<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, a MEMS based capacitive nasal sensor system for measuring Respiration Rate (RR) of human being is developed. At first two identical diaphragm based MEMS capacitive nasal sensors are designed and virtually fabricated. A proposed schematic of the system consists of signal conditioning circuitry alongwith the sensors is described here. In order to measure the respiration rate the sensors are mounted below Right Nostril (RN) and Left Nostril (LN), in such a way that the nasal airflow during inspiration and expiration impinge on the sensor diaphragms. Due to nasal airflow, the designed square diaphragm of the sensor is being deflected and thus induces a corresponding change in the original capacitance value. This change in capacitance value is to be detected by a correlated- double-sampling (CDS) capacitance-to-voltage converter is designed for a precision interface with a MEMS capacitive pressure sensor, followed by an amplifier and a differential cyclic ADC to digitize the pressure information. The designed MEMS based capacitive nasal sensors is capable of identifying normal RR (18.5±1.5 bpm) of human being. The design of sensors and its characteristics analysis are performed in a FEA/BEA based virtual simulation platform.</p></abstract>

In this paper, a MEMS based capacitive nasal sensor system for measuring Respiration Rate (RR) of human being is developed. At first two identical diaphragm based MEMS capacitive nasal sensors are designed and virtually fabricated. A proposed schematic of the system consists of signal conditioning circuitry alongwith the sensors is described here. In order to measure the respiration rate the sensors are mounted below Right Nostril (RN) and Left Nostril (LN), in such a way that the nasal airflow during inspiration and expiration impinge on the sensor diaphragms. Due to nasal airflow, the designed square diaphragm of the sensor is being deflected and thus induces a corresponding change in the original capacitance value. This change in capacitance value is to be detected by a correlated- double-sampling (CDS) capacitance-to-voltage converter is designed for a precision interface with a MEMS capacitive pressure sensor, followed by an amplifier and a differential cyclic ADC to digitize the pressure information. The designed MEMS based capacitive nasal sensors is capable of identifying normal RR (18.5±1.5 bpm) of human being. The design of sensors and its characteristics analysis are performed in a FEA/BEA based virtual simulation platform.

A New Scheme for Determination of Respiration Rate in Human Being using MEMS Based Capacitive Pressure Sensor: Simulation Study

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In this paper, a MEMS based capacitive nasal sensor system for measuring Respiration Rate (RR) of human being is developed. At first two identical diaphragm...

A New Scheme for Determination of Respiration Rate in Human Being using MEMS Based Capacitive Pressure Sensor: Simulation Study

Published Online: Feb 15, 2020

Page range: 1 - 5

DOI: https://doi.org/10.21307/ijssis-2019-083

© 2019 Authors., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.