VALIDATION OF THE FIB 2010 AND RILEM B4 MODELS FOR PREDICTING CREEP IN CONCRETE

[1] CEB-FIP (2012). CEB-FIP Model Code 2010 (2012) Final Draft. Federation Internationale Du Béton, Bulletins 65 & 66, Lausanne, 125–155. Search in Google Scholar

[2] RILEM Model B4 (2015). Model B4 for creep, drying shrinkage and autogenous shrinkage of normal and high strength concretes with multi-decade applicability. Draft Recommendation: TC-242-MDC MultiDecade Creep and Shrinkage of Concrete: Material Model and Structural Analysis (2015), prepared by Bazant, Z. P., Materials and Structures, 48, 753–770. Search in Google Scholar

[3] CEB-FIP (1990). Comité Euro-International du Béton, CEB-FIP Model Code 1990. First Draft, Lausanne, Mar., 2–3, 2–28 to 2–40 (Information Bulletin No. 195). Search in Google Scholar

[4] CEB-FIP (1999). Federation Internationale Du Béton. Structural Concrete: Textbook on behaviour, design and performance. Updated Knowledge of CEB/FIP Model Code 1990, FIB Bulletin 2(2), Lausanne, 35–52. Search in Google Scholar

[5] RILEM Model B3 (1995). Creep and shrinkage model for analysis and design of concrete structures - Model B3. Draft RILEM Recommendation, prepared by Bazant, Z. P. and Baweja, S., Materials and Structures, 28, 357–365, 415–430, 488–495, with Errata in 29 (1996), 126. Search in Google Scholar

[6] Wendner R., Hubler M. H. and Bazant Z. P. (2013). The B4 Model for multi-decade creep and shrinkage prediction. Proceedings of the Ninth International Conference on Creep, Shrinkage and Durability Mechanics (CONCREEP-9), 429–436.10.1061/9780784413111.051Search in Google Scholar

[7] BS EN 1992-1-1 (2004). Eurocode 2: Design of concrete structures, Part 1-1: General – Common Rules for Buildings and Civil Engineering Structures. London: British Standards Institution (BSI). Search in Google Scholar

[8] Fanourakis G.C. and Ballim Y. (2006, April). The influence of aggregate stiffness on the creep of concrete. Concrete Beton, 112, 5–12. Search in Google Scholar

[9] Bazant Z. P. and Panula L. (1979). Practical prediction of time dependent deformations of concrete. Parts I-VI, Materials and Structures, 12, 169–183. Search in Google Scholar

[10] Fanourakis G.C. (1998). The influence of aggregate stiffness on the measured and predicted creep behaviour of concrete. (MSc (Eng) dissertation, University of the Witwatersrand). Johannesburg. Search in Google Scholar

[11] Fanourakis G. C. and Ballim Y. (2006). An assessment of the accuracy of nine design models for predicting creep in concrete. Journal of the South African Institution of Civil Engineering, 48(4), 2–8. Search in Google Scholar

[12] Fanourakis G. C. (2011). Validation of international concrete creep prediction models by application to South African concretes. Journal of the South African Institution of Civil Engineering, 53(2), 23–30. Search in Google Scholar

[13] Fanourakis G.C. and Ballim Y. (2003). Predicting creep deformation of concrete: a comparison of results from different investigations. Proceedings of The 11^th FIG International Symposium on Deformation Measurements, Santorini, Greece, 25–28 May, 591–598. Search in Google Scholar

[14] Wendner R., Hubler M. H. and Bazant Z. P. (2015). Statistical justification of Model B4 for multi-decade concrete creep using laboratory and bridge databases and comparisons to other models. Materials and Structures, 48, 815–833.10.1617/s11527-014-0486-1 Search in Google Scholar

[15] Gardner N. J. and Lockman M. J. (2001). Design provisions for drying shrinkage and creep of normal strength concrete. ACI Materials Journal, 98(2), 159–167. Search in Google Scholar

[16] American Concrete Institute (ACI) (1992). Prediction of creep, shrinkage and temperature effects in concrete structures. ACI Committee 209, Subcommittee II Report ACI 209R-92, Detroit, March, 1–12. Search in Google Scholar

[17] BS 8110 (1985). Structural use of concrete, part 2, code of practice for design and construction. London, British Standards Institution. Search in Google Scholar

[18] SABS 0100 (1992). Code of practice for the structural use of concrete, part 1: design. Pretoria: South African Bureau of Standards. Search in Google Scholar

[19] AS 3600 (1988). Concrete structures – AS 3600-1988. Standards Association of Australia, North Sydney, 8–14, 32–34. Search in Google Scholar

[20] AS 3600 (2001). Concrete structures – AS 3600-2001. Standards Association of Australia, Sydney. Search in Google Scholar

[21] AS 3600 (2009). Concrete structures – AS 3600-2009. Standards Association of Australia, Sydney. Search in Google Scholar

[22] Gardner N. J. (2004). Comparison of prediction provisions for drying shrinkage and creep of normal strength concretes. Canadian Journal for Civil Engineering, 31(5), 767–775.10.1139/l04-046 Search in Google Scholar

[23] Gardner N. J. and Zhao J. W. (1993). Creep and shrinkage revisited. ACI Materials Journal, 90(3), 236–246. Search in Google Scholar

[24] CEB-FIP (1970). Comité Euro-International du Béton – Federation Internationale De La Precontrainte, International recommendations for the design and construction of concrete structures. Principles and Recommendations, FIP Sixth Congress, Prague, 27–28. Search in Google Scholar

[25] CEB-FIP (1978), Comité Euro-International du Béton – Federation Internationale De La Precontrainte, International system of unified standard codes of practice for structures. Volume II - CEB-FIP Model Code for Concrete Structures, 3^rd ed. Lausanne, 56, 331–344.Search in Google Scholar