Cite

Figure 1:

MIMO radar probability of detection variations with respect to the antenna variation.
MIMO radar probability of detection variations with respect to the antenna variation.

Figure 2:

MIMO radar output SNR variations with respect to the antenna variation.
MIMO radar output SNR variations with respect to the antenna variation.

Figure 3:

Radar setup with stand-alone instruments.
Radar setup with stand-alone instruments.

Figure 4:

(A) Spectrum of the reference signal at VSA; (B) reference signal at VSA.
(A) Spectrum of the reference signal at VSA; (B) reference signal at VSA.

Figure 5:

(A) Spectrum of the received signal at VSA; (B) received signal at VSA.
(A) Spectrum of the received signal at VSA; (B) received signal at VSA.

Figure 6:

(A) Radar test range; (B) flat plate (target) placed over Pylon.
(A) Radar test range; (B) flat plate (target) placed over Pylon.

Figure 7:

Range measurement.
Range measurement.

Figure 8:

WARP SDR hardware platform (http://warpproject.org/trac/wiki/GettingStarted/WARPv3/Hardware).
WARP SDR hardware platform (http://warpproject.org/trac/wiki/GettingStarted/WARPv3/Hardware).

Figure 9:

2 × 2 MIMO radar setup.
2 × 2 MIMO radar setup.

Figure 10:

(A) Transmitted signal from SDR platform; (B) received signal at the SDR platform.
(A) Transmitted signal from SDR platform; (B) received signal at the SDR platform.

Figure 11:

Target characterization using 2 × 2 MIMO radar.
Target characterization using 2 × 2 MIMO radar.
eISSN:
1178-5608
Language:
English
Publication timeframe:
Volume Open
Journal Subjects:
Engineering, Introductions and Overviews, other