for G. brevidens; MW023248, MW023249 for Q. capitatus), 28S (MW029449 for G. brevidens, MW023387 for Q. capitatus), and the ITS region of the rRNA (MW029446, MW029447, MW029448 for G. brevidens; MW027537, MW027538 for Q. capitatus) of both species were obtained.
Phylogenetic relationships among the isolates were determined separately for each dataset using Bayesian inference (BI) (Figs. 3-5). The 18S tree presents two distinct main clades (Fig. 3), Clade I is well supported (PP=0.86) and further divided into two subclades. The subclade (I) consists of subfamily Merliniinae and subclade (II) represents subfamily Telotylenchinae. The Canadian population of G. brevidens grouped with other G. brevidens populations from GenBank in subclade (I). However, it is noted that another population of G. brevidens (AY284597) from the Netherlands distantly arranged from the G. brevidens clade. Additionally, sequences of Nagelus obscurus (AY593904, KJ636353, and EU306350), from the Netherlands and Belgium do not cluster together. Therefore, these data suggest that a misidentification is probable and requires a detailed re-evaluation based on integrative taxonomy for ascertaining their species status. In subclade (II), the Q. capitatus grouped with Tylenchorhynchus microphasmis (AY593903), T. maximus, and two unidentified Tylenchorhynchus spp. Since the Quinisulcius sequences deposited in the GenBank were the first sequences deposited for this genus, we anticipate that inclusion of more Quinisulcius sequences will rearrange the position of Q. capitatus. We noted that the sequences of T. leviterminalis (LC540652, EU368585) arranged distantly from the T. leviterminalis clade. Handoo et al. (2014) suggested that T. leviterminalis may consist of a species complex; therefore, a detailed re-evaluation based on integrative taxonomy is required to determine the exact status of these populations.
The 28S tree presents two well-supported (PP = 1.00) main clades (I and II; Fig. 4), including members of the Telotylenchinae (I) subfamily, while clade (II) was formed of subfamily Merliniinae. Our phylogenetic analyses place Q. capitatus within the species of Tylenchorhynchus in Clade (I). However, due to a lack of Quinisulcius sequences, phylogenetically close species cannot be determined. Clade (II) indicates that the Canadian population of G. brevidens grouped with G. brevidens populations from China (MT856989, unpublished), Iran (KP313844, Alvani et al., 2017), South Africa (MN262457, unpublished), Iran (KJ585416, Ghaderi et al., 2014), and Greece (MG770485, Tzortzakakis et al., 2018). However, a few additional populations of G. brevidens from Iran (KP313841, KP313842, KP313843, KP313845, KP313846, Alvani et al., 2017; MN947623, MN947623, unpublished) formed another subclade. The morphological and morphometric information of these last populations were not provided by the authors, which indicates that these populations likely require re-evaluation based on detailed integrative taxonomy. Finally, the ITS tree presents three distinct major clades (Fig. 5). Clade (I) is poorly supported (PP = 0.64) and consists of Tylenchorhynchus species. Very few Geocenamus species have been molecularly characterized; the Canadian population of G. brevidens grouped with G. chengi and unidentified populations of Geocenamus species in clade (II). It is noted that in this tree, Q. capitatus does not cluster within Tylenchorhynchus species but independently appeared as a different, well-supported clade (III) (PP = 1.00).
In the present study, we observed that G. brevidens is a cosmopolitan species reported from several countries. However, all the G. brevidens sequences that have been submitted to GenBank were not supplemented with integrative taxonomic descriptions. Therefore, their true identity is difficult to ascertain. Moreover, molecular information about all the valid species of Quinisulcius is necessary in order to establish their phylogenetic relationship within the Telotylenchinae.
Discussion
Currently, the genus Geocenamus contains over 70 species (Maria et al., 2020), with eight of them found in Canada (Geraert, 2011). Among the latter, G.laminatus (Wu, 1969) Brzeski, 1991 and G. longus (Wu, 1969) Tarjan, 1973 Wu, 1969 were described from Alberta, with G. brevidens being the third species discovered in this province. Geocenamus brevidens is a native American species described by Allen (1955) in the rhizosphere of grass; however, studies have indicated that it has a high rate of occurrence in European countries, followed by Asia and Australia (Table 3).
The pathogenic nature and soil preference of G. brevidens were previously examined by several researchers, who demonstrated that this species requires relatively cooler soils and low temperature for achieving an optimal reproduction rate. Moreover, the damage potential of G. brevidens increased in clay sand and sandy loam soils (Griffin, 1994; Griffin and Asay, 1996; Malek, 1980; Mayol, 1981; Smiley et al., 2006). In the present study, we detected high numbers of G. brevidens in the grass soil, but relatively low numbers in the farmed field. The lower population density in the farmed field could be related to the amount of disturbance in the soil: the field was under the agricultural practice of tillage and crop rotation, whereas the grass on the headland remained undisturbed.
In the USA, G. brevidens causes stunting in small cereal crops (Langdon et al., 1961), chlorotic tillers in wheat (Mayol, 1981), reduced growth in wheatgrass (Griffin and Asay, 1996), and reduced yield in wheat (Smiley et al., 2006). Additionally, G. brevidens has been found associated with the root lesion nematodes in cultivated cereal fields of Australia (Owen et al., 2010; Thompson et al., 2008). In European and Asian countries, the presence of G. brevidens has been recorded both in agricultural and horticultural fields (Alvani et al., 2017; Castillo et al., 1996; Čermák et al., 2011; Kasapoğlu-Uludamar et al., 2018; Palomares-Rius et al., 2015; Tobar et al., 1995), although no considerable plant damage was associated with this species. Considering the observed damage caused by this species in the USA, we hypothesize that G. brevidens has a much higher impact on agricultural crops in its originally described geographic range.
The genus Quinisulcius contains over 17 valid species, but none of them was ever reported from Canada (Geraert, 2011). Hence, our study presents the first record of Q. capitatus in Canada. This species was originally described from the USA (Allen, 1955) and is widely distributed throughout the American continent, followed by Europe and Africa (Table 3). It has been demonstrated that Q. capitatus reproduce well in cooler soils and require low temperature for survival (Malek, 1980). The soil preference of Q. capitatus was studied by Maqbool and Hashmi (1986), who found that sandy clay soil is best for achieving a high level of infestation in greenhouse-grown potatoes. Quinisulcius capitatus has been reported in association with Pratylenchus zeae to cause sorghum root rot and plant growth decline (Cuarezma-Teran and Trevathan, 1985). Moreover, in the presence of Helicotylenchus dihystera this Quinisulcius species reduced the potato tuber yield up to 14 to 29% (Krishna Prasad and Sharma, 1985). In our study, we found a Q. capitatus population in the headland of a farmed field that was previously rotated with potatoes. The discovery of Q. capitatus in the vicinity of a cultivated field calls for additional surveys that will likely uncover other populations of Q. capitatus.
In this work, populations of G. brevidens and Q. capitatus species were examined based on morphological, quantitative (morphometrical), and molecular characters. In our 28S phylogenetic trees, G. brevidens sequences formed two separated subclades. Our data of G. brevidens are coincident with the original descriptions as well as with other populations that have been described using integrative taxonomy (Ghaderi et al., 2014; Tzortzakakis et al., 2018). Consequently, it is imperative to further investigate the populations that formed the second subclade. It is likely that these species belong to other close species of Geocenamus rather than to G. brevidens. We agree with Handoo et al. (2014) who stated that stunt nematodes present variability in morphological characteristics and overlapping morphometrical values may lead to potential misidentification. Therefore, the only definitive solution for this situation will be to sequence topotype population of G. brevidens that may clarify this situation. Moreover, in our phylogenetic trees, Q. capitatus grouped with Tylenchorhynchus species; the closely related species cannot be determined due to the lack of Quinisulcius sequences in GenBank. Based on integrative taxonomical characterization, we propose our G. brevidens and Q. capitatus as standard and reference populations for each species until topotype specimens become available and molecularly characterized.
The current knowledge of the occurrence and distribution of non-target nematode species in Alberta is very scarce. Here, we provide the descriptions of two stunt nematodes based on an integrative taxonomical approach. Data on geographical distribution and host plant associations of these species are also provided and discussed. The present study will help to update the taxonomic records of G. brevidens and Q. capitatus from Alberta, Canada. Moreover, our light micrographs and sequence-based information will enable prompt identification of these species. Last, it will be important for future research to conclusively determine whether these stunt nematodes should be incorporated into nematode management programs.